• Journal of the Korean Vacuum Society
• /
• v.21 no.6
• /
• pp.333-341
• /
• 2012

Indium Tin Oxide (ITO) thin films were prepared by RF magnetron sputtering with different flow rates of $O_2$ gas from 0 to 12 sccm. Electrical and optical properties of these films were characterized and analyzed. ITO deposited on soda lime glass and RF power was 2 kW, frequency was 13.56 MHz, and working pressure was $1.0{\times}10^{-3}$ Torr, Ar gas was fixed at 1,000 sccm. The transmittance was measured at 300~1,100 nm ranges by using Photovoltaic analysis system. Electrical properties were measured by Hall measurement system. ITO thin films surface were measured by Scanning electron microscope. Atomic force microscope surface roughness scan for ITO thin films. ITO thin films secondary electron emission coefficient(${\gamma}$) was measured by ${\gamma}$-Focused ion beam. The resistivity is about $2.4{\times}10^{-4}{\Omega}{\cdot}cm$ and the weighted average transmittance is about 84.93% at 3 sccm oxygen flow rate. Also, we investigated Work-function of ITO thin films by using Auger neutralization mechanism according to secondary electron emission coefficient(${\gamma}$) values. We confirmed secondary electron emission peak at 3 sccm oxygen flow rate.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.176.1-176.1
• /
• 2013

TCO (Transparent Conductive Oxide)는 투명 전도성 산화물 높은 투과율과 낮은 비저항 가지고 있어서 최근 사용된 평판디스플레이 LCD(liquid crystal display), PDP (Plasma Display Panel), OLED (Organic Light Emitting Display) 에 많이 사용되고 있다. 현재 양산화 되고 있는 ITO (Indium tin Oxide)는 좋은 전도율과 높은 투과율로서 가장 많이 쓰인다. 하지만 ITO중에 Indium Oxide는 치명적인 독성을 가지고 있으며 In의 저장량이 적어 시간이 갈수록 가격이 비싸지는 등 여러 가지 단점을 가지고 있다. 그것에 비해 AZO (aluminum-doped zinc oxide)는 독성이 없고 가격도 저렴하여 ITO의 단점을 보완 할 수 있는 물질이다. AZO 증착은 현재 sol-gel, CVD(chemical vapor deposition), Sputter, 등으로 사용되고 있으며 현재 많은 연구가 진행되고 있다. 본 실험에서는 PEN 기판을 사용하였으며, 플라즈마의 열적 데미지로 인한 기판의 변형 등 여러 가지 문제를 해결하기 위하여 박막의 열적 변형이 적고, 고밀도 플라즈마로 양질의 박막 증착이 가능한 FTS (Facing Target Sputtering)방법을 사용하여 AZO박막을 증착시키고 구조적, 전기적, 광학적인 특성을 평가 하였다. 측정 분석 결과 AZO는 가시광 영역에 높은 투과율이 요구되는 Flexible display 표시장치와 OLED, PDP, 유기태양전지 등 많은 영역에 사용이 가능 할 것이라 사료된다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.206-206
• /
• 2011

투명 전도성 산화물 (TCO, Transparent Conductive Oxide) 박막을 태양전지에 적용하기 위해서는 우수한 전기 전도성 및 가시광 영역에서 높은 투과율을 가져야 한다. 대표적인 TCO 물질인 ITO (Indium tin oxide) 박막은 우수한 전기적, 광학적 특성을 가지고 있지만 $400^{\circ}C$ 이상의 고온에서는 전기저항이 급격히 증가하게 되어 실제 태양전지 패널에 적용했을 때 전기적 특성이 저하된다. 따라서 태양전지용 TCO 박막을 개발 시, 뛰어난 고온 안정성이 요구되고 있다. 본 연구에서는 고온 안정적 특성을 지니는 Ga3+를 도핑한 ZnO 계열 TCO인 GZO/ITO multi-layered 박막을 증착하였다. 또한 buffer layer의 두께 변화 및 구조 제어를 통한 최위층 박막의 전기적 특성 및 결정성을 조사하였으며 다층 박막의 계면 간 특성 및 굴절률 제어를 통한 광학적 물성을 연구하였다.

• Proceedings of the Korean Ceranic Society Conference
• /
• 2003.04a
• /
• pp.179.1-179
• /
• 2003

• Proceedings of the Korean Vacuum Society Conference
• /
• 2004.08a
• /
• pp.267-267
• /
• 2004

• Proceedings of the Korean Vacuum Society Conference
• /
• 2002.06a
• /
• pp.71-71
• /
• 2002

• Proceedings of the Korean Vacuum Society Conference
• /
• 2006.08a
• /
• pp.123-123
• /
• 2006

• Journal of the Korean institute of surface engineering
• /
• v.32 no.6
• /
• pp.671-676
• /
• 1999

ITO (indium tin oxide) thin films on PET (polyethylene terephthalate) substrate have been deposited by a dc reactive magnetron sputtering without heat treatments such as substrate heater and post heat treatment. Each sputtering parameter during the sputtering deposition is an important factor for the high quality of ITO thin films deposited on polymeric substrate. Particularly, the material, electrical and optical properties of as-deposited ITO oxide films are dominated by the ratio of oxygen partial pressure. As the experimental results, the excellent ITO films are prepared on PET substrate at the operating conditions as follows : operating pressure of 5 mTorr, target-substrate distance of 45mm, do power of 20~30W, and oxygen gas ratio of 10%. The optical transmittance is above 80% at 550 nm, and the sheet resistance and resistivity of films are 24 Ω/square and $1.5\times$10$^{-3}$ Ωcm, respectively.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.6
• /
• pp.552-557
• /
• 2006

Electrical, optical, surface, and structural properties of amorphous indium-zinc-oxide (a-IZO) grown by box cathode sputtering (BCS) were compared with crystalline indium-tin-oxide (c-ITO) anode films grown by conventional DC sputtering (DCS). Although x-ray diffraction plot of BCS-grown IZO film shows amorphous structure, the optical and electrical properties of a-IZO is comparable to those of c-ITO film. In particular, BCS-grown IZO films shows very smooth surface without defects such as pin hole and cracks because most of the energy of the sputtered atoms was confined in high density plasma region in box cathode gun. Furthermore polymer organic light emitting diodes (POLED) with the a-IZO anode film shows better electrical properties than that of POLED with the c-ITO anode film due to high work function and smooth surface of a-IZO. This suggested that BCS-grown a-IZO film is promising anode materials substituting conventional c-ITO anode in OLED and flexible displays.

• Transactions on Electrical and Electronic Materials
• /
• v.1 no.2
• /
• pp.23-27
• /
• 2000

Indium in oxide(ITO) films have been deposited on PET and glass substrates by DC reactive magnetron sputtering without post-deposition thermal treatment, The high quality for microstructure, electrical and optical properties of the as-deposited ITO films on unheated substrates is dominated by the sputtering parameters, The influence of the working gas pressure, DC power and oxygen partial pressure has been systematically investigated, The lowest DC power, and oxygen partial pressure has been systematically investigated, The lowest resistivity of ITO films deposited on PET substrates was 6$\times$10$^{-4}$ $\Omega$cm. It has been obtained at a working pressure of 3 mTorr and DC power of 30 W. The sheet resistance and optical transmittance of these film were 22 $\Omega$/square and 84% respectively. The best values of figures of merit for the electrical and optical characteristics such as T/ $R_{sh}$ and $T^{10}$ / $R_{sh}$ are approximately 38.1 and 7.95($\times$10$^{-3}$ $\Omega$$^{-1}$ ), respectively.