• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.39 no.4
• /
• pp.355-355
• /
• 2002

In this paper, we designed a FPU(floating point unit) that it is very important and requires of high density when digital audio is designed. Almost audio system must support the multi-channel and required for high quality. A floating point arithmetic function in MPEG-2 AAC that implemented by hardware is able to realtime decoding when DSP realization. The reason is that MPEG-2 AAC is compatible to the Audio field of MPEG-4 and afterwards. We designed a FPU by hardware to increase the speed of a floating point unit with much calculation part in the MPEG-2 AAC Decoder. A FPU is composed of a multiplier and an adder. A multiplier used the Radix-4 Booth algorithm and an adder adopted 1's complement method for speed up. A form of a floating point unit has 8bit of exponent part and 24bit of mantissa. It's compatible with the IEEE single precision format and adopted a pipeline architecture to increase the speed of a processor. All of sub blocks are based on ISO/IEC 13818-7 standard. The algorithm is tested by C language and the design does by use of VHDL(VHSIC Hardware Description Language). The maximum operation speed is 23.2MHz and the stable operation speed is 19MHz.

• The Journal of Korean Association of Computer Education
• /
• v.17 no.6
• /
• pp.93-102
• /
• 2014

A mobile office environment using mobile devices, such as tablet PC, mobile phone is gradually increased in enterprises, banking and public institutions etc which is no limitation on places. It occurs advanced and persist security threats that are required effective security management policy and technical solution to be secure. For BYOD (Bring Your Own Device) environment, technical security management solutions of network control based, MDM (Mobile Device Management), MAM (Mobile Application Management), MCM (Mobile Contents Management) were released, evolved and mixed used. In perspective of integrated security management solution, mobile security product should be selected to consider user experience and environment and correct quality evaluation model of product is needed which is provided standards and guidance on the selection criteria when it was introduced. In this paper, the most widely used MDM solution is selected to take a look at its features and it was reviewed the product attributes with related international standard ISO/IEC25010 software quality attributes. And then it was derived evaluation elements and calculated the related metrics based on the quality analysis model. For the verification of quality evaluation model, security checks list and testing procedures were established; it applied metrics and analyzed the testing result through scenario based case study.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.32 no.6
• /
• pp.818-824
• /
• 2003

This study was carried out to select Meju of a good quality through general composition analysis, organoleptic evaluation, and to conduct isolation, identification, and growth characteristics of main strain related to fermentation from selected Meju. Moisture and crude protein of Meju were 7.2∼28.8% and 32.7∼42.3%, respectively. The amino nitrogen contents of Kyongbuk and Chonbuk Mejus were 770.8 mg% and 239.9 mg%, respectively. And also, free amino acid and glutamic acid contents of Doenjangs made from Chonbuk and Kyongbuk Mejus were 4,169.6 mg% and 499.4 mg%, respectively. The result of sensory evaluation of Mejus collected from several regions showed Kyongbuk was the most suitable Meju in items of color, flavor, appearance and overall (p<0.05). The typical properties of B. lichenifomis NH20 strain isolated from Kyongbuk Meju showed gram positive, aerobic rod cell and motility. As major component among its cellular fatty acid composition, $C_{15:0}$ anteiso fatty acid, $C_{15:1}$ iso fatty acid, $C_{17:0}$ anteiso fatty acid, and $C_{17:0}$ iso fatty acid were 30.7, 28.9, 13.3 and 11.2%, respectively. It showed the same identification coefficient (0.653) compared to the standard strain. Therefore, it was identified to be B. licheniformis NH20 according to Bergey's Manual of Systematic Bacteriology and its fatty acid profiles. The optimum pH, temperature, salt content, and culture time of B. licheniformis NH20 were 7.0, 32$^{\circ}C$, 2%, and 9 hours, respectively.ctively.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.10
• /
• pp.4536-4542
• /
• 2011

RFID technology uses communication through the use of radio waves to transfer data between a reader and an electronic tag attached to an object for the purpose of identification and tracking. RFID technology can be applied to the various service areas such as, position determination technology, remote processing management and information exchange between objects by collecting, storing, processing, and tracing their informations from the tag attached to the objects using electronic wave by recognizing the information and environment of those objects. However, to revitalize these various services, it is important to test the RFID tag performance. But There are few instructions which have and hold the RFID emulator technology for organizing the RFID international test environment. Also there are not many manufacturing companies which recognize about the exact RFID test standard and requirements for the International Standards. In this paper, a construction of Tag Performance test environments and test methods are suggested which are required by EPCglobal or ISO/IEC. Details about RFID Tag performance test items proposed by ISO/IEC FDIS 18046-3 are explained, performed RFID Tag performance test through the performing test against each measured item, and draw a result for the RFID Tag performance of International Standards.

• Journal of Digital Convergence
• /
• v.15 no.5
• /
• pp.207-215
• /
• 2017

With rapid development of IT technology and biotechnology, human lifespan is extended rapidly, and we are living in the era where aging becomes the social issue. Due to this aging problem, manpower is mainly replaced by Automated Guided Vehicles (AGV) in manufacturing factories or warehouse logistics transportation. Rate of AGV use increases sharply every year. AGVs, which were used only in Smart Factories, extends its usage into indoor and outdoor operation by changing their usages to container transportation that can carry huge containers in the harbor. With the expansion of AGVs usage, the importance of RCS (Remote Control System) is also increased. In this study, we surveyed and analyzed the characteristics and technology trends of technical features of AGV's RCS that are developing in various ways to establish quality evaluation system of AGV RCS. Based on this, and by referring to international quality assessment standards, ISO/IEC 25000 series, we derived evaluation items on functional suitability and usability to secure reliability of AGV RCS. Also, it is our intention to develop evaluation model using those derived usability and reliability evaluation items.

• Fire Science and Engineering
• /
• v.28 no.1
• /
• pp.44-51
• /
• 2014

Smoke from fire is a mixture of combustion gases and particles which include micro-droplets formed from condensed organic vapors and carbonaceous agglomerates. The inhalation of smoke particles causes adverse health effects, and it is prerequisite for the hazard and risk analysis of the smoke particles to know how they behaviour in the respiratory tract. The characteristics of the absorption and adsorption of toxic gases and the amount and location of the particle deposition within the respiratory tract that determine the adverse health effects are related to the morphology and the size distribution of smoke particles. In the present work, as a preliminary study for the adverse health effects of smoke particles, the morphologies of the smoke particles from combustible materials were investigated for each fire stage: smouldering, well-ventilated flaming, small under-ventilated flaming, fully-developed under-ventilated fire. The steady-state tube furnace method given in ISO/TS 19700 was used for the generation of smoke particles. The fire stages were controlled by changing furnace temperature and equivalent ratio. The morphologies were analyzed by using Transmission Electron Microscope (Bio-TEM) by collecting the particles on TEM grids put on each stage of a cascade impactor.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.1
• /
• pp.99-106
• /
• 2018

This study presents experimental investigation on the residual capacity of fire-damaged voided slabs according to loading conditions. In this study, two voided slab specimens were fabricated, and heated by ISO standard fire during 120 minutes with different loading conditions of presence of loading. These specimens were cooled down to room temperature, and the residual capacity of fire-damaged voided slabs was investigated. Based on test results, thermal distribution of voided slab through the depth of concrete sections is different by the loading conditions. The temperature of loaded specimen is rapidly elevated through the whole depth of concrete sections compared to the unloaded specimen. The residual strength of fire-damaged voided slab specimens are 60% and 66% of that of voided slab specimen without fire damage, and the residual stiffness of fire-damaged voided slab specimens decreases by 15%~23% of that of voided slab specimen without fire damage. In case of voided slab specimens subjected ISO standard fire, the loaded specimen shows the decrease of 10% in the residual strength and the decrease of 15% in the residual stiffness compared to the unloaded specimen. It seems to result from higher temperature of bottom reinforcements in the loaded specimen due to the cracks, and more extensive damage on concrete cover of reinforcements by spalling process according to load level.

• Journal of Korean Society of Forest Science
• /
• v.89 no.3
• /
• pp.368-377
• /
• 2000

This study was conducted to examine the recent developments in timber certification schemes at global level such as FSC certification and ISO 14001 system and to analyze their potential impacts on the Korean forest products trade. Data and information on standards and procedure of timber certification and certified forest lands were collected from relevant papers, statistics and reports published by regional and international organizations. In order to analyze the impacts on the Korean forest products trade, questionnaire survey to the affected parties was conducted on acknowledge of key words relating to environment and trade and on the additional amount of willingness to pay for a labeled timber from environmentally sound and sustainably managed forests. Quantities of certified timbers supplied would continue to increase due to lots of timber certification schemes developed and implemented at national, regional and global levels and growing interests in certification from many countries. Demand for certified timbers, however, is far from clear at this stage. The deciding factor would be consumer reaction to the certified products. In the short run, the timber certification would have a little impacts on forest products imports into Korean markets since domestic purchasers do not have much interests in environment related trade measures and their willingness to pay price premiums for certified timbers is not high. However, it could be expected that timber certification has negative impacts on exports of forest products, such as flooring and plywood, to developed European markets where timber certification is used as a trade barrier.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.214-214
• /
• 2019

가뭄이 '심함' 단계 이상 도달 시에는 매주 수문분석을 수행하여 가뭄전망을 수행하여야 한다. 이를 위해서는 기상청의 강수량과 기온 등의 기상예측 자료가 필요하다. 현재 기상청에서는 3개월 기상전망으로 월단위 강수량과 평균기온을 매월 제공하고 있다. 1개월 전망에서 4주의 강수량합과 평균기온을 제공하고 있다. 하지만, 향후 4주간을 전망하는 1개월 전망에서는 1주단위의 강수량과 평균기온이 아닌, 4주간의 강수량합과 평균기온을 1주일 단위로 업데이트해 WINS에 제공하고 있다. 1주단위의 강수량과 평균기온을 취득하기 어려워, 평년 일단위 강수량과 평균기온 자료를 사용하여 4주간의 자료를 1주 단위로 분할하는 방법을 사용하였다. 주간단위 수문자료의 처리를 위해 국제표준기구(ISO)에서 제시하는 기준(ISO 8601)에 따랐다. ISO 8601은 월요일부터 일요일까지를 1주로 정의하며 현재 사용하고 있는 날짜체계와 1대1로 대응되도록 하였다. 예를 들면 1981년 2월 22일은 '1981-W07-7' 또는 '1981W077'로 표시한다. 표시된 형식은 1981년 7번째 주 일요일을 뜻한다. 이 기준에 따라 수문자료를 정리할 수 있도록 프로그램을 개발하였다. 주간 단위 잠재증발산량 계산은 월잠재증발산량 프로그램을 1주단위로 계산할 수 있도록 수정 및 보완하여 개발하였다. 수정 및 보완한 부분은 외기복사(外氣輻射)량 계산부분이다. 외기복사량은 지구가 태양을 1년 주기로 공전하므로 특정 위도에서 특정날짜에 따라 복사량이 달라지므로 주간단위의 월요일부터 일요일에 해당하는 날짜의 외기복사량을 각각 계산하고 이를 평균하여 주간단위 대푯값으로 사용하도록 하였다. 계산된 주간단위 외기복사량과 최고 최저기온을 입력하여 Hargreaves식에 의해 잠재증발산량을 계산한다. 융적설을 포함한 주단위 강우-유출 모형의 매개변수를 추정하기 위해 전국 24개 지점의 수문자료를 사용하였다. abcd 모형과 융적설모듈의 초기값 포함 11개 매개변수를 SCE-UA 전역최적화 알고리즘으로 추정하였다. 추정된 유역의 매개변수는 토양배수, 토양심도, 수문지질, 유역특성인자를 사용한 군집분석 결과에 의해 113개 중권역에 할당하였다. 개발된 주간단위 강우-유출 모형은 비교적 단기 가뭄전망을 위해 사용된다. 계산된 유량은 자연유량이며, 전국 취수장 수량, 하수처리장 방류수, 회귀수를 반영하여 지점별 유량을 계산하여 가뭄전망에 사용되고 있다.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.20 no.6
• /
• pp.774-780
• /
• 2014

This research aims to investigate the superstructure characteristics of the CFRP-yachts whose hulls are made of the light-weight material CFRP. CFRP-yachts, which belong to light-weight yachts, have a tendency of having very small superstructures compared to other vessels of the same length, and such a tendency is closely related to stability. In this research, a comparison of shape characteristics was made between common composite-plastic yachts and CFRP-yachts to find out the shape characteristics of CFRP-yacht. In the meantime, a case study was conducted concerning shape changes in superstructure to understand the effect of such changes on stability. For this purpose the shapes of a total of 10 GFRP-yachts and CFRP-yachts were comparatively analyzed, and the result showed the tendency of their hulls and superstructures. Whereas the case study on stability assessment involved various superstructure shapes of CFRP yachts, for assessment by superstructure size. Stability assessment was according to ISO 12217 (Small craft Stability and buoyancy assessment and categorization). A program was also developed based on stability assessment process due to rolling in beam waves and wind, and it was applied to the case study. The result of the case study showed that the windage area distribution tendency of the yachts whose hulls were made of the light-weight material CFRP was similar to that of the GFRP-yachts, but that the superstructure shapes of the CFRP-yachts were about 50% smaller than those of the GFRP-yachts. In addition, the stability assessment involving various superstructure areas of the CFRP-yachts showed that problems with stability occurred when their superstructure sizes were similar to, or larger by about 10% than, those of the GFRP-yachts.