• Journal of The Korea Institute of Healthcare Architecture
• /
• v.6 no.11
• /
• pp.71-78
• /
• 2000

This study indicates bed-transfer as the significant behavior of a ward and points out architecture that cannot meet the patient's need. It is examined that inpatient's behavior depends on visibility, psychological security, privacy & communication, control, support and this study applies them to analyze the selected cases. This study also emphasizes the supportive role of hospital architecture so that the function of a ward as a healing environment may be maintained.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2020.11a
• /
• pp.129-130
• /
• 2020

This paper attempted to examine the characteristics of heat of hydration and calorific value of concrete according to the formwork material in Hot weather environment. As a result of the experiment, it was found that there were no problems such as temperature cracking and delay in hydration reaction when a synthetic resin form was used.

• Korean Journal of Construction Engineering and Management
• /
• v.17 no.6
• /
• pp.3-12
• /
• 2016

The purpose of this study is to provide a domestic applicable modular building construction process by benchmarking international best practices. In this study, we derive the risk factors that may occur in performing a modular construction projects and the modular construction management factors through case analysis. In order to effectively respond to risks in performing a modular building projects, we propose the modular building construction process which is separated by a transportation, lifting, assembly steps based on the unit module construction sequence. It is the key to providing management information and guidelines for the design, production, construction participants by reflecting the information for each step in the process. This study would prevent a potential hazard which may occur in the construction process. Consequently, It could result in saving the entire cost of modular construction project as shortening the project schedule and could improve workability of modular construction.

• Land and Housing Review
• /
• v.13 no.1
• /
• pp.113-129
• /
• 2022

A building's eco-friendliness is directly related to various values including the life cycle cost of a building. However, the conventional architectural design method has a limitation in that it cannot create an optimized case according to the surrounding environmental conditions. Therefore, the purpose of this research is to present a design assistance tool that can review planning cases optimized for the environmental conditions of the building site in the planning stage of architectural production. To achieve the purpose of the study, an algorithm for realizing 3D modeling of the region and analysis of the solar environment was produced based on the site contours, building, and road information from the digital topographic map provided by the National Geographic Information Institute. To examine the validity of the developed algorithm, a comparative experiment was conducted targeting the elevation direction of the existing building. As a result, it was found that the optimal elevation direction selected by the algorithm can receive higher insolation compared to the front facade of the main building.

• Journal of KIBIM
• /
• v.12 no.2
• /
• pp.49-59
• /
• 2022

The main idea of this study is to propose a BIM-based automation system drawing up a report of energy conservation plan in the architecture division. In order to obtain a building permit, an energy conservation plan must be prepared for buildings with a total floor area of 500m² or more under the current law. Currently, it is adopted as a general method to complete a report by obtaining data and drawings necessary for an energy conservation plan through manual work and input them directly into the verification system. This method takes a lot of effort and time in the design phase which ultimately increases the initial cost of the business, including the services of companies specialized in the environmental field. However, in preparation for mandatory BIM work process in the future, it is necessary to introduce BIM-based automatic creation system that has an advantage for shortening the whole process to enable rapid permission of energy-saving designs for buildings. There may be many methods of automation, but this study introduces how to build an application using Dynamo of Revit, in terms of utilizing BIM, and write an energy conservation plan by automatic completion of report through Dynamo and Excel's VBA algorithm, which can save time and cost in preparing the report of energy conservation plan compared with the manual process. Also we have insisted that the digital transformation of architectural process is a necessary for an efficient use of our automation system in the current energy conservation plan workflow.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.44 no.4
• /
• pp.45-56
• /
• 2016

In this study, an analysis has been conducted on the evaluation criteria of current G-SEED(Green Standard for Energy and Environmental Design) and on the 78 buildings, certified by G-SEED, for 3 years from November, 2012 to November, 2015. Based on the results of this analysis, four issues are driven and proposed hereinafter. Issue 1 : Nowadays, the psychological proportion of landscape architecture in building is getting greater than ever so that it shows reliable reduction of carbon dioxide. Therefore, so far as the eight kinds of buildings are concerned, the evaluation items of G-SEED must include those of landscape architecture mandatorily through its enlargement. Issue 2 : It is undesirable factor that inhibits precise evaluation on landscaping area to let other areas appraise landscape architecture because it requires outstanding professionalism. So, G-SEED should not only ensure landscaping professionalism for the correct evaluation but also let landscape area participate in assessing other areas. Issue 3 : Many previous researches turned out that landscape planting technique has excellent effect on saving energy and reducing temperature of buildings. Thus, landscape planting technique of landscape area is required to be one of the evaluation items of energy sector. Issue 4 : Tree management also has to be newly included as one of the evaluation factor for the maintenance relating to the landscape architecture. G-SEED, enacted and enforced by the Green Building Creation Support Act in 2013, surely is effective system to reduce carbon dioxide in buildings. This is a special Act in its nature that is superior to Construction Law and must be observed by all means to construct buildings. Under the umbrella of this legal system, various of researches and products are contributing to creating new jobs in construction area. However, it is a well-known fact that landscape architecture area has shown less interest on this Act than that of construction area. In conclusion, it is necessary that landscape industry should conduct continuous researches on G-SEED and pay more attention to the Act enough to harvest related products and enlarge its work area.

• Korean Journal of Heritage: History & Science
• /
• v.54 no.3
• /
• pp.90-105
• /
• 2021

The shape of the roof is very important, as it determines the beauty of the exterior of Korean wooden architecture. In particular, the curve of the eaves is the most representative of the characteristics of Korean wooden architecture. Rafters and buyeon (浮椽), flying rafters, create curves for the eaves, and buyeon in particular makes the roof lighter and more dynamic. Although the function and role of buyeon are already known, nothing is yet clear about the beginning of its use in Korean ancient architecture. Accordingly, the purpose of this study is to determine when buyeon was first used in Korean architecture. To this end, I examined various records, buildings, remains, and artifacts that have architectural shapes in Korea, China, and Japan. The results are summarized as follows. First, the use of buyeon in China appears during the Northern Qi Dynasty (北齊) in the mid-6th century, but became common in the 7th century during the Tang (唐) Dynasty. Second, the use buyeon in Japan appears in the mid-8th century, when the capital was relocated from Asuka (飛鳥) to Nara (奈良). It corresponds with the time that Japan began importing Chinese culture directly. Third, the use of buyeon in Korea may have been introduced to Baekje from China in the mid-6th century, but it was not common. It is believed that it became common after active exchanges with the Tang Dynasty during the Unified Silla Period in the mid-7th century.

• Journal of architectural history
• /
• v.14 no.4 s.44
• /
• pp.101-115
• /
• 2005

The main aim of this research is centered on the relation between nature and humans, and is to study the ecological characteristics appearing both in Landscape Architecture, one of the currents of ecological architecture as the architectural solution on the relation between humans and nature, and in our traditional architecture. Through this study, we were able to see that our traditional architecture was influenced by our ancestor's view of nature, and that the foremost feature of our ancestor's view of nature on our traditional architecture is not conflicting with nature, but, instead it is complying with it through seeking harmony with nature. Also we could see that our ancestor's view of nature is similar to Landscape Architecture having come to the fore toward the tendency of modern ecological paradigm in that it is the representation seeking the organic view of nature pursuing the oneness among artificial structure, humans, and nature. That is, we could figure out that various ecological features appearing in modem Landscape Architecture had been represented for a long long time, in a natural fashion, In the manner of space makeup in our traditional architecture. This is the characteristic of our ecological thinking system understanding nature and humans at the same context, and it has come down not only to our everyday living but to the manner of architectural solutions as well. Through this research, we could reconsider the modern value of ecological architecture inherent in our traditional architecture.

• Journal of the Korea Convergence Society
• /
• v.8 no.6
• /
• pp.227-235
• /
• 2017

The essence of architecture is space acquired as a result of architect's design act, but the object of the design is not the space and it is the physical elements to construct it. The masters of modern architecture have described the types of spaces that can be composed of these elements, but there is a difficulty in constructing the space because they does not mention how to construct it. From this point of view, if architecture is the techniques for human behavior and the art of building space, it is recognized that there is a need for concrete research on how to construct a space with ambiguous substance. Therefore, I conducted research on the extensibility of diagonal spaces through '4 Logements Studio' by Henri Ciriani, a representative architect of Neo Corbusian. The 'network for identity' method proposed by Ciriani was examined as a methode to realize spatial expansion and the furniture should be designed as an element of reading space and 3 optimal alternatives for 4 housing arrangements were obtained based on the Equivalence, Lighting, View, and Community life.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.10
• /
• pp.131-138
• /
• 2016

This study reviewed the status of domestic and foreign Architectural Information Systems and related laws, analyzed the state of the architectural service industry, and proposed the phased introduction of BIM into Architectural Information Systems. The adoption of BIM in Architectural Information Systems both at home and abroad is generally at an unsatisfactory level, with only Singapore assuming a leading role in this area through activities such as the provision of a separate BIM submission service. Since it is desirable for BIM to be applied to additional types of architecture when the architectural licensing procedure is introduced, the different phases of adoption were set after analyzing the scales and types of architecture as defined in related laws. By analyzing the participation rates of architectural design firms in each scale of architecture design, the results demonstrated that, as the number of floors and total floor area in the building increases, the proportion of small scale architectural design firms involved decreases, while that of large-scale architectural design firms increases. The adoption of BIM is occurring mostly within large-scale architectural design firms, which is why it is desirable for its introduction into Architectural Information Systems to be separated into phases from large-scale buildings to increasingly small-scale architecture. In conclusion, this study divided the adoption of BIM in Architectural Information Systems into 6 stages and, following the Architectural administration procedure, established a segmented road map for the gradual activation of BIM.