• 한국CDE학회논문집
• /
• 제8권2호
• /
• pp.101-108
• /
• 2003

Presented in this paper is the development of an product cost estimation system at the product design stage. The efficient cost estimation function at the design stage is essential for the cost reduction activities through the entire product life cycle. For this purpose, it is necessary to establish a systematic working procedure, and to develop information system for managing a great deal of production and product-related data required for the cost estimation. The developed system has the capability of estimating a cost of assembly type products as well as unit-item type products. As proposed system is based on the variant approach, it can be used easily at an early design stage without the need for detail design information. Also, this system is integrated with legacy PDM (Product Data Management) and ERP (Enterprise Resource Planning) system for fast. accurate and easy product cost estimation. The estimated cost includes material cost, overhead cost as well as labor cost.

• 대한인간공학회지
• /
• 제26권4호
• /
• pp.113-120
• /
• 2007

Kimchi refrigerator is a specific refrigerator for Kimchi, Korean traditional fermented food. It has been fast popularized since it was developed about ten years ago. In this study, a survey was conducted with 103 female voluntary respondents to understand the customer satisfaction of the Kimchi refrigerator in the aspect of physical use. The respondents showed a high satisfaction for the use of refrigerators. It was, however, shown that they felt highly uncomfortable in using the refrigerator. In particular, the high discomfort was related to the fact that the customer should bend her torso very much to put Kimchi containers into the refrigerator, take them out of it, or clean its inside. Seventy-five percent of the respondents reported the experience of body-part pains and 58.4% of them reported pain experience in the back. It is presumed that these results are highly correlated to the top-cover design of the refrigerator, which is the most popular type to improve its performance of maintaining proper temperature. Therefore, the developers should consider these usability problems related to the refrigerator and try to enhance its usability by adopting ergonomics in the design stage.

• 한국재난정보학회 논문집
• /
• 제18권4호
• /
• pp.891-898
• /
• 2022

연구목적: 건설산업의 전 분야 및 전 단계에 대한 BIM 도입 의무화가 머지않아 시행될 만큼 BIM 업무의 실질적인 생산성 향상을 위한 기술 확보 방안이 필요하기 때문에 연구에서는 엔지니어가 BIM기반 설계 과정에서 건설기준을 검증할 수 있도록 BIM 모델링 절차별로 제작되는 주요 객체에 대해 자동으로 관련 건설기준을 검증할 수 있는 방안을 제시하였다. 연구방법: BIM기반 도로 설계 업무를 대상으로 모델링 업무 절차를 정의하고, 각 단계에서 도출되는 BIM 모델별로 관련 설계기준을 데이터베이스로 구축하는 방안을 마련하였다. 그리고 BIM기반 설계기준 검토 자동화 시스템 개발을 위한 프로세스도 제시하였다. 연구결과: Civil3D 및 Dynamo를 활용하여 BIM기반 설계기준 검토 자동화 모듈을 개발하고, 시범적용을 통해 설계과정에서 제작되는 BIM 객체의 건설설계기준 충족여부를 자동으로 신속하게 제공할 수 있음을 확인하였다. 결론: BIM기반 설계기준 검토 자동화 기술은 BIM 모델 제작 업무의 생산성 향상과 BIM 모델의 품질확보가 가능하다.

• 한국건설관리학회논문집
• /
• 제13권5호
• /
• pp.12-24
• /
• 2012

턴키계약방식(Design Build)은 설계시공 일괄계약방식으로 책임 한계가 보다 광범위하게 적용되어 프로젝트 수행 초기 설계 단계부터 설계비 부담 증가 등 일반 분리발주공사 보다 리스크 발생율이 높은 실정이다. 따라서 이번 연구에서는 턴키계약프로젝트에서 리스크요인의 분석 및 정량적 평가 방안을 연구하였다. 이 번 연구는 프로젝트참여자로부터 수집한 설문조사자료를 이용하여 통계분석을 수행한 결과 총145개의 리스크변수중 전체 참여자 그룹이 동의하는 DB프로젝트에서의 리스크변수는 25개로 나타났다. 요인분석을 통하여 이를 8가지 리스크요인으로 함축할 수 있었으며 이중 3가지 요인인 건설현장관련, 계약관련 및 설계관련 리스크요인이 72%의 가중치를 나타내었다. 리스크변수 및 리스크요인에 따른 가중치와 결합확률을 이용하여 리스크요인에 기인한 추정손실의 크기를 전체공사비에 대한 백분율로 추정한 결과 약 6%로 나타났고, 리스크 요인상호영향을 고려하면 약 10%를 나타나 리스크대응을 위하여 전체공사비의 약 6%~10%의 예비비를 계상할 필요가 있는 것으로 나타났다.

• 한국해양공학회지
• /
• 제36권2호
• /
• pp.125-131
• /
• 2022

Structural design for shipbuilding is generally divided into three stages: the basic, detailed, and production designs, of which the production design is the most frequently revised among the three design stages. The revision involved in production design department was approximately 61% of the total 4,211 revision members and approximately 56% of the total 710 revision cases in the survey on the number of design revisions for nine ships. In this study, members and drawings with a high revision rate were investigated, and related design departments were identified. In addition, the work contents of the design department were analyzed to reduce the number of design revisions and three tasks are very frequently revised were selected. A survey was conducted with engineers engaged in the production design, after which, standards were proposed for the method of aggregating bills of materials, to employ macros to calculate the length of members and that of profile input data when reviewing drawings. Via the study, it was determined that the major causes of design revision are simple mistakes by engineers or lack of understanding on structural arrangement of basic members more than intricacies of prior design and high level specification. As a result of applying the proposed standards, it was confirmed that the design revision was reduced by approximately 40%.

• 한국정보통신학회논문지
• /
• 제7권5호
• /
• pp.986-992
• /
• 2003

In this paper we challenge the user Authentication using Kerberos V5 authentication protocol in WPKI environment. this paper is the security structure that defined in a WAP forum and security and watches all kinds of password related technology related to the existing authentication system. It looks up weakness point on security with a p개blem on the design that uses wireless public key-based structur and transmission hierarchical security back of a WAP forum, and a server-client holds for user authentication of an application level all and all, and it provides one counterproposal. Therefore, We offer authentication way solution that connected X.509 V3 with using WIM for complement an authentication protocol Kerberos V5 and its disadvantages.

• 항공우주시스템공학회지
• /
• 제2권2호
• /
• pp.46-50
• /
• 2008

Aerodynamic characteristics, such as drag and lift, play an important role in automobile design under certain speed conditions. Such characteristics are essential to design an automobile since they are directly related to automobile's performance such as passenger safety and fuel consumption. There is a huge demand for the automobile to have safe performance at high speed. Reduction in drag is also important and it could lead to the solution of air flow induced noise and dust problems. The objective of this research is to find out the aerodynamic differences between conventional side mirror and a modified one using CFD. Although drag generated around a side mirror is only about 7% of the total drag when a car runs, it is very closely related to driver's field of vision and noise generation. CFD simulation of the flowfield around a car side-view mirror was performed using a commercial code; Gambit and FLUENT.

• 한국정밀공학회지
• /
• 제18권8호
• /
• pp.164-173
• /
• 2001

The configuration of injection molded part can be classified into primary feature and supplementary feature. Even though supplementary features such as ribs, snap fits and bosses make mold more complicated, which cause the increasement of the mold cost, supplementary features should be attached to primary features because of assembly, reinforcement, moldability and other functional purposes. But it is not easy for novice designers to design them appropriately because of the profound knowledge related to Injection molding. In this paper, the intelligent design tool called ISFD(Intelligent Supplementary Feature Designer) which supplies easy, simple, time and cost-effective design method has been studied and developed. A knowledge-based design system is a new tool which enables the concurrent design and CIM with integrated and balanced design decisions at the initial design stage of injection molding.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2002년도 학술대회지
• /
• pp.248-251
• /
• 2002

국내 건설엔지니어링 업체가 새로운 사업모델을 개발하기 위해서는 엔지니어링 설계분야에 대한 확고한 기반 구축이 필요하며, 이는 설계협력사와의 협력관계 조성을 통해 가능하다. 이에 본 연구는 문헌 및 면담조사를 실시하여 설계협력사와의 협력관계 실태를 파악한 후, 건설엔지니어링 업체와 설계협력사간의 전략적 제휴방안을 제안하였다. 설계협력사와의 전략적 제휴는 경영${\cdot}$재무, 인력${\cdot}$기술, 관리제도 분야별로 시행단계, 발전단계, 전략적 제휴단계를 거쳐 이루어지도록 하였다.

• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 1998년도 추계학술대회 및 정기총회
• /
• pp.204-208
• /
• 1998

The fundamental issues to evaluate machine tool's performance through simulation pertain to the physical models of the machine tool itself and of process while the practical problems are related to the development of the modular software structure. It allows the composition of arbitrary machine/process models along with the development of programs to evaluate each state of machining process. Surface roughness is one of the fundamental factors to evaluate machining process and performance of machine tool, but it is not easy to evaluate surface roughness due to its tribological complexity. This paper presents an algorithm to calculate surface roughness considering cutting geometry, cutting parameters, and contact dynamics of cutting between tool and workpiece as well as tool wear in turning process. The designed virtual machining system can be used to evaluate the surface integrity of a turned surface during the design and process planning phase for the design for manufacturability analysis of the concurrent engineering.