• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2012.06a
• /
• pp.175-175
• /
• 2012

Proper shaft alignment is one of the most important actions during the design of the propulsion system. The stiffness of recently designed marine propulsion shafting has been increasing remarkably, whereas hull structures have become more likely to deform as a result of optimized design of the scantlings and the high tensile steel. Therefore, to obtain the optimum status in shafting alignment at the design stage, it is strongly recommended that the change of bearing reaction force depending on ballast/load condition, the bending moment force occurred by propeller thrust, elastic deformation of bearing occurred by vertical load of shaft mass and etc., should be considered. This paper dealing with introduction of shaft alignment concerning long shaft for high speed vessel and review its reliability evaluation theoretically.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.768-773
• /
• 2005

We present an overview of our new method of liquid crystal (LC) alignment based on the anisotropic etching of the alignment layers with a directed plasma flux. The method is realized by the use of anode layer source of "race track" geometry generating two "sheets" of accelerated plasma. These sheets are directed obliquely to the treated substrates. The static and dynamic irradiation regimes have been explored. The optimized processing conditions and materials are discussed. The technique yields an excellent uniformity of liquid crystal alignment of planar, tilted and vertical types. It is shown that the new method can be easily adapted for the alignment treatment of large area substrates used in the modern LCD manufacturing process.

• Transactions on Electrical and Electronic Materials
• /
• v.7 no.6
• /
• pp.305-308
• /
• 2006

We have studied liquid crystal (LC) aligning capabilities for homeotropic alignment and the control of tilt angles on the $SiO_{x}$ thin film by electron beam evaporation method. A high tilt angle of about $86.5^{\circ}$ was obtained, and also the suitable tilt angle of the NLC on the $SiO_{x}$ thin film at $20{\sim}50\;nm$ thickness with e-beam evaporation can be achieved. The uniform LC alignment on the $SiO_{x}$ thin film surfaces with electron beam evaporation can be achieved. It is considerated that the LC alignment on the $SiO_{x}$ thin film by electron beam evaporation is attributed to elastic interaction between LC molecules and micro-grooves at the $SiO_{x}$ thin film surface created by evaporation.

• Journal of Institute of Control, Robotics and Systems
• /
• v.7 no.12
• /
• pp.1044-1050
• /
• 2001

This paper presents firstly the method of Euler angle matching designing the transfer alignment using the attitude matching. In this method, the observation directly uses Euler angle difference between MINS and SINS so it needs to describe the rotation vector error to the Euler angle error. The rotation vector error related to the Euler angle error is derive from the direction cosine matrix error equation. The feasibility of the Kalman filter designed for the transfer alignment by Euler angle matching is analyzed by the alignment error results with respect to the roll angle the pitch angle, and the yaw angle matching.

• Journal of Institute of Control, Robotics and Systems
• /
• v.3 no.3
• /
• pp.238-243
• /
• 1997

A new transfer alignment algorithm using the velocity and the quaternion partial matching methods is proposed to reduce the effect of a ship's Y-axis flexure on the performance of azimuth error estimation of Kalman filter. The simulation results show that it can significantly reduce the effect of Y-axis flexure on error estimation by the transfer alignment algorithm. As its results, azimuth transfer alignment error is reached up to 3 mrad under proper roll and pitch attitude motion of the ship.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.04a
• /
• pp.18-22
• /
• 2004

We have investigated the generation of pretilt angle for a nematic liquid crystal (NLC) alignment with rubbing alignment method on polyimide surfaces using thin plastic substrates. It was found that monodomain alignment of NLC is obtained with rubbing alignment method on polyimide surfaces using thin plastic substrates. The NLC pretilt angles generated are about $3^{\circ}$ by the rubbing alignment method on thin plastic substrates, However, the pretilt angle are at about $1.7^{\circ}$ lower on the glass substrate than on thin plastic substrate. Also, EO characteristics of the TN-LCD with a rubbed PI surface based on polymer are almost the same as that of the TN-LCD with a rubbed PI surface based on glass. However, the transmittances of the TN-LCD with a rubbed PI surface based on polymer is less than that with a rubbed PI surface based on glass.

• Management & Information Systems Review
• /
• v.32 no.2
• /
• pp.359-379
• /
• 2013

The purpose of this paper is to identify and analyze the effects for IT Innovation, IT Dependency and Usage of Enterprise Architecture on IT-Business Alignment that have been on the mind C-level executives for several decades. In order to substantiate 5 hypothesis related 4 variables, 120 IT experts had been surveyed and Partial Least Square Method had been used to analyze the result. The results presented in this research indicates that technical review and feasibility study for IT Project should be performed considerably to align IT and Business requirement efficiently. It also implies that increased IT Dependency in working process results in the clearer specification of requirements for IT Project.

• Journal of Korean Society for Quality Management
• /
• v.49 no.3
• /
• pp.245-254
• /
• 2021

Purpose: In order to accurately reach an underwater projectile to a target point, reliable INS and accurate arrangement of INS between master and slave INS is paramount. Unlike terrestrial and aerial environments, underwater projectile will operates in a restricted environment where location information cannot be received or sent through satellites. In this report, we review the factors affecting the transfer alignment of master and slave INS, as well as how to improve the positional error between INS through improved transfer alignment algorithms. Methods: In this work, we propose an improvement algorithm and verify it through simulation and driving test. The simulation confirmed the difference in the transfer alignment azimuth by fitting the MINS and SINS indoors, displacement in posture, and the process of transfer alignment between MINS and SINS through a driving test to confirm algorithm can improve the arrangement. Results: According to this study, reason for the error in the transfer alignment between MINS/SINS is the factors of the system where movements such as roll, pitch, yaw are not inter locked in real time due to the delay in transmit/receive system. And confirm that the improved algorithm has a desirable effect on accuracy. Conclusion: Through this work, it is possible to identify ways to improve the accuracy of underwater projectiles to reach their target points under various underwater environments and launch condition.

• Proceedings of the KSR Conference
• /
• 2003.10b
• /
• pp.123-128
• /
• 2003

The first design elements of horizontal alignment are very important things for improvement or movement in Railway. When the design elements are lost or damaged, it is necessary to recalculation. In this paper, an investigation is made on the method of representation of horizontal alignment as a result of design element using GPS method. The results show that northing calculated about $2\~10$ meters and easting calculated about $0\~7$ meters between calculated and design data in center points.

• Journal of Information Technology Services
• /
• v.14 no.2
• /
• pp.195-229
• /
• 2015

Service innovation is considered a new way to gain competitive advantage and enhance firm performance. However, service innovation does not always guarantee the desired outcome. The effective organization and management of well-planned service innovation practices, which are consistent with the firm's business environment, become a critical challenge for service innovation success. In addition, an increasing number of studies have focused on the role of information technology (IT) capability in service innovations. Most studies on service innovation have focused on the influences of the strategic alignment and IT capability separately. In contrast, the current study combines them by investigating the positive moderating effect of IT capability on the alignment between business strategy and service innovation strategy. Based on data collected from 183 service firms in Korea, we first explore the effect of service innovation strategies when coupled with different business strategies on better firm performance. We then investigate the moderating effect of IT capability on the relationship between strategic alignments and firm performance. Empirical evidence indicates that a synergistic effect between alignment and IT capability on firm performance exists. Firms that have aligned service innovation strategy with business strategy should consider improving their organizational IT capability to ensure substantial leverage.