• 한국태양에너지학회 논문집
• /
• 제39권5호
• /
• pp.1-10
• /
• 2019

Recently, the installation capacity of PV (photovoltaic) systems has been increasing not only field installation but also floating PV, farm land, BIPV/BAPV. For this reason, the new design and materials of PV module are needed. In particular, in order to apply a PV system to a building, lightweight of the PV module is essential. PV modules made of generally used texturing glass are excellent in output and reliability, but there is a limit to the weight that can be reduced. For the lightweight of the PV module, it necessary to use a film instead of a glass. However, the application of film rather than a glass may cause various problems such as decrease in photocurrent by decrease in transmittance and a increase of CTM (cell to module) loss, a degradation of the reliability, and so on. In this paper, PV modules using Ultra barrier film, which is recently a lot of interest as a substitute for a glass, its characteristic analysis and reliability test were conducted. The transmittance and UV characteristics of each material were verified, and the output of the fabricated 1 cell PV module was measured. In addition, 24 cell PV modules were fabricated at the lab-scale and its reliability tests were conducted. As a result of the experiment, the reliability characteristics of the ultra barrier film PV module were excellent, and it was confirmed that it could be used as the front material of the PV module instead of glass

• 융복합기술연구소 논문집
• /
• 제1권2호
• /
• pp.1-5
• /
• 2011

It is known that as many as 15-20 in 10,000 children are diagnosed with autistic spectrum disorder. A framework of the treatment system for children with autism using affective computing technologies was proposed by Chung and Yoon. In this paper, a prototype for the framework is proposed. It consists of emotion stimulating module, multi-modal bio-signal sensing module, treatment module using virtual reality, and emotion recognition module. Primitive experiments on emotion recognition show the usefulness of the proposed system.

• 한국전자통신학회논문지
• /
• 제2권3호
• /
• pp.174-179
• /
• 2007

본 논문에서는 유전자 알고리듬을 이용하여 전력, 면적, 속도를 고려한 저전력 모듈 선택을 제안한다. 제안한 알고리듬은 최적의 모듈 선택을 통해서 전력 소모를 최소화 할 수 있다. 비교 실험에서는 최적 모듈 선택을 고려한 알고리듬은 최대 전력 감소량은 26.9 %를 얻을 수 있었고, 반면에 최소 전력 감소량은 9.0% 얻었다. 모든 벤치마크 평균 전력 감소량은 15.525%가 되었다.

• 해양환경안전학회지
• /
• 제6권2호
• /
• pp.17-31
• /
• 2000

Port State Control(PSC) plays important roles in ensuring the ship＇ safety as well as preserving the marine environment in port and coastal sea. The effect of PSC carried out according to the procedure and document offered by Tokyo MOU depends greatly on inspector and inspection technique. So, it is very important to inspect ships impartially with advanced method. In the case of Korea, the only 30 percent of ships with deficiencies visited to ports are inspected due to the lack of PSC inspectors. So new inspection technique and module are required in order to improve inspection efficiency and to resolve problems mentioned. In this paper, we introduce a module for PSC inspection and evaluate it by inspecting 10 model ships and comparing with present method. The proposed module is expected to obtain the objectivity of inspection, to offer inspection guideline and to determine the priority of inspection ships.

• 한국멀티미디어학회논문지
• /
• 제18권10호
• /
• pp.1172-1179
• /
• 2015

A wireless license plate region extracting module is proposed for LPR system controlling multiple gates. This module is cheaply implemented using Raspberry Pi which is open source and high performance. First, as the upper 1/3 of the captured image is discarded as it has no useful information on license plate. Using the OpenCV libraries the edge image is got by Canny algorithm after applying Gaussian filtering to gray image, and the labeling is conducted for 4 consecutive numbers in license plate. These numbers are located using various decision equations, and expanding the numbers region the final license plate region can be extracted. The result image is transferred to Server using wifi direct. Using the proposed module it becomes easy to set up and maintain the LPR system. The experimental results showed that the successful extracting rate was 98.4% using 500 car images with 640 × 480 resolution.

• 한국전기전자재료학회논문지
• /
• 제18권7호
• /
• pp.628-634
• /
• 2005

We have simulated and proposed novel optical cavity, which has two elliptical mirrors, for NDIR gas sensor module and have tested it from 0 ppm to 2,000 ppm $CO_2$ concentration. The proposed sensor module shows the maximum peak voltage at 500 ms pulse modulation time, however, it shows a maximum voltage changes at 200 ms pulse duration with 18,000 times amplification gain. From 0 ppm to 2,000 ppm, the voltage difference of sensor module $({\Delta}V)$ shows 360 mV at 200 ms pulse duration and 3 sec turn-off time. The response time of designed sensor module is about 30 seconds.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.297-299
• /
• 2006

Many distributed applications is developed in various environment such as operating system, software platform. So, they exhibit different types of system behavior, status, during the course of their operation. Each such behavior may have different functional and non-functional requirements. Therefore, many distributed application need to fault-tolerance solution. Personal robot provide various service or application. Because personal robot has many application or service, it need to fault-tolerance architecture. A flexible architecture is required to provide dependability. In this paper, it is suggested a fault-tolerant architecture for module-based personal robot with module fault-tolerance, service fault-tolerance.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1106-1107
• /
• 2008

Building Integrated PV(BIPV) is one of the best fascinating PV application technologies. To apply PV module in building, various factors should be reflected such as installation position, shading, temperature, and so on. Especially a temperature should be considered, for it affects both electrical efficiency of a PV module and heating/cooling load in a building. It reports the effect of thermal characteristics of the PV module on generation performance. The study was performed by monitoring the temperature and experiment. The results showed that 1 degree temperature rise reduced about 0.48% of output power.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1110-1111
• /
• 2008

The life time of PV module is semi-permanent. But, because of installation and module fabrication process, its important part can not be finished. In this paper, we analyze 15 years old modules made from different company. Among the PV modules, the maximum power drop ratio was 12.23% minimum and 80.63% maximum. Also the effect of solar cell's short circuit current difference was analyzed. The PV module exposed about 65days, its the maximum power drop ratio was 1.29% minimum and 23.43% maximum. It is for reduction of current value. And the reason for current reduction was due to reduction of parallel resistance of solar cell. To prevent early degradation, it is need to have attention to fabrication, installation and maintenance.

• 한국멀티미디어학회논문지
• /
• 제20권11호
• /
• pp.1803-1810
• /
• 2017

A large amount of processing time is required if the process of detecting the touch position on the touch screen and displaying it on the display panel is performed only by software. In this paper, we propose a method to output information touched on the screen using H/W method in order to improve the response speed delay. In the FPGA module designed for the HDMI signal output to the display module, the touch information is input to the serial data signal including touch coordinate information, point size, and color information. Then the module render the image using HDMI signal input to the module and the touch information. This method has a pipeline structure so it has effect of reducing the delay time that occurs in outputting the touch information compared with the conventional software processing method.