• Journal of Korea Water Resources Association
• /
• v.47 no.4
• /
• pp.397-409
• /
• 2014

In this study, the assessment scheme has been developed to evaluate the ecological function of rivers which were changed by the river improvement project. The evaluating factors are composed of physical structure in river channels and ecological connectivity in river areas, and each value of the factors is quantified based on 4 and 2 variables, respectably. This scheme was applied to past (1918, before artificial river improvement) and present Mankyung River area. A GIS model was adopted for calculating, analysing, and presenting river ecological conditions using the 204 grids and 7 reaches in study area. Comparison results show that the evaluation grade was decreased in both factors after river improvement. The main causes of lower grade (from II to IV) for physical structure are the river straightening and crossing structures. The reduction (from II to III) in ecological connectivity grade effected by linear fragmentation due to roads and rails is found to be greater than areal fragmentation due to land-use. In particular, it is also found that a high degree of ecological connectivity in 1918 was distributed along the river, but that one in 2007 showed a tendency to scatter because of the construction of levee and increase of urbanized area.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.10 no.1
• /
• pp.146-157
• /
• 2007

Fishing villages have rich potential on account of serving as a base of fishing activities with various maritime ecosystem, culture and maritime resources as well. The object of the study is ports located in Gijang, Busan and it presents the overall development direction in ports within this area. Through systematic and well-planned developing small-sized ports, this research analyzes regional economic implications by improving settlement conditions for fishing villagers scattered around this area taking the ports' natural traits into consideration. The research correlates regional input output analysis by fishing port arrangement project with connection between inter-industries and inter-regions according to the model of input-output analysis and attempts to systematically analyze regional economic structure with the economic implication divided into production, employment and income, influenced upon by the change of political exogenous variable.

• Journal of the Korean Geographical Society
• /
• v.41 no.6 s.117
• /
• pp.682-700
• /
• 2006

This study aims to show a model of environmental planning towards sustainable science parks. For the purpose of this study, an analysis of the environment of green space at sustainable science parks as pertaining to environmental soundness, ecological stability and landscape aesthetics is applied as a case study to Osong Bio-Health Science Technopolis, a developmental promoted district. Considering the factors resulting from Habitat Agenda(II) and other preceding studies, this study derives fifteen elements of environmental planning for sustainable science parks. A questionnaire/survey was conducted with relation to these fifteen elements to officials who would be moved to Osong Bio-Health Science Technopolis. From this survey, it is shown that respondents have a strong awareness that for the sustainable environment of a science park, the park should preserve as much green space as possible, and that the park should be in harmony with the surrounding natural environment. The practice of forestation at sustainable science parks not only develops a healthy environment that promotes an image of green, but also promotes a stable ecological system. As such, this study suggests alternatives to environmental planning from the perspective of landscape ecology by assessing the project of developing Osong Bio-Health Science Technopolis. To continuously maintain landscape aesthetics, one needs to control the height of buildings, lest the forests should be hidden by the buildings.

• Korean Journal of Construction Engineering and Management
• /
• v.11 no.2
• /
• pp.45-53
• /
• 2010

When increasing quantity of construction wastes, how to deal with construction wastes and environmental problems relating to disposal of construction wastes are discussed as social issues, treatment of construction waste and subsidiary issues are raised as important problems. The demolition work produce construction wastes most in construction industry. Various researches on eco-friendly treatment of construction wastes, recycling rates and recycled materials were conducted aspect of sustainability in developed countries, however, domestic remodeling projects were performed demolition work with first-demolition and second-classification method which emphasize productivity focused on efficiency. It caused not only environmental problems, but also economical problems such as increasing disposal cost of construction wastes. Solving these problems, the previous study, suggested the process model of eco-friendly demolition work to recycle materials. This paper applied eco-friendly remodeling process to practical projects and economic feasibility on eco-friendly remodeling process. Moreover these results expect to contribute the revitalization of eco-friendly demolition work in remodeling projects.

• Korean Journal of Construction Engineering and Management
• /
• v.14 no.6
• /
• pp.38-48
• /
• 2013

Focusing on repetitive works of construction, many research have been conducted about application of the learning curve effect. However, it is still controversial, especially on the high-rise project, since the productivity improvement from the learning curve effects are hard to prove. In the previous research, applicability of the learning curve was mainly derived from the labor productivity data. Although the research were based on the real data, they merely concentrated on the simple conclusion that the labor productivity had improved or not, instead of the process interpretation. Therefore, the purpose of this research is to analyze the influence factors of the learning curve effect in high-rise projects and elucidate the offset factors of the effect. Based on these factors, a model for estimating the labor productivity containing the concept of process learning is suggested. Through our research, traditional learning curve theory could be compensated and re-established with having more appropriateness for high-rise projects.

• Korean Journal of Construction Engineering and Management
• /
• v.16 no.1
• /
• pp.24-34
• /
• 2015

As recent multilateral collaboration design system has been advanced, BIM based data exchange is a key factor for successful next generation building project. Even though many studies have been trying to set up a data compatibility system for collaboration, There are still a lot of problem in data exchange between design and engineering phase. Therefore, In this study, we analysis causes of problem for information exchange and suggest a IFC based Information exchange framework for improving BIM based design collaboration environment. In order to find out problems that hinder establishment of advanced open BIM information exchange, proper analysis about transition of process from current and to-be BIM based design collaboration process is important, at first. From analysis of main obstacles to information exchange, this research suggests solution plan using open API and IFC based BIM collaboration supporting system. The suggested open API solution named Integrity feedback system perform a role making up for weak point derived from IFC based data exchange. And main system suggestion about framework for IFC based information exchange reflect technological system support, requirement of function for collaboration including API/BCF plug-in.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.sup3
• /
• pp.11-15
• /
• 2016

Gastrointestinal cancers remain the most prevalent cancers in many developing countries such as Iran. The aim of this study was to estimate incidence, prevalence and mortality, as well as time trends for gastrointestinal cancers in Isfahan province of Iran for the period 2001 to 2010 and to project these estimates to the year 2020. Estimates were driven by applying the MIAMOD method (a backward calculation approach using mortality and relative survival rates). Mortality data were obtained from the Ministry of Health and the relative survival rate for all gastrointestinal cancers combined was derived from the Eurocare 3 study. Results indicated that there were clear upward trends in age adjusted incidence (males 22.9 to 74.2 and females 14.9 to 44.2), prevalence (males 52.6 to 177.7 and females 38.3 to 111.03), and mortality (males 14.6 to 47.2 and females 9.6 to 28.2) rates per 100,000 for the period of 2001 to 2010 and this upward state would persist for the projected period. For the entire period, the male to female ratio increased slightly for all parameters (incidence rate increased from 1.5 to 1.7, prevalence from 1.4 to 1.6, and mortality from 1.5 to 1.7). In males, totals of 2,179 incident cases, 5,097 prevalent cases and 1,398 mortality cases were predicated to occur during the study period. For females the predicted figures were 1,379, 3,190 and 891, respectively. It was concluded that the upward trend of incidence alongside increase in survival rates would induce a high burden on the health care infrastructure in the province of Isfahan in the future.

• Journal of Navigation and Port Research
• /
• v.28 no.1
• /
• pp.51-58
• /
• 2004

Due to the changes in market place, new business types(e.g. e-business} have been rapidly emerged and increased. However, those new business types have not much been emerged in port and logistics related industries, and adoption rate of e-business in this area is very low, compared to other industries. Thus, to promote e-business in this area, many policies have been studied. However, most of previous studies have not been based on industrial structure, and results of these studies have mostly been case by case. Further, there have been no research based on the related theories. As a result, despite many of research and project for shipping and port related e-business, prominent achievements in this area have never to be presented. For these reasons, it am be stated that, first of all, basic studies related to new business types in shipping and port are needed, and then, various policies based on results of those basic studies should be discussed. The aim of this study is to classify business types existed (or expected) in a port related industry, ship bunkering. This taxonomy was based on theories related to business layer(BL) and value chain(VC), and these BL and VC combination enabled to acquire all possible business types.

• Journal of Korean Society for Atmospheric Environment
• /
• v.30 no.2
• /
• pp.188-200
• /
• 2014

The IPCC 5th Assessment Report (Climate Change 2013: The Physical Science Basis) was accepted at the 36th Session of the IPCC on 26 September 2013 in Stockholm, Sweden. It consists of the full scientific and technical assessment undertaken by Working Group I. This comprehensive assessment of the physical aspects of climate change puts a focus on those elements that are relevant to understand past, document current, and project future of climate change. The assessment builds on the IPCC Fourth Assessment Report and the recent Special Report on Managing the Risk of Extreme Events and Disasters to Advance Climate Change Adaptation. The assessment covers the current knowledge of various processes within, and interactions among, climate system components, which determine the sensitivity and response of the system to changes in forcing, and they quantify the link between the changes in atmospheric constituents, and hence radiative forcing, and the consequent detection and attribution of climate change. Projections of changes in all climate system components are based on model simulations forced by a new set of scenarios. The report also provides a comprehensive assessment of past and future sea level change in a dedicated chapter. The primary purpose of this Technical Summary is to provide the link between the complete assessment of the multiple lines of independent evidence presented in the main report and the highly condensed summary prepared as Policy makers Summary. The Technical Summary thus serves as a starting point for those readers who seek the full information on more specific topics covered by this assessment. Warming of the climate system is unequivocal, and since the 1950s, many of the observed changes are unprecedented over decades to millennia. The atmosphere and ocean have warmed, the amounts of snow and ice have diminished, sea level has risen, and the concentrations of greenhouse gases have increased. Total radiative forcing is positive, and has led to an uptake of energy by the climate system. The largest contribution to total radiative forcing is caused by the increase in the atmospheric concentration of $CO_2$ since 1750. Human influence on the climate system is clear. This is evident from the increasing greenhouse gas concentrations in the atmosphere, positive radiative forcing, observed warming, and understanding of the climate system. Continued emissions of greenhouse gases will cause further warming and changes in all components of the climate system. Limiting climate change will require substantial and sustained reductions of greenhouse gas emissions. The in-depth review for past, present and future of climate change is carried out on the basis of the IPCC 5th Assessment Report.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.7 no.3
• /
• pp.63-74
• /
• 2005

The cinema costume designers carry out the creative works in a different way from the commercial fashion designers generating the new trends by season or year for a number of people. Costumes created by the cinema costume designers are for the people acting in the film screens such as heroes, heroines or extras. The cinema costume designers should not miss the overall flow of a cinema. Moreover, the prominent designers have to devise the costumes livening up every scene. Most cinemas with the prudent interests and attention on the costumes are favored by the public and gain the commercial success. In particular, the cinemas emphasize the visual effects such as setting, lighting and computer graphics and require the substantial budgets for preparing the costumes regardless of genres, while all other industrial fields will be the same. Such efforts are to deliver the meaning and aesthetics that the cinemas intend to show through the designs, colors and textures of costumes closed up in each scene. The costumes in cinemas are another linguistic system and have the symbolic form of compound and meaningful communication used by the directors. The costume design is required to produce the costumes that liven up the characteristics of heroes or heroines as well as to fit for the general artistic effects of films. Moreover, it has to express the characters in the films using the costumes suitable for the film genres. Cinema costumes are defined and refined, and the process can be angst-ridden. Each frame of film is a canvas and has its own proscenuium. Every garment worn in a theatrical production is a costume. Before an actor speaks, his wardrobe has already spoken for him. From the most obvious and flamboyant show clothing, to contemporary clothes using subtle design language, costume design plays an integral part in every film production. Costume design is a vital tool for storytelling. Costumes have always had enormous influence on world fashion. Costume designers are passionate storytellers, historians, social commentators, humorists, psychologists, trendsetters and magicians who can conjure glamour and codify icons. Costume designers are project managers who have to juggle ever-decreasing wardrobe budgets and battle the economic realities of film production. Costume designers are artists with pen and paper, form, fabric and the human figure.