• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.3 no.2
• /
• pp.77-84
• /
• 2005

A voloxidizer for a hot cell demonstration, that handles spent fuels of a high radiation level in a limited space should be small and spent fuel powders should not be dispersed out of the equipment involved. In this study a density rate equation as well as the Stokes'equation has been proposed in order to obtain the theoretical terminal velocity of powders. The terminal velocity of U$_{3}$O$_{8}$ has been predicted by using the terminal velocity of SiO$_{2}$, and then determination has been the optimum air flow rate which is able to prevent powders from scattering. An equation which has shown a relationship between theoretical terminal velocities of U$_{3}$O$_{8}$ and SiO$_{2}$ has been derived with the help of the Stokes'equation, and then an experimental verification made for the theoretical Stokes' equation of SiO$_{2}$ by means of an experimental device made of acryl. The theoretical terminal velocity based on the proposed density rate equation has been verified by detecting U$_{3}$O$_{8}$ powders in a filter installed in the mock-up voloxidizer. As the results, the optimum air flow rates seem to be 20 LPM by the Stokes'equation while they are 14.5 L/min by the density rate equation. At the experiments with the mock-up voloxidizer, a trace amount of U$_{3}$O$_{8}$ seems to be detectable at the air flow rate of 14.5 L/min by the density rate equation, but U$_{3}$O$_{8}$ powders of 7$\mu$m diameter seem detectable at the air flow rate of 20 L/min by the Stokes'equation. It is revealed that 14.5 L/min is the optimum air flowe rate which is capable of preventing U$_{3}$O$_{8}$ powders from scattering in the UO$_{2}$ voloxidizer and the proposed density rate equation is proper to calculate the terminal velocity of U$_{3}$O$_{8}$ powders.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.5 no.3
• /
• pp.171-177
• /
• 2007

This study suggested a new method to stabilize molten salt wastes generated from the pyre-process for the spent fuel treatment. Using conventional sol-gel process, $SiO_2-Al_2O_3-P_2O_5$ (SAP) inorganic material that is reactive to metal chlorides were prepared. In this paper, the reactivity of SAP with the metal chlorides at $650{\sim}850$, the thermal stability of reaction products and their leach-resistance under the PCT-A test method were investigated. Alkali metal chlorides were converted into metal aluminosilicate($LixAlxSi1-_xO_{2-x}$) and metal phosphate($Li_3PO_4\;and\;Cs_2AlP_3O_{10}$) While alkali earth and rare earth chlorides were changed into only metal phosphates ($Sr_5(PO_4)_3Cl\;and\;CePO_4$). The conversion rate was about $96{\sim}99%$ at a salt waste/SAP weight ratio of 0.5 and a weight loss up to $1100^{\circ}C$ measured by thermogravimetric analysis were below 1wt%. The leach rates of Cs and Sr under the PCT-A test condition were about $10^{-2}g/m^2\;day\;and\;10^{-4}g/m^2\;day$. From these results, it could be concluded that SAP can be considered as an effective stabilizer for metal chlorides and the method using SAP will give a chance to reduce the volume of salt wasteform for the final disposal through further researches.

• Journal of Animal Science and Technology
• /
• v.50 no.1
• /
• pp.33-44
• /
• 2008

The purpose of this study was to estimate the genetic parameters and trend of Landrace and Yorkshire pigs, which were raised on private farms from 1999 to 2005 and tested for their reproductive performance by the Korea Animal Improvement Association. Prior to analysis, records without pedigree or having value with larger than±3×standard deviation for the Total number of born were excluded. The effects of breed and environmental factors were estimated with least square method(Harvey, 1979), and estimation of breeding values and genetic parameters were performed on the data of 1’st litter only with GIBBSF90(Misztal, 2001) which was programmed according to Gibbs Sampling method based on Bayesian Inference by Gianola and Fernando(1986), Jensen(1994) and others. Gibbs sampling was performed 50,000 times for each parameter, and the first 5000 samples were regarded as those in burn-in period and thus, excluded for post hoc analysis. Total number of born and total number of accident were statistically significant(p<0.01) for the breed, farrowing year, farrowing season and parity effects, and the number born alive at birth was statistically significantp<(0.01) for the breed, farrowing year, farrowing season and parity effects. No particular trend was observed in the genetic and phenotypic improvement of the total number of born and number born alive at birth before 2001, when the piglet registration system started, but the tendencies of increasing for the total number of born and number born alive and decreasing for the total number of accident were observed since 2001. Somewhat higher heritability estimates of our study seems to be attributed to the situations that first parity records with poor farrowing performances were used in the analyses and it was impossible to obtain accurate reproductive performance due to the absence of criteria for record keeping at the level of individual farms.

• Journal of Animal Science and Technology
• /
• v.55 no.5
• /
• pp.343-349
• /
• 2013

Data including 1,372,050 milk records pertaining to 438,019 cows from 1983 to 2011 collected during performance tests conducted by the National Livestock Cooperative Dairy Improvement Center were used to calculate milk income and profit of individuals and investigate the effects of production levels of early lactation (parity 1 and 2, respectively). Individuals with a moderate level of early lactation stayed longer in herds. Among parity 1, the 9,000 kg or higher group had a lower mean number of lactations than the overall mean of 3.13. The 7,000 kg or lower and 10,000 kg or higher groups had lower mean life time milking days than the overall mean of 1,076.8 days. Standard deviations of lifetime traits tended to decrease as production levels increased. For parity 2, the 11,000 kg or higher group had a lower mean number of lactation than the overall mean of 3.43. The lifetime milking days was highest in the 12,000 kg group (1,212.0 days), and generally smaller in the lower groups. Profit increased as the production level of groups increased for both parity 1 and 2. In groups with low production levels, profit of parity 1 was higher than that of parity 2, while the reverse was true in groups with high production levels. These results suggest that individuals in the low production groups had a greater likelihood to be culled due to reproductive or other problems. Furthermore, the accuracy of the prediction of lifetime profit of individuals with a milk yield of 305 days seems to be higher for parity 2 than parity 1; therefore, it is desirable to predict lifetime profit using the 305d milk yield of parity 2. In conclusion, breeding goals are based on many factors in functions for the estimation of profit; however, production levels during early lactation (parity 1 and 2) can be used as indicators of profit to extend profitability.

• Archives of design research
• /
• v.18 no.2 s.60
• /
• pp.243-254
• /
• 2005

Great Britain and the United States and Finland are having an interest in long policy subject about child design education through early design education. And they approaches and practices it systematically. The research about the design learning program instance of advanced nation of primary school's design education for various objective is necessary for use with the fundamental reference data for an elementary design education. And so, This research presented the program instance investigation and analysis result of British primary school's design education. U.K is teaching an primary design education from two subjects of Art & Design and Design and Technology which is a legal subject with national curriculum. The analysis result of design relation unit learning program of two subjects is: Design relation unit learning programs of 'Design and Technology' subject's 20 unit which except 4 food relation unit is largely scientific engineering contents that include utility function contents in part. The reason is as behavior styles based on Design process solve problems scientifically & rationally. Design relation 6 units in subject of Art & Design which except the units which relates with the pure fine arts and architecture in 19 units is aesthetic-symbolic and utility-functional contents largely. And so, the result was analyzed about relation of scientific-engineering content of 'Arts & Design' subject is insufficient comparing with 'Design and Technology' subject Specially, I think that the design relation's unit learning program instances of 'Design and Technology' subject of the British primary school which have been presented by this research paper is a possibility becoming one reference model for a program development. And so I expects that this research could be applied in the program development for the primary design education of primary teacher & education agency.

• Archives of design research
• /
• v.19 no.5 s.67
• /
• pp.17-30
• /
• 2006

The early Joseon Dynasty is very important period of studying about Korean history of ceramics because various kinds of porcelain were produced like celadon, brown porcelain, white porcelain, inlaid white porcelain, blue porcelain etc, $\ulcorner$sejongsilrok$\lrcorner$ $\ulcorner$Jiriji$\lrcorner$ was published and Saongwon established its branch. Moreover, there also had a sudden political change to Joseon Dynasty, so ceramic industry in Gangjin was closed and artisans in Gangjin scattered to find safer place. One of these place was Imiwueri and Chuhyunri, Joongmohyun in Sangju.(the name of the place in that times, now Modongmyun) Also, Sangju in Gyeongsangbuk-Do is one of the places where can get materials for producing white porcelain, so artisans in Gangjin could migrate to the place during change of regime to Joseon Dynasty which based on Sung Confucianism. In $\ulcorner$Tejongsilrok$\lrcorner$, it mentioned specific areas like Joongmo, Hwaryeong in Sangju, Gyeongsang-Do and we can find out about situations of ceramic production in the early 15 centuries with producing dishes for a Royal family. $\ulcorner$Sejongsilrok$\lrcorner$ $\ulcorner$Jiriji$\lrcorner$ mentioned Imiwueri and Chuhyunri and Sangju produced the half of porcelains. In $\ulcorner$Gyeongsangdojiriji$\lrcorner$, Sangju takes charge of 8 spots which is one third of ceramic production. $\ulcorner$Gyeongsangdojiriji$\lrcorner$ and $\ulcorner$Sejongsilrok$\lrcorner$ $\ulcorner$Jiriji$\lrcorner$ were published with same goals at the same year. In $\ulcorner$Gyeongsangdosokchanjiriji$\lrcorner$, there was deleted nine spots which included high, middle, low level compared with $\ulcorner$Seiongsilrok$\lrcorner$ $\ulcorner$Jiriji$\lrcorner$, and in $\ulcorner$Donggukyeojiseungram$\lrcorner$ there was entirely deleted the locations of porcelain spots and potteries.

• The Journal of Engineering Geology
• /
• v.15 no.2 s.42
• /
• pp.213-227
• /
• 2005

This study aims to assess the problems with investigation method and to suggest the complementary solutions by comparing the predicted data from surface investigation with the outcome data from underground cavern. In the study area, one(NE-1) of 6 fracture zones predicted during the surface investigation was only confirmed in underground caverns. Therefore, it is necessary to improve the confidence level for prediction. In this study, the fracture classification criteria was quantitatively suggested on the basis of the BHTV images of NE-1 fracture zone. The major orientation of background fractures in rock mass was changed at the depth of the storage cavern, the length and intensity were decreased. These characteristics result in the deviation of predieted predicted fracture properties and generate the investigation bias depending on the bore hole directions and investigated scales. The evaluation of hydraulic connectivity in the surface investigation stage needs to be analyze by the groundwater pressures and hydrochemical properties from the monitoring bore hole(s) equipped with a double completion or multi-packer system during the test bore hole is pumping or injecting. The hydraulic conductivities in geometric mean measured in the underground caverns are 2-3 times lower than those from the surface and furthermore the horizontal hydraulic conductivity in geometric mean is six times lower than the vertical one. To improve confidence level of the hydraulic conductivity, the orientation of test hole should be considered during the analysis of the hydraulic conductivity and the methodology of hydro-testing and interpretation should be based on the characteristics of rock mass and investigation purposes.

• The Journal of Engineering Geology
• /
• v.27 no.3
• /
• pp.331-343
• /
• 2017

In this study to improve stability, workability and economics of the H-Pile+Earth plate or H-Pile+Earth plate+Cutoff grouting currently in use, we had developed HCS method belonging to the retaining wall which is consisting of a combination H-Pile, Plastic Sheet Pile and Steel Square Pipe for gap maintenance and reinforcement of flexible plastic Sheet Pile, and the behavior of each member composing HCS method is investigated by three-dimensional finite element analysis. To numerically analyze the behavior of the HCS method, we have performed extensive three-dimentional finite element analysis for three kinds of plastic Sheet Pile size, two kinds of H-Pile size and three kinds of H-Pile installation interval, one kinds of Steel Square Pipe and three kinds of Steel Square Pipe installation interval. After analyzing the numerical results, we found that the combinations of $P.S.P-460{\times}131.5{\times}7t$ (PS7) and H-Pile $250{\times}250{\times}9{\times}14$ (H250), $P.S.P473{\times}133.5{\times}9t$ (PS9) and H-Pile $300{\times}200{\times}9{\times}14$ (H300) is the most economical because these combinations are considered to have a stress ratio (=applied stress/allowable stress) close to that as the stiffness of H-Pile, plastic Sheet Pile and Steel Square Pipe composite increased, the horizontal displacement of the retaining wall and the vertical displacement of the upper ground decreased. Especially, due to the arching effects caused by the difference in stiffness between H-Pile and plastic Sheet Pile, a large part of the earth pressure acting on plastic Sheet Pile caused a stress transfer to H-Pile, and the stress and displacement of plastic Sheet Pile were small. Through this study, we can confirm the behavior of each member constituting the HCS method, and based on the confirmed results of this study, it can be used to apply HCS method in reasonable, stable and economical way in the future.

• The Journal of Engineering Geology
• /
• v.28 no.3
• /
• pp.411-429
• /
• 2018

Daeyoung mine (also called "Daema mine") produced gold and silver from mainly gold- and silver-bearing quartz veins. The mine tailings are a waste hazard, but most of the tailings were swept away or dispersed throughout the area around the mine long before the tailing dump areas were transformed into agricultural land. Soil liner and protection facilities, such as retaining walls, were constructed in the mine area to prevent the loss of tailings. The content of the tailings is 3,424.41~3,803.61 mg/kg, which exceeds the safety standard by a factor of 45. In addition, contamination was detected near agricultural areas and in the sediments in downstream drainage channels. A high level of As contamination was concentrated near the waste tailings yard; comparaable levels were detected in agricultural areas close to streams that ran through the waste dump yard, whereas the levels were much lower in areas far from the streams. The contamination in stream sediments showed a gradual decrease with distance from the mine waste yard. Based on these contamination patterns, we concluded that there are two main paths that affect the spread of contaminants: (1) loss of mine waste, and (2) the introduction of mine waste into agricultural areas by floods after transportation by streams. The agricultural areas contaminated by mass inflow of mine waste can act as contamination sources themselves, affecting other agricultural areas through the diffusion of contaminants. At present, although the measured effect in minimal, sediments in streams are contaminated by exposed mine waste and surface liners. It is possible for contaminants to diffuse or spread into nearby areas if heavy elements trapped in soil grains in contaminated agricultural areas leach out as soil solution or contaminant particles during diffusion into the water supply.

• The Journal of Engineering Geology
• /
• v.28 no.3
• /
• pp.475-488
• /
• 2018

This study evaluates geothermal system efficiency in terms of input power and heat exchange volume on the heat-source and load sides, by applying a combined open-closed type loop system comprising a geothermal system and a groundwater well to a cultivation site. In addition, this study analyzes the effects of heating and cooling for a complex geothermal system, by evaluating the temperatures of an external site and a cultivation site during operation. During cooling operations the heat exchange volume on the heat source side, average 90.0kW/h for an open type system with an input of 235L/minute groundwater, and 40.1kW/h for a closed type system with an input of 85L/minute circulating water, for a total average heat exchange volume of 130.1kW/h. The actual heat exchange volume delivered on the load side averages 110.4kW/h. The average EER by analysis of the geothermal system's cooling efficiency is 5.63. During heating operation analysis, the heat exchange volume on the heat source side, average 60.4kW/h in an open type system with an input of 266L/minute groundwater, and 22.4kW/h in closed type system with an input of 86L/minute circulating water, for a total average heat exchange volume of 82.9kW/h. The actual heat exchange volume delivered on the load side averages 112.0kW/h in our analysis. The average COP determined by analysis of the geothermal system's heating efficiency is 3.92. Aa a result of the tradeoff between the outside temperature and the inside temperature of the production facility and comparing the facility design with a combined well and open-closed loops geothermal(CWG) system, we determine that the 30RT-volume CWG system temperature are lower by $3.4^{\circ}C$, $6.8^{\circ}C$, $10.1^{\circ}C$ and $13.4^{\circ}C$ for ouside temperature is of $20^{\circ}C$, $25^{\circ}C$, $30^{\circ}C$ and $35^{\circ}C$, respectively. Based on these results, a summer cooling effect of about $10^{\circ}C$ is expected relative to a facility without a CWG system as the outside temperature is generally ${\geq}30^{\circ}C$. Our results suggest that a complex geothermal system provides improvement under a variety of conditions even when heating conditions in winter are considered. Thus It is expected that the heating-cooling tradeoffs of complex geothermal system are improved by using water screen.