• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.1081-1084
• /
• 1998

In this paper, we propose the bus coding technique for low power consumption. For CMOS circuit most power is dissipated as dynamic power for charging and discharging node capacitances.Though the I/O and bus are likely to have the very large capacitances associated with them and dissipate much of the power dissipated by an IC, they have little beenthe special target for power reduction. The conventional Bus-Invert coding method can't decrease the peak power dissipation by 50% because the additional invert signal line can invoke a transition at the time when Bus-Invert coding isn't used to code original bus data. The proposed technique always constraints the Hamming distance between data transferred sequentially to be below the half of the bus width, and thus decrease the I/O peak power dissipation and the I/O average power dissipation.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.1081-1083
• /
• 2003

The CC's main objective is to manage and control the various operation of the MSC camera. The CC has capability to control the various camera operation modes such as INIT mode, WAIT mode, STANDBY mode, READY IMAGING, DEFAULT READY IMAGING, IBIT and IMAGING mode as well as to manage the interface of the PMU. This paper also shows not only the design concepts in the both of the hardware and the operational software, but also the implementation results for the various CC functions.

• Clinical and Experimental Pediatrics
• /
• v.52 no.10
• /
• pp.1075-1081
• /
• 2009

Renal transplantation is the treatment of choice for children with end-stage renal disease. The outcome of pediatric kidney transplantation has improved dramatically in recent years, with lower acute rejection rates, superior graft survival, and low mortality. These improvements have allowed increased attention to other aspects of care for long-term survivors. Taking this into consideration, this review article will focus on the key issues related to pediatric kidney transplantation such as growth, neurocognitive function, nonadherence, and posttransplantation infectious complications, including lymphoproliferative disease, to broaden the understanding of pediatricians who provide pre-and postoperative care to children with end-stage renal disease.

• Proceedings of the IEEK Conference
• /
• 2002.07b
• /
• pp.1078-1081
• /
• 2002

In microcell or picocell mobile communication using cellular method, we suggested propagation prediction model which can accurately and rapidly interpret mobile communication propagation environment in urban, when subscriber service is done based on the main road in urban. Further, we simulated suggested propagation prediction model under the hypothesis of urban propagation environment of PCS mobile communication, analyzed receiving field strength by area within a cell, and finally suggested the optimal transmitting power and location condition of microcell or picocell mobile communication base station

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.1081-1086
• /
• 2008

During the manufacturing process of a propeller for a large scale commercial ships, several times of turn-over process should be required. Propeller turn-over is a indispensible process but not easy because of its heavy weight and complicate shape. Recently, we developed a new type of turn-over system for a large scale propeller. The system consists of turning roller devices, sliding transfer system, clamping devices and so on. In this paper, we described the design process which includes mechanical structure design, dynamic analysis and assembly with a laser tracker.

• Bulletin of the Korean Mathematical Society
• /
• v.54 no.3
• /
• pp.1081-1094
• /
• 2017

For a poset $P=(X,{\leq}_P)$, the linear discrepancy of P is the minimum value of maximal differences of all incomparable elements for all possible labelings. In this paper, we find a lower bound and an upper bound of the linear discrepancy of a product of two posets. In order to give a lower bound, we use the known result, $ld({\mathbf{m}}{\times}{\mathbf{n}})={\lceil}{\frac{mn}{2}}{\rceil}-2$. Next, we use Dilworth's chain decomposition to obtain an upper bound of the linear discrepancy of a product of a poset and a chain. Finally, we give an example touching this upper bound.

• Proceedings of the KIEE Conference
• /
• 1999.11d
• /
• pp.1081-1083
• /
• 1999

The capacitive coupling technique has been used as conventional method for PD detection on the power cable line. Recently, however PD measurement using by high frequency is known to have an excellent sensitivity comparison with low frequency on-site. In this paper, the high frequency characteristic of two type of metal foil sensor was studied and the technique was proved to be more effective diagnostic method than conventional method for qualification of EHV cable and accessories.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.1081-1085
• /
• 2002

A modeling is developed to predict the isolation performance of sound barrier systems under the sound pressure radiated from excited by point impact. The predicted results are compared with the measured results obtained by using APAMAT II. This instrument provides a combination of structure-borne noise and air-borne noise, which corresponds to rolling noise, by applying the excitation system projected steel balls against the steel sheet.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.1081-1083
• /
• 2007

The study in river basin has been performed for the identify water quality impaired stream segments, to create a priority ranking of those segments, and to calculate the heavy metal ion distribution for each impaired segment based on chemical and physical water quality standards. Two methods for modeling the potential area-specific heavy metal distribution are pursued in this study. First, a novel approach focuses on distance. Heavy metal distribution can be associated with a particular small geographic area. Based on the derived estimates an distribution map can be generated. Second, the approach is used the near watershed by means of kriging interpolation algorithm. These approaches provide an alternative distribution mapping of the area. The exposure estimates from both of these modeling methods are then compared with other environmental monitoring data. A GIS-based model will be used to mimic the hierarchical stream structure and processes found in natural watershed. Specifically, the relationship between landscape variables and reach scale habitat conditions most influential found in the Abandoned mine will be explored.

• Structural Engineering and Mechanics
• /
• v.53 no.6
• /
• pp.1067-1081
• /
• 2015

This study investigates structural and mechanical behaviors of RC (Reinforced concrete) beams strengthened with tapered CFRP (Carbon fiber reinforced polymer) sheets having various configurations. Toward this goal, experiments are performed on RC beams strengthened with four layers of CFRP sheets and each layer of the CFRP is prepared to have different length. Experimental results show that tapered CFRPs have better strengthening effect than non-tapered CFRP sheets and maximum loads of the beams with tapered CFRPs are governed by the length of first CFRP layer rather than total length of CFRP layers. In addition, analyses are performed using FE (Finite Element) models including cohesive elements to predict debonding behaviors between FRP and concrete elements. The predicted results from the FE models show good agreement with the experimental results.