• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.8
• /
• pp.798-803
• /
• 2007

In case of minimized digital camera and mobile digital camera, it's difficult to get the high quality image by conventional AE(Auto Exposure) algorithm because of restriction of system organization. In this paper, a new algorithm that adopts a target setting, a compensation of feedback delay and a gamma correction, etc, are suggested for improving a noise increase and an output sensitivity decrease due to system minimization. We also suggest a method using fuzzy logic which can decide more effectively the ES(Electric Shutter) value and the AGC(Analog Gain Control) value than conventional system.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.2
• /
• pp.67-73
• /
• 2010

We have developed a millimeter-wave passive imaging system with reflector for detection of concealed objects. We have designed a millimeter-wave sensor, control device for reflector control, and a lens for focusing of millimeter-wave signal at center frequency of 94GHz. DC signal from millimeter-wave sensor output is filtered by low pass filter and amplified by video amplifier, and then converted into digital signal by using ADC/DAQ. This signal is image processed by computer, and it is possible to obtain millimeter-wave passive image with resolution of $18{\times}64$ pixel using the fabricated system. It is shown that we can obtain the image of men and concealed object with the system.

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2002.09a
• /
• pp.432-435
• /
• 2002

We have developed and proposed the heavy ion CT system which consists of fluorescent screen and CCD camera equipped with image intensifier. In our system, we have measured the residual range of particles that passed a phantom and reconstructed the CT image for the distribution of relative stopping power by filtered back projection method with Shepp '||'&'||' Logan filter. The heavy ion $\^$12/C accelerated up to 400 MeV/u by HIMAC (Heavy Ion Medical Accelerator in Chiba) was used. Intensity of the beam output changes like macro pulse, the period being 3.3 sec and the width being 2 sec. The series of data was acquired in synchronizing with the pulse, leading to the improvement of S/N in the CT image. The fundamental performance was experimentally evaluated in the proposed system. The spatial resolution was estimated to be about 1 mm and the density resolution (electron density referred to water) to be about 0.01.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.5
• /
• pp.455-462
• /
• 2016

Output Characteristics of the spaceborn image sensor such as infrared(IR) sensor are varied according to time elapses and sensor repetition on/off operation. As a result, the quality of IR sensor image is decreased. Therefore, spaceborne image sensor require a periodic calibration using a black body system by correcting a non-uniformity of the sensor. In this paper, we proposed a MEMS-based black body system that can implement the high temperature uniformity at various standard temperatures ranging from low to high temperature and easily estimate the representative surface temperature. In addition, it has advantages lightweight, low-power and high accuracy. The feasibility of the proposed MEMS-based black body system was verified through the thermal analysis.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.20 no.4
• /
• pp.580-585
• /
• 2010

In this paper, The object Tracking System is designed by SOPC based Nios II embedded processor and C2H compiler. And this system using single PTZ camera can effectively control IPs in the platform of SOPC based Nios II Embedded Processor and creating IP by C2H(C-To-Hardware) compiler for image-in/output, image-processing and devices of communication that can supply various monitoring information to network or serial. Accordingly, Special quality and processing speed of object tracking using high-quality algorism in the system is improved by hardware/software programming methods.

• Journal of the Korea Society of Computer and Information
• /
• v.24 no.11
• /
• pp.71-78
• /
• 2019

Most 3D displays that are currently in the market adopt the binocular disparity method creating a different image for the left and right eye for a 3 dimensional effect. However, commercialized 3D image output devices lack in performance making it uncomfortable for the viewer and restrict the viewer to certain positions. In this paper, we propose a single-cell polarized lens type stereoscopic system which has a smaller viewing angle and reduced crosstalk, with improved light penetration compared to existing double-cell structures; and analyzed the single-cell polarized lens type stereoscopic system properties, and conducted an effect analysis of performance improvement compared to the dual-cell type. Results showed that the single-cell type had a 25% improved performance, and the 3D crosstalk index which is an important index for quality characteristics of stereoscopic systems, increased over about 37%, compared to the dual-cell type.

• Journal of the Korea Society of Computer and Information
• /
• v.23 no.8
• /
• pp.95-99
• /
• 2018

This research is related to GPS(global positioning system) enabled device navigation service and consists of two parts. The first is the logic that records the route guidance video and records GPS information in time, and the second is the logic that outputs the created video data based on real time GPS. The recording logic first determines the origin and destination, records the video from the origin to the destination and it adjusts the speed of the image in a specific area so that the user can see it easily. And insert ancillary information and advertisements that can help guide the route. In the output logic, we provide navigation services using the video and GPS data tables we created, and it receives user's GPS information in real time and corrects it based on the recent user location to reduce errors. This provides local guidance services to people who lack language skills like foreigners.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.499-499
• /
• 2008

High voltage transformer of Diagnostic X-ray system has been contributed to wiping out disease to get a good quality images from patients. High voltage transformer of diagnostic X-ray system has been usefully used for diagnostic purpose but if high voltage transformer performances are deteriorated, low quality image will be archived. In this case, operator has to exposure to get a more good quality images. In this case, unexpected radiation could be exposed to patient and it is very harmful to the patient. And I would like to design and make equipment to checkable high voltage transformer performance after that I wish to test and study what it is most influences in radiation output quality.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.18 no.2
• /
• pp.44-53
• /
• 1981

This paper deals with two quantization systems with a stochastic refernce and gives the unified statical properties of the two systems. The conditions are derived for the invariance of the output quantized signal with respect to the imput signal for the two systems and it is shown that they are same. The correlation function by a polarity method using stochastic reference signals is show to be a special case of the general properties derived here. We have also shown that the classical stochastic computing is derived from the general properties of the first system and that L.G. roberts has used a special characteristic of the general properties of the second system in his image processing.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.6
• /
• pp.2748-2760
• /
• 2018

This paper proposes an audio event classification method based on convolutional neural networks (CNNs). CNN has great advantages of distinguishing complex shapes of image. Proposed system uses the features of audio sound as an input image of CNN. Mel scale filter bank features are extracted from each frame, then the features are concatenated over 40 consecutive frames and as a result, the concatenated frames are regarded as an input image. The output layer of CNN generates probabilities of audio event (e.g. dogs bark, siren, forest). The event probabilities for all images in an audio segment are accumulated, then the audio event having the highest accumulated probability is determined to be the classification result. This proposed method classified thirty audio events with the accuracy of 81.5% for the UrbanSound8K, BBC Sound FX, DCASE2016, and FREESOUND dataset.