• 한국정밀공학회지
• /
• 제27권11호
• /
• pp.46-56
• /
• 2010

The present research works investigated into the low velocity impact characteristics of DP 780 high strength steel sheet with 1.7 mm in thickness subjected to free boundary condition using three-dimensional finite element analysis. Finite element analysis was carried out via ABAQUS explicit code. Hyper-elastic model and the damping factor were introduced to improve an accuracy of the FE analysis. An appropriate FE model was obtained via the comparison of the results of the FE analyses and those of the impact tests. The influence of the impact energy and nose diameter of the impact head on the force-deflection curves, impact time, absorption characteristics of the impact energy, deformation behaviours, and stress-strain distributions was quantitatively examined using the results of FE analysis. The results of the FE analysis showed that the absorption rate of impact energy lies in the range of the 70.7-77.5 %. In addition, it was noted that the absorption rate of impact energy decreases when the impact energy increases and the nose diameter of the impact head decreases. The local deformation of the impacted region was rapidly increased when the impact energy was larger than 76.2 J and the nose diameter was 20 mm. A critical impact energy, which occur the instability of the DP780, was estimated using the relationship between the plastic strain and the impact energy. Finally, characteristics of the plastic energy dissipation and the strain energy density were discussed.

• KIEAE Journal
• /
• 제14권1호
• /
• pp.39-48
• /
• 2014

In the previous test, the verification of the standard floor impact source was carried out comparing the physical characteristics with living impact sources. The result was appeared the validation of the standard impact source was very low because of differences of physical characteristics. This study aims to evaluate annoyance and loudness of standard impact source which is used for the measurement of floor impact sound, and to compare the annoyance and loudness of living impact sources which are produced in real life. The impact sources considered are tapping machine, tire and impact ball as standard sources, and nine real sources which were chosen from the existing researches. The result showed differences of annoyance and loudness between standard impact sources and living impact sources, which means the standard impact sources may rate the performance of floor system inappropriately. In the future, the rating method should be examined how the standard impact sources are similar with real sources in the point of rating the performance of floor system.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 1999년도 춘계종합학술대회
• /
• pp.389-393
• /
• 1999

디바이스 효율에 커다란 영향을 미치고 있는 임팩트이온화현상의 정확한 모델이 디바이스 시뮬레이션에 필수적인 요소가 되고 있다. 최근에는 정확한 GaAs 임팩트이온화 모델을 위해 각 에너지 범위에 파라서 7.8과 5.6의 지수를 갖는 수정된 Keldysh 공식이 사용되고 있다. 그러나 이 모델 또한 임팩트이온화의 방향성을 무시한 등방성 모델로서 저에너지에서 이방성을 보이는 임팩트이온화모델로서는 부적합하다. 임팩트이온화율은 낮은 전자에너지에서는 강한 이방성 성질을 나타내는 반면에, 임팩트이온화현상이 자주 발생하는 높은 에너지 범위에서는 등방성이 된다. 임팩트이온화율을 계산하기 위하여 Fermi 황금법칙과 의사 포텐셜방법에 의하여 계산된 full 에너지 밴드구조를 사용하였다. Form factor 및 실험값을 비교하였으며, 방향에 따른 전도대의 에너지 밴드 구조를 <100>, <110>, <111>의 방향에 대하여 조사하였다. 결과적으로, 임팩트이온화의 문턱에너지가 이방성을 갖음을 알 수 있었다. 또한 상대적으로 낮은 에너지 즉, 문턱에너지 근처에서 임팩트이온화율이 더욱 심하게 변화함을 알 수 있다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 1999년도 추계종합학술대회
• /
• pp.552-554
• /
• 1999

포논산란과 임팩트이온화 모델은 풀밴드 모델과 페르미 황금법칙을 이용한 고에너지 영역에서 hot carrier 전송을 해석하기 위해서 제시되어 왔다. 본 연구에서는 77K와 300k에서 실제에너지 밴드 구조를 이용한 Si의 임팩트이온화 과정에 대해서 온도 의존성을 조사했다. 풀밴드 모델은 local form factors을 이용한 의사포텐셜방법에서 얻어지고, 산란율 계산에 이용된다. 정확한 임팩트이온화율 계산은 파동벡터와 주파수에 의존하는 유전함수를 필요로 한다. 포논 산란율은 상태밀도에 선형적으로 의존하기 때문에 포논산란율과 상태밀도의 비에 대한 선형함수 유도에 의해서 구해진다 임팩트이온화율 $P_{ii}$ 는 first principle's theory로부터 계산되어지고, 수정된 Keldysh 공식에 의해서 최적화되었다.

• 설비공학논문집
• /
• 제23권11호
• /
• pp.747-753
• /
• 2011

The purpose of this study was to quantify the impact of the ventilation rate on heating and cooling energy consumption in a detached house. For it, a series of simulations for the application of the diverse ventilation rate (ACH) were computationally conducted for a prototypical detached residential building in the cold climate (Detroit, Michigan) and hot/humid climate (Miami, Florida) of USA. Analysis revealed that ventilation is a significant heat losing source in the cold climate; thus, the higher ventilation rate significantly increases the heating energy consumption and energy cost in the cold climate; while the impact on energy increase for heating and cooling energy consumption is similar in hot/humid climate with less significancy compared to cold climate. The research outcome of this study could be a fundamental data for determining the optimal ventilation rate in terms of indoor air quality, but also building energy performance well.

• 융합경영연구
• /
• 제12권3호
• /
• pp.1-12
• /
• 2024

Purpose: As a major economy attracting foreign investment, China is currently facing significant international economic pressure due to the appreciation of the RMB. Additionally, China is at a critical period of socio-economic development, where foreign direct investment (FDI) plays an indispensable role in stabilizing economic growth, adjusting industrial structure, and promoting economic transformation. Research design, data and methodology: This paper focuses on the relationship between RMB exchange rate expectations and FDI. It examines the magnitude of their relationship through empirical research using cointegration tests, Granger causality tests, and BVAR (Bayesian Vector Autoregression) analysis. Results: The comprehensive study of the empirical results in this paper concludes that there is a long-term cointegrated relationship between China's RMB exchange rate expectations and foreign direct investment, indicating that their relationship is stable in the long run. It is also found that RMB exchange rate expectations have a significantly positive impact in the short term, but this impact is not significant in the long term. Conclusions: The paper also considers the possibility of establishing a China-EU Free Trade Area in the future and offers policy recommendations regarding RMB exchange rate expectations and foreign direct investment.

• 환경영향평가
• /
• 제31권6호
• /
• pp.359-368
• /
• 2022

개발사업의 부정적인 영향을 감소시킬 수 있는 저감방안의 실효성을 높이기 위해서는 이행률을 높이는 것이 필수적이다. 환경영향평가에서 자연생태환경 동물상 분야의 경우 저감방안에 대한 실효성 문제가 꾸준히 제기되고 있음에도 불구하고 현재 진행되고 있는 개발사업의 이행평가 연구는 미흡한 실정이다. 따라서 본 연구는 환경영향평가사업의 대표적인 유형인 도시 및 도로의 개발사업을 대상으로 자연생태환경 동물상 분야의 저감방안 이행률을 평가하고, 각 저감방안별 이행률 차이가 발생하는 원인에 대해 파악하고자 하였다. 도시 및 도로개발사업 저감방안 이행률은 각 56.0%와 64.4%로 낮게 나타났다. 사후 모니터링은 모든 사업유형에서 이행률이 가장 높게 나타났으나, 서식지 조성과 사고예방 저감방안은 낮게 나타났다. 또한, 저감방안 이행률은 보고서 내 기재된 저감방안 내용이 구체적일 때 높음을 알 수 있었다. 본 연구를 통해 환경영향평가 자연생태환경 동물상 분야 저감방안의 이행률을 높이기 위해서는 평가서 작성 시 대상지의 환경적, 지리적 특성을 구체적으로 반영할 필요가 있으며, 실제로 이행할 수 있도록 상세하게 서술할 필요가 있음을 알 수 있었다. 더 나아가 자연환경에 부정적인 영향을 감소시키기 위해 도입된 환경영향평가 제도의 실효성을 증진하기 위한 기초 근거로서 본 연구가 활용될 수 있을 것으로 판단된다.

• Journal of Advanced Research in Ocean Engineering
• /
• 제2권1호
• /
• pp.28-39
• /
• 2016

This paper provides theoretical and experimental results to verify the crashworthiness of FH32 high-strength steel for arctic marine structures against ice impact. Assuming that side-shell structures of the Korean arctic research vessel, ARAON, with ice-notation PL10, collide with sheet ice, one-third-scale test specimens with a single transverse frame are manufactured. Impact-bending tests were conducted using a rigid steel striker that mimics sheet ice. Drop height was calculated by considering the speed at which sheet ice is rammed. Prior to impact-bending tests, tensile coupon tests were conducted at various temperatures. The impact-bending tests were carried out using test specimens fully fixed to the inside bottom frame of a cold chamber. The drop-weight velocity and test specimen deformation speed were measured using a high-speed camera and digital image correlation analysis (DICA). Numerical simulations were carried out under the same conditions as the impact-bending tests. The simulation results were in agreement with the test results, and strain rate was a key factor for the accuracy of numerical simulations.

• 환경영향평가
• /
• 제22권3호
• /
• pp.265-276
• /
• 2013

This study assessed documentation status of each environmental assessment items by analyzing the 243 case of marine EIS on the Consultation System of Sea Area Utilization. Observed rate of tidal elevation, current, temperature, salinity in maine environment were below 20%. The EFDC tool is applied substantially in hydrodynamic modeling. The verification process, however, is very insufficient using the recent observed data. Also, in-situ assessment rate of pelagic organism such as phytoplankton was below 50%, and assessment for Chlorophyll a was not accomplished. Ecological index evaluation for zooplankton and benthic ecosystem were not considered in statements. Especially, the rational assessment on the fisheries resources and protected species were very limited. It was necessary that the core assessment items (checklists) were established for environmental scoping. Furthermore, suggestion of information related to development, regional coastal management plan, aquaculture farms, and facilities were enhanced. The redundancy problem of proceedings between Environmental Impact Assessment and Sea Area Utilization Assessment System was improved.

• 한국재료학회지
• /
• 제12권1호
• /
• pp.10-15
• /
• 2002

Melt blends of maleic anhydride grafted polypropylerle(PP-g-MA) and Nylon 6 were prepared to study the influence of chemical reaction between the two polymer components. By adding the MA grafted polystyrene pold (ethylene/butadiene) and polystyrene[SEBS-g-MA] as the compatible modifiers to reinforce the impact resistance, the Izod impact strength, high rate impact strength and morphology were studied. The notched Izod impact strength increased with the content of PP-g-MA and SEBS- g-MA. The energy of high rate impact strength increased as the thickness of specimen increased, while, it increased as the specimen displacement decreased. In the morphology observed by SEM, finally, we confirmed the improvement of the compatibilization and interfacial adhesion with the content of SEBS-g-MA. The continuous phase of PP-g-MA was the main cause of the modified properties.