• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.5
• /
• pp.397-400
• /
• 2013

Off-axis magnetron sputtering was used for the crystallized ITO thin films deposition at various temperatures from 25 to $120^{\circ}C$. The ITO thin films were crystallized at $50^{\circ}C$ for Si (001) substrates and at $75^{\circ}C$ for PET substrate. The ITO thin films grown onto PET substrate at $120^{\circ}C$ were crystallized with a (222) preferred orientation. The 160-nm thick ITO films showed a resistivity of about $7{\times}10^{-4}{\Omega}{\cdot}cm$ and a transmittance of about 84% at a wavelength of 550 nm. Off-axis sputtering can be applied for low temperature crystallization of the ITO films.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.404-405
• /
• 2007

Tin-doped indium thin film is outstanding material among transparent Conductive Oxide (TCO) materials. ITO thin films show a low electrical resistance(<$10^{-4}\;[{\Omega}{\cdot}m]$) and high transmittance(>80%) in the visible range. ITO thin films usually have been deposited on the glass substrate. In order to apply flexible display, the substrate should have the ability to bend and be deposited without substrate heat. Also properties of ITO thin film depend on what kind of substrate. In this study, we prepared ITO thin film on the polycarbonate (PC) substrate by using Facing Target Sputtering (FTS) system. Before deposition of ITO thin film, PC substrate took plasma surface treatment. The electrical and surface properties of as-deposited thin films were investigated by Hall Effect measurement, UV/VIS spectrometer and the surface property of substrate is investigated by Contact angle measurement.

• Journal of IKEEE
• /
• v.20 no.4
• /
• pp.392-397
• /
• 2016

In this paper, Characteristics of the ITO thin film deposited were analyzed using DC magnetron sputtering in order to investigate the deposition conditions of ITO thin film for transparent electrode. The experiment conditions were atmospheric pressure from 1 to 3[mTorr] with 1 [mTorr] step, bias electric voltage ranged from 260[V] to 330[V] with 10[V] step. The transmittance, refractive index and surface and cross-sectional shape of the deposited thin film were measured with an UV.-VIS. spectrophotometer, ellipsometer and SEM. Such condition as 1~2[mTorr] and near 300[V] voltage the transmittance was over 90[%] and the refractive index more than 2. Therefore, it was confirmed that the appropriate condition for making a highly transparent conductive electrode.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.4
• /
• pp.935-938
• /
• 2010

Indium-tin-oxide (ITO) films show a low electrical resistance and high transmittance in the visible range of an optical spectrum. The transparent electrodes have to get resistivity and sheet resistance less than $1{\times}10^{-3}{\Omega}/cm$ and $10^3{\Omega}/sq$ respectively and transmittance over 80% at wavelength of 380nm~780nm. This study establishes DC magnetron sputtering process condition on ITO thin film by measuring electrical and optical properties of the thin film. As results, we obtained $300\;{\mu}{\Omega}cm$ resistivity of ITO films with good transmittance (above 90 %) under 90:10 wt% composition rate of $In_2O_3:SnO_2$. Also, we understood that the ITO thin film by DC magnetron sputtering depends on the deposition condition, especially substrate temperature, and the composition rate of $In_2O_3:SnO_2$ that is one of the most critical parameters was successfully optimized for high qualified transparent electrodes.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2006.10a
• /
• pp.51-55
• /
• 2006

ITO/Ag/AZO and AZ0/Ag/ITO multi-layer films deposited on glass substrate by RF magnetron sputtering have a much better electrical properties than ITO and AZO single-layer films. The multi-layer structure was consisted of three layers of ITO, Ag and AZO. The optimum working pressure of AZO layers deposition was determined to be $1.0{\times}10^{-2}$ torr for high optical transmittance and good electrical conductivity. The electrical and optical properties of sub/IT0/Ag/AZO were higher than those of sub/AZ0/Ag/ITO multi-layer films.

• Journal of the Korean institute of surface engineering
• /
• v.37 no.3
• /
• pp.158-163
• /
• 2004

ITO thin film was deposited on the glass by RF magnetron sputtering. Dependance of the process parameters such as thickness, target-to-substrate distance, substrate temperature and oxygen partial pressure on the transmittance and electrical resistance of ITO film were investigated. The deposition conditions for getting better optical and electrical ITO characteristics were the 1800-$2300\AA$ thickness, 65mm substrate-to-target distance, $350^{\circ}C$ substrate temperature and 8% oxygen partial pressure. At these conditions, the transmittance and sheet resistance of the ITO film were 83.3% and 77.86Ω/$\square$, respectively.

• Proceedings of the KIEE Conference
• /
• 2005.07c
• /
• pp.1856-1858
• /
• 2005

In this study, Indium Tin Oxide(ITO) thin films were prepared at $O_2$ gas 0.2 sccm, no heating to substrate and working pressure 1mTorr with varying deposition time. We estimated structural, optical, electrical characteristics of ITO thin films as function of ITO thin films thickness. As a result, XRD peaks increased with increasing the thickness. The ITO thin film was fabricated with resistivity $4.23{\times}10^{-4}[{\Omega}{\cdot}cm]$, carrier mobility $52.9[cm^2/V{\cdot}sec]$, carrier concentration $2.79{\times}10^{20}[cm^{-3}]$. And we also observed that the SEM images of ITO thin films surface.

• Journal of Korean Vacuum Science & Technology
• /
• v.6 no.1
• /
• pp.51-54
• /
• 2002

Polymer EL devices of glass/ITO/PI/MEH-PPV/Al structure were fabricated using spin coating and the Ionized Cluster Beam deposition technique. PMDA-ODA type thin polyimide films which can be used as a impurity blocking layer of EL device were deposited by ICB. According to our previous results, the packing densities of polyimide films were subject to change and depend on their deposition condition. By inserting a Pl layer with various thickness and packing density, I-V characteristics and life time of the devices were investigated to determine the role of a interlayer. The blocking of impurity diffusion from ITO to luminescent layer were confirmed by XPS.

• Transactions on Electrical and Electronic Materials
• /
• v.3 no.2
• /
• pp.6-9
• /
• 2002

Indium tin oxide (ITO) films were deposited on unheated PET substrates by DC reactive magnetron sputtering of In-Sn (90-10 wt%) metallic alloy target. Electrical and optical properties of as-deposited films were systematically studied by control of the deposition parameters such as working pressure, DC power, and oxygen partial pressure. The figures of merit are important factors that summarize briefly the relationship between electrical and optical properties of transparent conducting films. The formulae of T/R$\_$sh/ and T$\^$10// R$\_$sh/ are expressed as a function of transmittance and sheet resistance. The best values of those figures of merit were approximately 38.6 and 8.95 ($\times$10$\^$-3/Ω$\^$-1/), respectively.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.23 no.4
• /
• pp.498-505
• /
• 1986

In2O3: Sn(ITO) transparent conducting films were fabricated by the electron beam evaporation method. The dependence of their electrical and optical properties on deposition conditions were examined. The optimum evaporation conditions were such that the deposition rate was 5-10\ulcornersec, oxygen partial pressure was 4x10**_4 torr, substate temperatudre was above 300\ulcorner, and SnO2 doping rate was 10 mol%. The values of sheet resistance and transmittance of the films in visible region fabricated under these optimum conditins were 12\ulcorner/ and 87-99%, respecively. And the energy conversion efficiency of the SIS solar cell fabricated using ITO was 9.16%. It is shown that the transparent conducting films can be applied to the TV camear pick-up tube and solar cell.