• Journal of Korean Society of Archives and Records Management
• /
• v.22 no.1
• /
• pp.83-107
• /
• 2022

Although the ISO 30301 Management Systems for Records (MSR) Standard has established a standard system for records management to be promoted at the management level, only a few institutions have been certified, and there are few known cases. The purpose of this study is to present essential requirements for the establishment of MSR suitable for public institutions that want to acquire ISO 30301 standard certification, and through excellent cases of success in practice, various matters related to certification were used to help in the introduction of the ISO 30301 standard. In this study, cases of certified public institutions, local government funding agencies, and certification bodies (CB) were investigated and analyzed. In addition to the analysis of internal documents obtained through information disclosure requests, interviews were conducted with four public agency employees and one certification body auditor to capture the know-how and expertise of the individuals in charge who went through the certification screening process. Through the case study, the scope of the performance was divided into 1 to 5 stages so that organizations that want to acquire the certification can effectively obtain a certification, and the ISO 30301 Standard Certification Process was presented. Lastly, five ways were proposed to ensure that certification could be obtained effectively and practically.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.37 no.4
• /
• pp.52-63
• /
• 2009

WTO/TBT aims to reduce impediments to trade resulting from differences between national regulations and standards. Where international standards exist or their completion is imminent, the Code of Good Practice says that standardizing bodies should use them, or the relevant parts of them, as a basis for any standards they develop. Drawing is a formal and precise way of communicating information about the shape, size and, features. In addition, drawing is a part of the universal language of engineering. However there are many differences between international landscape drawing standard ISO 11091 and Korean landscape drawing practice(KLDP). The result of a comparison of ISO 11091 with KLDP and suggestions for international standardization of KLDP are summarized as follows. First, Among the 33 kinds of conventions from ISO 11091, 2 similar kinds and 15 different kinds from KLDP and 16 kinds of conventions which exist only in ISO 11091 appeared-for the international standardization of KLDP, it is necessary to make an extensive alteration of KLDP. Second, Europe Unity countries accepted ISO 11091 and are using it as their national standard for landscape drawing. Even Japan has accepted ISO 11091 on their civil engineering drawings and is using it as their national standard. Therefore, we need to hasten KS standard enactment based on ISO 1091. Third, For the KS standard of construction drawings, the degree of international standardization is rising even though there are still differences from the ISO standard. Therefore, since the burden on the international standardization of KLDP is expected to be weighed, preparations should be quickly brought about in the practice fields. Fourth, Since in the landscape planting ordinances of local independent governments is the standard presented by categorizing trees into evergreen and deciduous, such parts should be modified and introduced when enacting the KS standard based on ISO 11091. Fifth, For the enactment of the KS standard for landscape drawings, a wide range of opinions should be collected by the relevant landscape organization by installing a committee, and based on its recommendation, an application for the KS standard enactment of landscape drawing should be made to the chief of Ministry of Knowledge Economy.

• Journal of Soil and Groundwater Environment
• /
• v.17 no.3
• /
• pp.1-9
• /
• 2012

According to the agreement on WTO/TBT, we are under the situation to adopt international standard (ISO standard) as a national standard if it exists. However, in case of environmental area, it is a domestic legal obligation to use Korean environmental standard method(KESM) for analyzing various contaminants. Therefore it is necessary to assess the comparability between KEM and ISO standard prior to apply ISO standard to soil conservation law in Korea. The main purpose of this study is to assess the comparability of both methods for analyzing heavy metals in soil. We looked over various aspects like pre-treatment, calibration curve range, detection wavelength, soil organic matter content and so on. Apparently, the procedure of both methods is almost same. However in details, both methods are different in stationary time before aqua-regia extraction using reflux system, calibration curve range for Cu, Pb, Ni and measuring wavelength for Pb. According to the results of comparison test, the results were significantly different when the different calibration range was used. In case that all the extracts independent of methods were reanalyzed with the same calibration range of each method, both methods showed statistically same results. Other conditions like different stationary time, measuring wavelength of AAS and soil organic matter content did not have any influence on the analytical result. Therefore, we suggest to extend the calibration curve range to 0~8 mg/L which is used in KS I ISO standard(Korean standard related with environment which is translation version of ISO standard without any technical change). In case of $Cr^{6+}$, the results showed no significant differences between two methods even though the pretreatment, instrumentation and other analysis conditions were different. In addition to UV/Visble spectrometry of KESM for soil contamination, we suggest to adopt ion chromatography of ISO 15192(US EPA method 7199) for analyzing $Cr^{6+}$ with the consideration of laboratory work efficiency.

• Proceedings of the Safety Management and Science Conference
• /
• 2009.11a
• /
• pp.269-288
• /
• 2009

After enterprise get a certification in acquisition, the core requirements of ISO/TS 16949 standard is pull out the Performance Indicators by process access approach during the settlement and operation of system, and the pulled key performance indicators classified into the customer intention process, support process and management process and analyzed the effect to the management result. This study conducted with following step. Firstly, preceding research, the literature and investigation analysis about process approach method which is the special characteristics of ISO/TS 16949 standard. Secondly, each process of ISO/TS 16949 standard is classified and deduced the key performance indicators followed process access method. Finally, get a enterprise survey data related to improvement of Performance Indicator and analyzed by SPSS statistical software.

• Journal of the Korea Safety Management & Science
• /
• v.11 no.3
• /
• pp.227-237
• /
• 2009

After enterprise get a certification in acquisition, the core requirements of ISO/TS 16949 standard is pull out the Performance Indicators by process access approach during the settlement and operation of system, and the pulled key performance indicators classified into the customer intention process, support process and management process and analyzed the effect to the management result. This study conducted with following step. Firstly, preceding research, the literature and investigation analysis about process approach method which is the special characteristics of ISO/TS 16949 standard. Secondly, each process of ISO/TS 16949 standard is classified and deduced the key performance indicators followed process access method. Finally, get a enterprise survey data related to improvement of Performance Indicator and analyzed by SPSS statistical software.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.16 no.2
• /
• pp.95-104
• /
• 2020

Bribery is one of the world's most destructive and challenging issues. Yet despite efforts on national and international levels to tackle bribery, it remains a significant issue. Recognizing this, ISO has developed a new standard to help organizations fight bribery and promote an ethical business culture, which is "ISO 37001 - Anti-bribery Management Systems" in 2016. ISO 37001 can provide the tools and systems to greatly reduce the risk and help organizations deal with it effectively if it does arise. It is a flexible tool, which can be adapted according to the size and nature of the organization and the bribery risk it faces. After enforcing the Improper Solicitation and Graft Act, Korean government standardized ISO 37001, one of the Business Ethics of Global Standard, harmonizing International Standards into Korean Industrial Standards (KS) in 2017. It is meaningful in that Korean companies have localized regulation which applies to global standard anti-bribery management systems. Only about 100 organizations, however, have adopted ISO 37001 so far. The primary purpose of this paper is to examine the expectation and awareness of ISO 37001. Results show that still many organizations lack of awareness of ISO 37001 and it is implicated that much promotion and education will be necessary. This study has originality and value in that it can provide the guidelines for activation of ISO 37001.

• Journal of Korean Society of Archives and Records Management
• /
• v.15 no.2
• /
• pp.31-54
• /
• 2015

This study investigated the applicability of the Management System for Records Standard (ISO 30301) in university archives. To examine the current state of the university archives, we surveyed 57 university archives based on the requirements of ISO 30301. We analyzed the current state of the university archives through survey results and professional interviews. Subsequently, we suggested eight things that need improvement for the adoption of ISO 30301 in university archives.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.5
• /
• pp.531-542
• /
• 2017

The structural safety of small craft, such as steel ships and FRP ships, can be estimated using the measurement test of the hull plate thickness or the longitudinal bending strength test. A polyethylene boat is made using inexpensive HDPE and can be mass produced. The structural safety of a polyethylene boat cannot be guaranteed because a polyethylene boat hull is notspecified in the KR technical rules. The inspection procedure of sailing yachts and pleasure boats and drop test method of ISO standard 12215-5 propose the structural strength required for small crafts as the drop test height. Therefore, in this study, the drop test of a polyethylene boat hull was carried out based on the inspection procedure of a sailing yacht and pleasure boat and the drop test method of ISO standard 12215-5. The drop load was acquired by the drop acceleration ofa boat hull. Structural analysis and safety of a polyethylene boat were performed by the drop load and allowable stress criteria. The calculation results of the hull plate thickness by structural design specification of ISO standard 12215-5 showed that polyethylene boat hull was more than two times thicker than a steel ship hull and the boat hull determined by the inspection procedure of sailing yacht and pleasure boat and drop test method of ISO standard 12215-5 was more than 1.2 times thicker than the boat hull determined by structural design specification of ISO standard 12215-5. Therefore, inspection procedure of sailing yachts and pleasure boats and drop test method of ISO standard 12215-5 was much more conservative than the structural design specification of ISO standard 12215-5 and could be used as the structural design method of a polyethylene boat.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2000.04a
• /
• pp.417-426
• /
• 2000

This paper introduces the ISO 3010 which is the design standard for seismic action of International Standard Organization. Specially this paper focuses on the philosophical background and the weakness of ISO 3010,. The ISO 3010\ulcorner(Bases for design of structures-Seismic action on structure) were made in 1998 by the efforts of ISO/TC98 which is one working group of ISO. TC98 deals with " Bases for design of structures" in the field of architectural and civil engineering. The revised Committee Draft ISO/CD 3010 was made in February 1999. Even if ISO 3010 has not been complete yet this study carry out critical review of this committee draft.tee draft.

• Journal of Applied Reliability
• /
• v.14 no.2
• /
• pp.108-113
• /
• 2014

The demand against the risk analysis and information security of system from the companies or the agencies which operate an information system is increasing. ISO/IEC 27001 was established by ISO (International Organization for Standardization) and IEC (International Electrotechnical Commission). Also this standard is international and authoritative standard of ISMS (Information Security Management System). This paper is to review how the ISO 27001 ISMS Requirement has been established and improved, and to communicate the significant changes from ISO27001 : 2005 to ISO 27001 : 2013 focusing on reasons for revisions. Additionally, This paper shows case study for understanding ISO 27001 : 2013 implementation.