• Korean Journal of Environmental Agriculture
• /
• v.36 no.4
• /
• pp.241-248
• /
• 2017

BACKGROUND: RNA interference (RNAi) eliminates or decreases gene expression by disrupting the target mRNA or by interfering with translation. Recently, RNAi technique was applied to generate new crop traits which provide protection against pests. To establish the environmental risk assessment protocol of RNAi LMO in lab scale, we developed dsRNA expression system using E. coli and tested acute oral toxicity assay to honey. METHOD AND RESULTS: The dsRNA expression vector, L4440, was chosen and cloned 240 bp of Snf7 and GFP gene fragment. To develop the maximum dsRNA induction condition in E. coli, we tested induction time, temperature and IPTG concentration in media. To estimate the risk assessment of dsRNA to honey bee, it has been selected and cultured with dsRNA supplement for 48 hours according to OECD guideline. As a result, the optimum condition of dsRNA induction was $37^{\circ}C$, 4 hours and 0.4 mM IPTG concentration and the difference between Snf7 and GFP dsRNA molecules from E. coli was not significant in survival and behavior to honey bee. Furthermore, blast search results indicated that effective match of predicted dsRNA fragments were not existed in honey bee genome. CONCLUSION: In this study, we developed and tested the acute oral toxicity of dsRNA using E. coli expression system to honey bee.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.11
• /
• pp.984-997
• /
• 2015

Chang'e-3 consisting of a lunar lander and exploration rover was launched on December 1, 2013 aboard a Long March 3B rocket flying from Xichang space launch center. Chang'e-3 was inserted into the lunar orbit after about a 5-day transit to the Moon and landed on the targeted landing site after orbiting around the Moon for 8 days. The successful landing of the Chang'e-3 gives a lot of help to analyze the future needs of the subsystem technologies and to figure out the trajectory from launch to lunar landing as well as operation sequences in the development of Korean lunar exploration is scheduled. Therefore, the configuration and analysis of overall mission of Chang'e-3 is performed based on the public information from the press and website. As a result, overall mission trajectory is reconstructed by solving boundary condition and then estimating control variable. Visibility status and eclipse status also analyzes so communication and power charge condition is as good as to operate lunar lander. Mass budget of the lander is derived using ${\Delta}V$ according to specific impulse.

• Journal of Digital Convergence
• /
• v.14 no.2
• /
• pp.183-190
• /
• 2016

This paper proposes algorithm to reduce the computing time in a neural network that reduces transmission of data for tracking mobile objects in surveillance networks in terms of detection and communication load. Object Detection can be defined as follows : Given image sequence, which can forom a digitalized image, the goal of object detection is to determine whether or not there is any object in the image, and if present, returns its location, direction, size, and so on. But object in an given image is considerably difficult because location, size, light conditions, obstacle and so on change the overall appearance of objects, thereby making it difficult to detect them rapidly and exactly. Therefore, this paper proposes fast and exact object detection which overcomes some restrictions by using neural network. Proposed system can be object detection irrelevant to obstacle, background and pose rapidly. And neural network calculation time is decreased by reducing input vector size of neural network. Principle Component Analysis can reduce the dimension of data. In the video input in real time from a CCTV was experimented and in case of color segment, the result shows different success rate depending on camera settings. Experimental results show proposed method attains 30% higher recognition performance than the conventional method.

• Korean Chemical Engineering Research
• /
• v.55 no.1
• /
• pp.60-67
• /
• 2017

In this study, we performed surface modification of biodegradable microcrystalline cellulose (MCC) to use as a filler in polyethylene (PE) composite in food packaging application. We modified MCC surface with (3-trimethoxysilylpropyl)diethylenetriamine (TPDT) silane coupling agent, which has one primary amino group and two secondary amino groups per molecule, to introduce amino groups with a carbon dioxide adsorption capability in MCC. Effects of each of the reaction conditions such as amount of TPDT introduced, swelling time, reaction temperature, and reaction time on surface modification degree of MCC were investigated by changing a variety of above reaction conditions. The amount of TPDT grafted on MCC surface and formation of chemical bonds were confirmed by Fourier transform infrared spectroscopy (FT-IR), elemental analysis (EA), X-ray photoelectron spectroscopy (XPS), thermogravimetric analysis (TGA) and solid state $^{29}Si$ nuclear magnetic resonance (NMR) spectroscopy. We confirmed increase of grafted amount of TPDT on MCC with increasing reaction time, reaction temperature, and amount of introduced TPDT.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.4
• /
• pp.1-9
• /
• 2012

As we are turnning into the aged society, accidents by falling down are increasing in the aged people's group. In this paper, we design the system with the 3-Axis acceleration sensor which is composed by a single chip. The body activity signal is measured with the signal detector and RF communicator in this proposed system and the and falling by the entering signal pattern analysis with 3-Axis acceleration sensor. For the RF communication, we are using nRF24L01p and 8bits ATmega uC for the processor. The error of energy expenditure estimation between motor driven treadmill and proposed a body activity module was 7.8% respectively. Human activities and falling is monitored according to analyze and judge the critical value of the Signal Vector. as falled down if they don't turn off the alarm after specific period and the aged person's after falling down activities are their position and more.

• Journal of Digital Convergence
• /
• v.14 no.6
• /
• pp.51-60
• /
• 2016

The modern state has always followed a variety of risks in the industrialization and informatization trends in the development of science and technology. Under such an environment, A matter of State compensation should take into consideration a variety of values such as harmony relief victims' rights in accordance with the principles of the rule of law, suppression of illegal acts of public servants, ensuring stable performance of official duties, the national treasury stability. As the state takes responsibility for an act of a public servant in a modern constitutional state, there may be a doubt on that the state takes responsibility only when there is a deliberation or a mistake. According to the theory of the self-responsibility, which suits the Constitution, the principle of liability with mistake on the State Compensation Law shall be excluded. I agree to the opinion that a subjective responsibility prerequisite such as a deliberation or a mistake is not required in relation to the liability of reparation on the State Compensation Law. Therefore, it is needed to convert the principle of state liability of reparation from the principle of liability with mistake to the principle of liability without mistake through a fundamental revision of the State Compensation Law.

• Journal of Digital Convergence
• /
• v.14 no.11
• /
• pp.225-232
• /
• 2016

The purpose of this study is to analyze the effect of the glass ceiling induction factors on the improvement of the job Commitment on the glass ceiling perception and to analyze the effect of the organizational Commitment on the influence of the local medical institute and private medical institute employees. Purpose. As a research method, structural equation model analysis was carried out to investigate the influence relationship of each factor. In particular, multiple group analysis was performed to analyze the difference of influence relations between public and private medical personnel. Respectively. Result, First, empirical studies on the effect of the glass ceiling inducing factors on job Commitment showed that job Commitment was influenced by stereotype and organizational culture, and the magnitude of the influence was different. Second, the employees of the room medical center were influenced by perceived promotion, job placement, education and training, reward, and job satisfaction. Third, in the hypothesis that job Commitment will be affected by the perception of glass ceiling, only the workers of the private medical center showed significant results. Based on the results of this study, it will be necessary to plan policies to improve the perception of the glass ceiling phenomenon and improve its status in order to improve the personnel and system that women workers in the medical field can enter more senior management positions.

• Journal of Digital Convergence
• /
• v.16 no.1
• /
• pp.281-286
• /
• 2018

In recent days, when the development in smartphones has made it common to operate objects by using them, this study aimed to present a guideline for the UI/UX designs for applications which are necessary for operating various objects through the wireless communication technology. To suggest the application guideline, existing object control application case studies were analyzed, and based on this investigation the object control application UI/UX design guidelines were proposed. This study classified the types of wireless connections used by smartphones (LTE, Wi-Fi, Bluetooth, NCF, RFID) and analyzed the necessary design factors for operating objects by each type. Based on such analysis, this study presented the design sequence, factors, and methods for the UI/UX guidelines of applications. First, the method of connection was selected; second, the control device was selected. This new direction for designing smartphone applications for operating objects will likely help systemize the design process and enable the user to operate the object more intuitively. In future research, case studies will be designed applying the guidelines suggested from this study.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.30 no.5
• /
• pp.453-460
• /
• 2017

In the offshore industry, helicopters are mainly used for transportation of goods or operating personnel between offshore sites and onshore facilities. A helideck is a structure that is required for landing and take-off of helicopters on the offshore structure. There are several shapes of helidecks depending on the type of offshore structures or installation location. Among them, cantilever-type helidecks usually provide more space on the topside of offshore structures and it is safer against potential accidents like fire or explosion. In this paper, the cantilever-type helideck is selected for the research object and topology design optimization is applied for lightweight design of the helideck. A finite element model is then created from the optimal layout of truss structures of the helideck, and structural analysis is performed under various landing conditions and wind loads. Based on the analysis results, the detailed section dimensions of structural members are determined so that the maximum stress at each structure member does not exceed the allowable stress of the structural material. Also, the final optimal design shows significant decrease in the total weight of the helideck.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.5
• /
• pp.309-316
• /
• 2014

It is easy to reverse engineer an Android app package file(APK) and get its decompiled source code. Therefore, attackers obtains economic benefits by illegally using the decompiled source code, or modifies an app by inserting malware. To address these problems in Android, we propose an APK overwrite scheme that protects apps against illegal modification of themselves by using a new anti-reverse engineering technique. In this paper, the targets are the apps which have been written by any programmer. For a target app (original app), server system (1) makes a copy of a target app, (2) encrypts the target app, (3) creates a stub app by replacing the DEX (Dalvik Executable) of the copied version with our stub DEX, and then (4) distributes the stub app as well as the encrypted target app to users of smartphones. The users downloads both the encrypted target app and the corresponding stub app. Whenever the stub app is executed on smartphones, the stub app and our launcher app decrypt the encrypted target app, overwrite the stub app with the decrypted target one, and executes the decrypted one. Every time the target app ends its execution, the decrypted app is deleted. To verify the feasibility of the proposed scheme, experimentation with several popular apps are carried out. The results of the experiment demonstrate that our scheme is effective for preventing reverse engineering and tampering of Android apps.