• Journal of Advanced Navigation Technology
• /
• v.15 no.1
• /
• pp.130-139
• /
• 2011

In this paper, vehicle tracking algorithm using hue transformation in HIS color model is proposed. the proposed algorithm is installed on the road of the two horizontal virtual data sampling lines. The difference images are detected between the frame and the frame, respectively and also detected in the vehicle by using the hue color distribution to determine identity and lane changes. To examine the effectiveness of proposed algorithm, identification and velocity measurement for driving vehicle are evaluated. this evaluated results is shown by hue data of vehicle passing of two virtual data sample lines, and the velocity measurement for driving vehicle is less than 0.4% comparing with existing vehicle speed meter system.

• Journal of IKEEE
• /
• v.6 no.1 s.10
• /
• pp.54-64
• /
• 2002

In this paper, we propose the algorithm for segmenting the moving speaker and tracking its movement in the video conference image. For real time processing, we simplify the algorithm which is processed in the order of the segmenting and the tracking step. In the segmenting step, the speaker object is segmented from the image by using both the motion information obtained from the difference method and the illuminance information of image. The reference mask image is created from segmented speaker object. In the tracking step, the moving speaker is tracked by using simple block matching algorithm of which computation time is reduced by discarding the blocks which are classified into the unuseful blocks. In the simulation, we can get the good result of segmenting and tracking the moving speaker by applying the proposed algorithm to several test images.

• Journal of the Korean Solar Energy Society
• /
• v.31 no.1
• /
• pp.31-36
• /
• 2011

CF(Circular Fresnel) POF(Plastic Optical Fiber) daylighting system is a beam daylighting system utilizing solar direct beam radiation. In this study, a CF POF daylighting system has been introduced, developed and applied to KIER test buildings. The CF POF daylighting system consists of three parts: light collector, light transmitter and light diffuser. The light collector includes a Circular Fresnel lens focusing solar direct illuminance by sun tracking. The light transmitter contains the POF cable which has light transmission loss of 4.5% per meter. The light diffuser has about 80% diffuser efficiency. This study aims to evaluate of POF daylighting system performance. At the results of a CFPOF system performance evaluation, the theoretical CFPOF system efficiency was 41.9% and the actual CFPOF system efficiency at the KIER test building was 37.5%. The difference was due partly to the connecting efficiency.

• Journal of the Optical Society of Korea
• /
• v.16 no.4
• /
• pp.449-456
• /
• 2012

For two well-known modulation methods, stepwise current modulation (SCM) and pulse width modulation (PWM), the effects of driving current modulation conditions on chromaticity were experimentally investigated in a white LED lighting system. For the experimental implementation of both SCM and PWM, a white LED lighting was fabricated using phosphor converted (PC) white light emitting diodes (LEDs) and a driving circuit module was developed. By using them, the variations of illuminance, color coordinates, and spectrum were evaluated under various forward current conditions. Through the analysis in color coordinates, yellow shift in SCM and blue shift in PWM were observed on chromaticity diagrams with increasing average driving current. In addition, in order to analyze color deviation quantitatively, color distance before and after current increase, and the correlated color temperature (CCT) were calculated. As a result, for the white LED lighting in both modulation conditions, the maximum difference in the calculated CCT was obtained close to 1000 K. It means that careful consideration is required to be taken in the design of illumination systems to avoid serious problems such industrial accidents.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.10
• /
• pp.55-62
• /
• 2014

In the intelligent video surveillance system, moving objects generally are detected by calculating difference between background and input image. However formation of reliable background is known to be still challenging task because it is hard to cope with the complicated background. In this paper we propose an adaptive background formation algorithm considering stationary object. At first, the initial background is formed by averaging the initial N frames. Object detection is performed by comparing the current input image and background. If the object is at a stop for a long time, we consider the object as stationary object and background is replaced with the stationary object. On the other hand, if the object is a moving object, the pixels in the object are not reflected for background modification. Because the proposed algorithm considers gradual illuminance change, slow moving object and stationary object, we can form background adaptively and robustly which has been shown by experimental results.

• Journal of Bio-Environment Control
• /
• v.15 no.2
• /
• pp.125-137
• /
• 2006

Pleurotus eryngii is one of the most promising mushrooms produced on the domestic farms. The quality as well as quantity of Eryngii is sensitively affected by micro climate factors such as temperature, relative humidity, $CO_2$ concentration, and light intensity. To safely produce high-quality Eryngii all the yew round, it is required that the environmental factors be carefully controlled by well designed structures equipped with various facilities and control systems. At the commercial mushroom cultivation houses of permanent frame type (A, B), this study was carried out to find out reasonable range of each environmental factor and yield together with economic and safe structures influencing on the optimal productivity of Eryngii. This experiment was conducted for about two-year ken Nov. 2003 to Dec. 2005 in cultivation house. Ambient temperature during the experiment period was not predominantly different from that of a normal year. The capacity of the hot water boiler and the piping systems were not enough. Because the capacity of electric heater and air circulation were not enough, air temperatures in cultivation house before improvement of system were maintained somewhat lower than setting temperature, and maximum air temperature difference between the upper and lower growth stage during a heating time period was about 5.1. But the air temperatures after system improvement were maintained within the limits range of setting temperature without happening stagnant of air. Air temperature distribution was generally distributed uniform. Relative humidity in cultivation house before , improvement was widely ranged about $44{\sim}100%$. But as the relative humidity after improvement was ranged approximately $80{\sim}100%$, it was maintained within the range of relative humidity recommended. And $CO_2$ concentration was maintained about $400{\sim}3,300mg{\cdot}L^{-1}$ range. The illuminance in cultivation house was widely distributed in accordance with position, and it was maintained lower than the recommended illuminance range $100{\sim}200lx$. The acidity of midium was some lower range than the recommend acidity range of pH $5.5{\sim}6.5$. The yield was relatively ununiform. In case of bottle capacity of 1,300cc, the mushroom of the lowest grade was less than 3%. The consumption electric energy was quite different according to the cultivation season. The electric energy consumed during heating season was much more than that of cooling season.

• Journal of Biosystems Engineering
• /
• v.24 no.2
• /
• pp.115-122
• /
• 1999

Because of their small mass, volume, solid state construction and long life, light-emitting diodes(LEDs) hold promises as a lighting source for intensive plant production system. Spectral characteristics and light intensity of LEDs were tested to investigate their feasibility as artificial lighting sources for growth and morphogenesis control in transplant production system. Blue, green, and red LEDs had a peak-emission wavelength at 442nm, 522nm, and 673nm, respectively. Their half width defined as the difference between upper and lower wavelength in the intensity equivalent to 50% of the maximum intensity showed 26nm, 41nm, and 74nm, respectively. Photosynthetic photon flux(PPE) at the distance of 9cm under the LEDs array was measured as $235{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ for red, $109{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ for green, and $75{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ for blue LEDs. At the same distance, green LEDs had the illuminance of 13,0001x, nine to ten times higher than those of red and blue LEDs. Red, green, and blue LEDs at a distance of 9cm had the irradiance of $46W{\cdot}m^{-2},\;19W{\cdot}m^{-2},\;8W{\cdot}m^{-2}$, respectively. Light intensity of blue, green, and red LEDs increased linearly in proportion to the magnitude of the current applied to the operating circuit. Thus the light intensity of LEDs was controlled by the applied current in operating circuit.

• Korean Institute of Interior Design Journal
• /
• v.22 no.1
• /
• pp.47-54
• /
• 2013

For the office work environmental design, the importance of the design management is increased to improve operation efficiency as well as the aesthetic environmental implementation of the function today. Lighting is a required element ineffective operation environment. It has become more important for the aesthetic, economic, and practical reasons, to consider the luminous environment and the lighting of visual tasks separately. When the brightness is insufficient, productivity deteriorates, and the layout of the lighting located by mistake causes the fatigue of eyes. Productivity rises to office in a large number of studies so as satisfaction is low in general in the dark office, and to be bright. Therefore the purpose of this research is to suggest the right direction of lighting design of office building area. 11newly renovated office buildings are selected for this luminous environment research. We could conclusions as following through this research. First, it was planned brighter than the recommended lighting level in the most space. It shows that the accurate lighting design criteria is needed in order to achieve proper lighting environment. Second, the application of the LED lighting fixtures is continuously increased in the recent office lighting environment. It is explained that it is applied for reasons of the electrical energy reduction and the maintenance efficiency with the long life time. Third, the consideration of the lighting plan for the difference of working types is not enough. with various communication configuration through an independent plan, and the effective lighting plan that appropriateness preparation design and energy saving area vailable must be applied. Fourth, the lighting environment of the lobby needs a specialized lighting plan as are presentative space of the building.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.29 no.4
• /
• pp.44-52
• /
• 2001

This study performed factor analysis for 21 independent variables related to the effect of illumination and suggested the effect by multiple regression analysis on the relationship between the effect of illumination and the satisfaction of use of a dependent variable to find the effect of illumination in urban parks at night and the effect of illumination on the satisfaction of use. The results of this study are as follows; 1) Of the 21 independent variables used to study the effect of illumination in urban parks at night, the impact on safety and possibility of crime was highly. The effects of illumination by factor analysis were abstracted as effects of removing anxiety, securing safety, increasing use. 2) As a result of multiple regression analysis, independent variables influencing satisfaction of use in urban park were proved as effects of removing anxiety, securing safety, increasing identity, preparing atmosphere and increasing use. Also, the effect of securing safety was the most important factor; it showed a level of importance 2 times higher than the effect of removing anxiety, and 7.7 times higher than the effect of preparing atmosphere in relative contribution of the effect of illumination to satisfaction of use. 3) Of the effects of illumination influencing satisfaction of use in urban parks, the effect of securing safety and the effect of increasing visibility were more significant than the effects of removing anxiety, preparing atmosphere and increasing use. This fact means that personal safety an the identity of persons or facilities in the space of use should be considered with priority in planning or designing illumination. Also, it implies hat, for night use in urban parks, lightness of the space is required for general safety of use at parks, and proper illuminance on the activity in the space of use should be required. The subject parks of this study are 8 urban neighborhood parks. The model on the effect of illumination and the satisfaction of use depends on characteristics and conditions of location of he park and user class, so the subject parks and persons should be varied, and the difference by sex or ages should be suggested.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.8
• /
• pp.350-354
• /
• 2017

In this study, the DIAlux program was simulated for the optimal conditions of daylight and artificial light sources(LED) in a glass greenhouse. From the results of the daylight simulation, the optimal design conditions for the glass greenhouse were established, which had a $90^{\circ}$ installation angle and a higher transmittance of glass. In the case of growing lettuce in a glass greenhouse, it was compared with artificial light sources, the artificial light source (LED) was used to produce a power consumption effect of 41%. These results suggest that lettuce be grown in an energy saving glass greenhouse.