• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.29 no.3
• /
• pp.223-228
• /
• 2023

Sustainable energy supplies without the recharging and replacement of the charge storage device have become increasingly important. Among various energy harvesters, the triboelectric nanogenerator (TENG) has attracted considerable attention due to its high instantaneous output power, broad selection of available materials, eco-friendly and inexpensive fabrication process, and various working modes customized for target applications. In this study, the amount of voltage and current generated was measured by applying the PSD profile random vibration test of the electronic vibration tester and ISTA 3A according to the time of Anodized Aluminum Oxide (AAO) pore widening of the manufactured TENG device Teflon and AAO. The discharge and charging tests of the integrated module during the random simulated transport environment and the recognition distance of RFID were measured while agricultural products (onion) were loaded into the returnable folding plastic box. As a result, it was found that AAO alumina etching processing time to maximize TENG performance was optimal at 31 min in terms of voltage and current generation, and the integrated module applied with the TENG module showed a charging effect even during the continuous use of RFID, so the voltage was kept constant without discharge. In addition, the RFID recognition distance of the integrated module was measured as a maximum of 1.4 m. Therefore, it was found that the surface condition of AAO, a TENG element, has a great influence on the power generation of the integrated module, and due to the characteristics of TENG, the power generation increases as the surface dries, so it is judged that the power generation can be increased if the surface drying treatment (ozone treatment, etc.) of AAO is applied in the future.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.1942-1947
• /
• 2007

A thermoelectric module can be used for cooling or power generation. The basic requirements to achieve a significant thermoelectric performance are the same for both generators and coolers. Thermoelectric modules with $Bi_2Te_3$ materials are usually employed in the cooling applications below room temperature but it can also be used for the power generation in the similar temperature range. In the present study, the power generation with a $Bi_2Te_3$ thermoelectric module has been investigated. The temperature difference between the hot and cold sides of the module is maintained with electric heater and cold water from the circulating water bath. The result shows that the electric current generated increases with temperature difference and decreases with the load resistance. However, the voltage increases with both the temperature difference and load resistance. The electric power increases with temperature difference and it has the maximum value when the load resistance is about 4 ${\Omega}$ for a given device.

• The Journal of Korean Association of Computer Education
• /
• v.5 no.2
• /
• pp.39-48
• /
• 2002

It is general that the ICAI(Intelligent Computer Assisted Instruction) consists of 4 modules. Export module, Teacher module, Student module and Interface module. In each module construction, there should be some rules to control strategies efficiently and systematically that are related to the texts and assessment instruments, assessment results and evaluation, feedback, etc. It is necessary to use a method to classify the curriculum into sections with units and to represent the identified relationships between them. These relationships are available to all the process of learning, assessment, evaluation and feedback. In this paper, we propose the method to represent these units and relationships as a graph. In addition, we implement an internet-based courseware authoring tool to support the environment in which several expert can construct concurrently the courseware with cooperation between them.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.3
• /
• pp.454-459
• /
• 2018

The BIPV system must be designed to reflect the architectural and electrical characteristics simultaneously because it replaces the role of the exterior material of the building, which makes it difficult to design the BIPV. The thin film type BIPV module has an electrical characteristic that the open voltage is higher and the short circuit current is lower than that of the crystalline type BIPV module. However, there are many differences in the design of the array, the collector distribution board, and the inverter in the system configuration since the crystal type BIPV module has the opposite feature. In this study, a crystalline BIPV module and a thinfilm BIPV module were applied to actual buildings. As a result, the elements to be considered in designing BIPV system were derived, and the architectural and electrical characteristics were mutually analyzed.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.2 no.1
• /
• pp.11-15
• /
• 2009

In this study, we have developed the SMPS(Switched-mode power supply) power module for the medical kit. It is used the medical kit for improved supplying power better than the existing power module in performance, safety and reliability. The developed SMPS(Switched-mode power supply) is composed of the three fundamental electronic circuits, first one is for converting AC power to DC power, second one is for converting to high frequency, and the other is for absorbing noise frequency and preventing malfunction. It is possible for developed SMPS module to enlarge applications for PC, home appliances, switchboard as well as medical instruments.

• Journal of Korean Society for Quality Management
• /
• v.37 no.3
• /
• pp.39-53
• /
• 2009

This paper suggests a new process structuring method, which we call process modularization, for decomposing and grouping activities in a process. Above all, we propose the concept of a module that is a group of activities positioned on the same flow before and after control constructs. Since activities in a module are relatively strongly interrelated with one another, it is important to take into consideration of these together. A design structure matrix (DSM) is used to structure the process because it has a lot of advantages in process modeling and analysis. We developed two algorithms: the restricted topological sorting (RTS) algorithm for ordering activities and the module finding (MF) algorithm for detecting modules in a process, which utilize the DSM. The suggested approach enables a firm's manager to design and analyze the process effectively. We also developed a supporting tool to accelerate the progress of process modularization. The supporting tool aids the process manager in finding the module and understanding the process structure easily. An illustrative example is addressed to show operations of the suggested approach.

• Korean Journal of Geomatics
• /
• v.3 no.2
• /
• pp.99-106
• /
• 2004

In order to meet the users' demand, who needs faster and more accurate data in geographic information, it is necessary to obtain and process the data more effectively. Now more effective data obtainments about geographic information is possible through the development of integration technology, which is applied to the field of geographic information, as well as through the development of hardware and software engineering. With the fast and precise correction and update, the development of integrate technology can bring the reduction of the time and money. To obtain fast and precise geographic information using Aerial Photogrammetry method, it is necessary to develop Airborne GPS/INS integration system, which makes GCP to the minimum. For this reason, this study has tried to develop a system which could unite and process both GPS and INS data. For this matter, code-processing module for DGPS and OTF initializaion module, which can decide integer ambiguity even in motion, have been developed. And also, continuous kinematic carrier-processing module has been developed to calculate the location at the moment of filming. In addition, this study suggests a possibility of using a module, which can unite GPS and INS, using Kalman filtering, and also shows the INS navigation theory.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.9 no.2
• /
• pp.47-52
• /
• 2003

This study conducted a basic study to develop ISM Code operation evaluation module, which is part of development of Safety Management System(ISM Code) Implementation supporting module. In particular, the significant of this study is that it established AHP operation evaluation analysis process, the design of questionnaire, and the hierarchical structure of operation evaluation model standard, focusing on the development of ISM Code operation evaluation module. Also, this study has its value in the point that it attempted to apply AHP scheme, which is part of the main decision­making in management science field, to develop operation evaluation module.

• Proceedings of KOSOMES biannual meeting
• /
• 2003.11a
• /
• pp.93-97
• /
• 2003

This study conducted a basic study to develop ISM Code operation evaluation module, which is part of development of Safety Management System(ISM Code) Implementation supporting module. In particular, the significant of this study is that it established AHP operation evaluation analysis process, the design of questionnaire, and the hierarchical structure of operation evaluation model standard, focusing on the development of ISM Code operation evaluation module. Also, this study has its value in the point that it attempted to apply AHP scheme, which is part of the main decision-making in management science field, to develop operation evaluation module.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.19-19
• /
• 2011

The appraisals of hydrology model behavior for flow and water quality are generally performed through comparison of simulated data with observed ones. To perform appraisal of hydrology model, some criteria are often used, such as coefficient of determination ($R^2$), Nash and Sutcliffe model efficiency coefficient (NSE), index of agreement (d), modified forms of NSE and d, and relative efficiency criteria NSE and d. These criteria are used not only for hydrology model estimations also for various comparisons of two data sets; This NSE has been often used for SWAT calibration. However, it has been known that the NSE value has some limitations in evaluating hydrology at watersheds under monsoon climate because this statistic is largely affected by higher values in the data set. To overcome these limitations, the SWAT auto-calibration module was enhanced with K-means clustering and direct runoff/baseflow modules. However the NSE is still being used in this module to evaluate model performance. Therefore, the SWAT Auto-calibration module was modified to incorporate alternative efficiency criteria into the SWAT K-means/direct runoff-baseflow auto-calibration module. It is expected that this enhanced SWAT auto-calibration module will provide better calibration capability of SWAT model for all flow regime.