• Title/Summary/Keyword: Immunity to Error

Search Result 33, Processing Time 0.029 seconds

Decision Feedback Equalizer based on Maximization of Zero-Error Probability (영확률 최대화에 근거한 결정궤환 등화)

  • Kim, Nam-Yong
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.36 no.8C
    • /
    • pp.516-521
    • /
    • 2011
  • In this paper, a nonlinear algorithm that maximizes zero-error probability (MZEP) with decision feedback (DF) is proposed to counteract both of severely distorted multi-path fading effect and impulsive noise. The proposed MZEP-DF algorithm has shown the immunity to impulsive noise and the ability of the feedback filter section to cancel the remaining intersymbol interference as well. Compared with the linear MZEP algorithm, it yields above 10 dB enhancement of steady state MSE performance in severely distorted multipath fading channels with impulse noise where the least mean square (LMS) algorithm does not converge below -3dB of MSE.

Computing and Reducing Transient Error Propagation in Registers

  • Yan, Jun;Zhang, Wei
    • Journal of Computing Science and Engineering
    • /
    • v.5 no.2
    • /
    • pp.121-130
    • /
    • 2011
  • Recent research indicates that transient errors will increasingly become a critical concern in microprocessor design. As embedded processors are widely used in reliability-critical or noisy environments, it is necessary to develop cost-effective fault-tolerant techniques to protect processors against transient errors. The register file is one of the critical components that can significantly affect microprocessor system reliability, since registers are typically accessed very frequently, and transient errors in registers can be easily propagated to functional units or the memory system, leading to silent data error (SDC) or system crash. This paper focuses on investigating the impact of register file soft errors on system reliability and developing cost-effective techniques to improve the register file immunity to soft errors. This paper proposes the register vulnerability factor (RVF) concept to characterize the probability that register transient errors can escape the register file and thus potentially affect system reliability. We propose an approach to compute the RVF based on register access patterns. In this paper, we also propose two compiler-directed techniques and a hybrid approach to improve register file reliability cost-effectively by lowering the RVF value. Our experiments indicate that on average, RVF can be reduced to 9.1% and 9.5% by the hyperblock-based instruction re-scheduling and the reliability-oriented register assignment respectively, which can potentially lower the reliability cost significantly, without sacrificing the register value integrity.

A Study on the Current Sensor Using an Optical Modulator with BSO (BSO와 ZnSe를 광 변조기로 이용한 전류센서에 관한 연구)

  • 김요희;이대영
    • Journal of the Korean Institute of Telematics and Electronics A
    • /
    • v.28A no.9
    • /
    • pp.721-728
    • /
    • 1991
  • In this paper, a magneto-optic modulator has been designed by using single crystal BSO and polycrystal ZnSe as Faraday cells. And practical core-type optical current sensors using pure iron and permalloy have been prepared and experimented. In order to obtain efficient magnetic field detection, LED(NEC OD08358, 0.87 $\mu$m) was used as optical source, PIN-PD(OD-8454)as optical receiver and multi-mode optical fiber (100/140$\mu$m) as transmission line. The characteristics matrix of the optical element was calculated by Stokes parameter, and optic modulation characteristics equations were derived by Muller matrix. Electromagnetic analysis program (FLUX 2D, micro VAX 3600) by finite element method was used to find the magnetic flux density around the core. The measuring error of the output voltage to input current has been masured below 5% in the range of 50A to 1000A. As the temperature was changed from -20$^{\circ}C$ to 60$^{\circ}C$, the maximum measurement error of the optical output has been found to be 0.5% at 60$^{\circ}C$. These experimental results show good temperature and linearity characteristics. The SNR of the overall system was 47dB in case of 600A (250.2 Oe) conductor current and the system has good noise immunity.

  • PDF

An Efficient DSA Signature Scheme Resistant to the Fault Analysis Attack (오류 분석 공격에 대응하는 효율적인 DSA 서명 기법)

  • Bae, Ki-Seok;Baek, Yi-Roo;Moon, Sang-Jae;Ha, Jae-Cheol
    • Journal of the Korea Institute of Information Security & Cryptology
    • /
    • v.20 no.5
    • /
    • pp.49-57
    • /
    • 2010
  • The fault cryptanalysis is a physical attack in which the key stored inside of the device can be extracted by occurring some faults when the device performs cryptographic algorithm. Since the international signature standard DSA(Digital Signature Algorithm) was known to be vulnerable to some fault analysis attacks, many researchers have been investigating the countermeasure to prevent these attacks. In this paper we propose a new countermeasure to compute DSA signature that has its immunity in the presence of faults. Since additional computational overhead of our proposal is only an inverse operation in signature process, the proposed DSA scheme can be implemented more efficiently compared to previous countermeasures.

A Study of Cell Latch-up Effect Analysis in SRAM Device (SRAM소자의 Cell Latch-up 효과에 대한 해석 연구)

  • Lee Hoong-Joo;Lee Jun-Ha
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.6 no.1
    • /
    • pp.54-57
    • /
    • 2005
  • A soft error rate neutrons is a growing problem fur terrestrial integrated circuits with technology scaling. In the acceleration test with high-density neutron beam, a latch-up prohibits accurate estimations of the soft error rate (SER). This paper presents results of analysis for the latch-up characteristics in the circumstance corresponding to the acceleration SER test for SRAM. Simulation results, using a two-dimensional device simulator, show that the deep p-well structure has better latch-up immunity compared to normal twin and triple well structures. In addition, it is more effective to minimize the distance to ground power compared with controlling a path to the $V_{DD}$ power.

  • PDF

An Inductive-coupling Link with a Complementary Switching Transmitter and an Integrating Receiver

  • Jeong, Youngkyun;Kim, Hyun-Ki;Kim, Sang-Hoon;Kwon, Kee-Won;Chun, Jung-Hoon
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • v.14 no.2
    • /
    • pp.227-234
    • /
    • 2014
  • A transceiver for a high-speed inductive-coupling link is proposed. The bi-phase modulation (BPM) signaling scheme is used due to its good noise immunity. The transmitter utilizes a complementary switching method to remove glitches in transmitted data. To increase the timing margin on the receiver side, an integrating receiver with a pre-charging equalizer is employed. The proposed transceiver was implemented via a 130-nm CMOS process. The measured timing window for a $10^{-12}$ bit error rate (BER) at 1.8 Gb/s was 0.33 UI.

An Image Data Compression Algorithm for a Home-Use Digital VCR Using SBC with Block-Adaptive Quantization (SBC와 블럭 적응 양자화를 이용한 가정용 디지탈 VCR 영상 압축 알고리듬)

  • 김주희;서정태;박용철;이제형;윤대희
    • Journal of the Korean Institute of Telematics and Electronics B
    • /
    • v.31B no.9
    • /
    • pp.124-132
    • /
    • 1994
  • An image data compression method for a digital VCR must satisfy special requirements such as high speed playback. various edting capabilities and error concealment to provide immunity to tape dropouts. Taking these requirements requirements into consideration, this paper proposes a new interframe subband coding algorithm for a digital VCR. In the proposed method, continuous input images are fist partitioned into four frequency bands. The lowest frequency subband is coded with 3-D block adaptive quantization that removes the level redundancy within each level. The other higher frequency subbands are coded by an intraframe coding method using the property of the human visual system. To keep reasonable image quality in high speed palyback, a segment forming method in the frequency domaing is also proposed Computer simulation results demonstrate that the proposed algorithm has the potential of achieving virtually lossless compression in normal play and produces an image with less mosaic errors in high speed play.

  • PDF

A Study on Steering Performance Improvement of the AGV using Cell-Mediated Immune Algorithm (세포성 면역 알고리즘을 이용한 AGV의 조향 성능 향상에 관한 연구)

  • Lee, Y.J.;Sohn, J.H.;Lee, J.W.;Cho, H.C.;Lee, K.S.
    • Proceedings of the KIEE Conference
    • /
    • 2000.07d
    • /
    • pp.2572-2574
    • /
    • 2000
  • In this paper, cell-mediated immune algorithm(CMIA) controller was proposed and applied for the autonomous guided vehicle(AGV) driving. It was based on specific immune response of the biological immune system which is the cell-mediated immunity. To verify the performance of the designed CMIA controller, some experiments were performed for the control of steering and speed of AGV. And then the displacement and speed tracking error of the AGV was mainly investigated. As results, the capability of realization and reliableness were proved by comparing the response characteristics of the classical controller with the proposed CMIA controller.

  • PDF

Improving the PTS Method for the PAPR Reduction in the OFDM System (OFDM 시스템에서 PAPR 감소를 위한 PTS 기법의 성능개선)

  • Kim, Dong-Seek;Kwak, Min-Gil;Cho, Hyung-Rae
    • Journal of Advanced Marine Engineering and Technology
    • /
    • v.34 no.8
    • /
    • pp.1165-1171
    • /
    • 2010
  • The OFDM system has better characteristics in transmission rate, power efficiency, bandwidth efficiency, impulse-noise immunity, and narrow band interference immunity etc. in comparison with other conventional systems. However, high PAPR of an OFDM signals causes some serious non-linear processing of RF amplifier. And performance of the communication system gets worse. Therefore, various methods reducing PAPR of an OFDM skills such as the clipping method, block coding method, and phase rotation method etc. have been researched. In this paper, we propose a high-speed adaptive PTS method which eliminates high PAPR. And we compare the proposed method with other conventional methods. The proposed method has decreased quantity of calculation compare with an adaptive PTS method. Of course, The more its calculation amount is decreased, the more its BER characteristic is not better than an adaptive PTS method. However, keeping up satisfactory BER performance, we highly improved calculation amount of a PTS method.

Optimum and Sub-optimum Decoding Methods of Space-Time Trellis Coded Code Division Multiple Access Systems (시공간 트렐리스 부호화 CDMA 시스템의 최적, 준최적 복호 방식과 성능 연구)

  • Ki, Young Min;Kim, Dong Ku
    • Journal of Advanced Navigation Technology
    • /
    • v.6 no.2
    • /
    • pp.130-137
    • /
    • 2002
  • We present Space-Time Trellis Coded Code Division Multiple Access systems, which maintain the full diversity and coding gain of Space-Time Trellis Codes(STTC) and have the immunity to performance degradation caused by multipath fading. These STTC CDMA systems are constructed by adding the spreading and despreading processes of PN codes to STTC systems. In multipath fading channels, delay spreaded signals are detected and combined, then decoded. According to the combining and decoding methods, there are four decoding methods. There are optimum ML decoding without combining, adding multipath signals in each receive antenna before decoding, combining multi path signals in each antenna before decoding, and combining all received signals before decoding. Performance of these methods is proportional to complexity. Besides, all methods are shown to compensate the irreducible error rate which appears in multipath fading channels.

  • PDF