• Geophysics and Geophysical Exploration
• /
• v.20 no.1
• /
• pp.33-42
• /
• 2017

Recently, the grounded electrical-source airborne transient electromagnetic (GREATEM) system with high power source was introduced to achieve deeper investigation depth and to overcome high noise level. Although the GREATEM is a transient electromagnetic system using a long grounded wire as the transmitter, GREATEM data have been interpreted with 1D earth models because 2D or 3D modeling and inversion of vast airborne data are complicated and expensive to calculate. Generally, 1D inversion is subsequently applied to every survey point and combining 1D images together forms the stitched conductivity-depth image. However, the stitched models often result in abrupt variations in neighboring models. To overcome this problem, laterally constrained inversion (LCI) has been developed in inversion of ATEM data, which can yield layered sections with lateral smooth transitions. In this study, we analysed the GREATEM data through 1D numerical modeling for a curved grounded wire source. Furthermore, we developed a laterally constrained inversion scheme for continuous GREATEM data based on a layered earth model. All 1D data sets and models are inverted as one system, producing layered sections with lateral smooth transitions. Applying the developed LCI technique to the GREATEM data, it was confirmed that the laterally constrained inversion can provide laterally smooth model sections that reflect the layering of the survey area effectively.

• Geophysics and Geophysical Exploration
• /
• v.25 no.3
• /
• pp.109-119
• /
• 2022

The computational efficiency of reverse time migration (RTM) based on numerical modeling is not secured due to the high-frequency band of several hundred Hz or higher for data acquired through a three-dimensional (3D) ultra-high-resolution (UHR) seismic survey. Therefore, this study develops an RTM program to derive high-quality 3D geological structures using UHR seismic data. In the traditional 3D RTM program, an excitation amplitude technique that stores only the maximum amplitude of the source wavefield and a domain-limiting technique that minimizes the modeling area where the source and receivers are located were used to significantly reduce memory usage and calculation time. The program developed through this study successfully derived a 3D migration image with a horizontal grid size of 1 m for the 3D UHR seismic survey data obtained from the Korea Institute of Geoscience and Mineral Resources in 2019, and geological analysis was conducted.

• Journal of Korean Society for Quality Management
• /
• v.40 no.4
• /
• pp.513-530
• /
• 2012

Purpose: The requirement for legal services is going up by modern people living in the era of complexity and variety who want to resolve legal conflicts between individuals and improve their personal rights. Methods: In this study, we used both literature and empirical researches to achieve our goals. In literature research, concept of service quality, method of measuring service quality, and dimension of service quality were explored, relationship among service quality, customer satisfaction, and customer loyalty and hypothesis was made based on the above, and tested. To test the conceptual framework, structural equation modeling (SEM) has been used to analyze the data collected from 252 customers of Judicial Agents's Service. Results: This result is not consistent with that of advanced study; it was found that service has significant influence on customer trust, and the trust also has significant influence on customer satisfaction and loyalty. Conclusion: This study has limitations in terms of restricted service sectors and measuring methods. For this reason, the followings are needed to be considered for interpretation and generalization of the study results. We believe that further studies are needed to investigate other service areas as well as legal service at the same time, and study target which is limited to Gangwon Province needs to be expanded for more accurate investigation. In addition, in-depth follow-up study should be proceeded considering variables such as customer value, conversion cost, and image of service providers.

• Journal of the Korea Computer Industry Society
• /
• v.7 no.5
• /
• pp.455-466
• /
• 2006

In this paper, 3D objects is created from the real scene that is used by an active sensor, which gets depth and RGB information. To get the depth information, this paper uses the $Zcam^{TM}$ camera which has built-in an active sensor module. <중략> Thirdly, calibrate the detailed parameters and create 3D mesh model from the depth information, then connect the neighborhood points for the perfect 3D mesh model. Finally, the value of color image data is applied to the mesh model, then carries out mapping processing to create 3D object. Experimentally, it has shown that creating 3D objects using the data from the camera with active sensors is possible. Also, this method is easier and more useful than the using 3D range scanner.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.6
• /
• pp.109-116
• /
• 2005

Recently, images/videos have been preferred as the communication media because of their information-implication and easy recognizability. But the amount of their data is so large that it has been the major research area to compress their data. This paper is related to optimization in th image data format, which can make a great effect in performance of data compression and is based on the wavelet transform and JPEG2000. This paper established a criterion to decide the data format to be used in wavelet transform, which is on the bases of the data errors in frequency transform and quantization. This criterion has been used to extract the optimal data format experimentally. The result were(1, 9) of 10-bit fixed-point format for filter coefficients and (9, 7) of 16-bit fixed-point data dormat for wavelet coefficients and their optimality was confirmed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.3
• /
• pp.190-196
• /
• 2016

This paper proposes a humanoid robot performance system for performing in public places, such as an event, exhibition, or street performance. The system of modular structures can be moved easily, and can be played by a module or a combination of modules. The system developed with open source-based software and hardware is easy to adapt and improve. The robot performance control program for controlling robots, displays, audios, videos, and performance instruments was developed using the open source language, Processing. The performance instruments were developed using the open source hardware, Arduino. The contents of the robot performance were composed of scene-specific image, background audio, computer graphics, and videos. For their control and synchronization, the performance control program communicates with the humanoid robots and the performance instruments. In addition, performance accessories required to represent the performance concepts are produced by 3D modeling and printing. In a public place, the robot performance is performed with the theme of celebrating a Halloween day.

• Korean Journal of Remote Sensing
• /
• v.30 no.1
• /
• pp.13-24
• /
• 2014

Satellite remote sensing data have been valuable tool for volcanic ash monitoring. In this study, we present the results of application of satellite remote sensing data for monitoring of volcanic ash for three major volcanic eruption cases (2008 Chait$\acute{e}$n, 2010 Eyjafjallaj$\ddot{o}$kull, and 2011 Shinmoedake volcanoes). Volcanic ash detection products based on the Moderate Resolution Imaging Spectro-radiometer (MODIS) observation data using infrared brightness temperature difference technique were compared to the forward air mass trajectory analysis by the HYbrid Single-Particle Lagrangian Integrated Trajectory (HYSPLIT) model. There was good correlation between MODIS volcanic ash image and trajectory lines after the volcanic eruptions, which support the feasibility of using the integration of satellite observed and model derived data for volcanic ash forecasting.

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2004.11a
• /
• pp.115-118
• /
• 2004

Respiratory motion in the thorax and abdomen is an important limiting factor in high-precision radiation therapy. The lung tumor and tumor(pancreas, stomach) in abdomen therefore are internal motion due to breathing. We will perform to measurement of dose distributions for these moving tumors. In preliminary study, we investigated displacement of moving tumor such as liver, lung tumor in abdomen with previously reported papers. With reference data, internal movements of tumor are displayed with phantom and moving control device(MCD), which appear three dimension (3-D) motion such as x, y and z axis. These devices are used to access dose delivered in tumor with and without internal motion. The MCD and phantom were used to evaluate a delivered dose under similar condition, although there are not same internal tumor motion. In future, we will obtain the exact evaluation of dose if improved in programed software of moving control device and measure precise internal motion using image modality such as fluoroscopy, simulator in based on this study.

• Journal of Korea Multimedia Society
• /
• v.8 no.11
• /
• pp.1421-1431
• /
• 2005

There are two methods in 3-D sound reproduction: a surround system, like 3.1 channel method and a binaural system using 2-channel method. The binaural system utilizes the sound localization principle of a human using two ears. Generally, a crosstalk between each channel of 2-channel loudspeaker system should be canceled to produce a natural 3-D sound. To solve this problem, it is necessary to trace a head movement. In this paper, we propose a new algorithm to correctly trace the head movement of a listener. The Proposed algorithm is based on the detection of face and eye. The face detection uses the intensity of an image and the position of eyes is detected by a mathematical morphology. When the head of the listener moves, length of borderline between face area and eyes may change. We use this information to the tracking of head movement. A computer simulation results show That head movement is effectively estimated within +10 margin of error using the proposed algorithm.

• Journal of the Korea Computer Graphics Society
• /
• v.13 no.4
• /
• pp.21-27
• /
• 2007

The 3D Delaunay triangulation is the most widely used method for the mesh creation via the triangulation of a 3D point cloud. However, the method involves a heavy computational cost and, hence, in many interactive applications, it is not appropriate for surface triangulation. In this paper, we propose an efficient triangulation method to create a surface mesh from a 3D point cloud. We divide a set of object points into multiple subsets and apply the 2D Delaunay triangulation to each subset. A given 3D point cloud is cut into slices with respect to the OBB(Oriented Bounding Box) of the point set. The 2D Delaunay triangulation is applied to each subset producing a partial triangulation. The sum of the partial triangulations constitutes the global mesh. As a postprocessing process, we eliminate false edges introduced in the split steps of the triangulation and improve the results. The proposed method can be effectively applied to various image-based modeling applications.