• Proceedings of the Korea Society of Costume Conference
• /
• 2003.10a
• /
• pp.83-83
• /
• 2003

There is no other accessaries that is loved unchangeably in our clothes's life. It is always used except very hot season and it is loved as a necessity item of fashion coordination item used by catholic age group. There are many smart dressers who match more than ten scarfs to clothes otherwise having one or two before. The more having scarf is better for giving new images with usual clothes. The scarf fashion is boomed in streets from last season. Especially, luxury scarf is that popularity accessories in twenties women with a tendency of emphasizing wealth. The popularity of scarf can easily be recognized on the streets and on the displays in department. And the character brand of new basic feminie style is suggested the scarf as an accessary for coordination. It is appeared that animal prints, ethnic flower pattern prints and geometrical patterns for scarf. As the trend of fashion trade is diversified with classic and vintage, the design and style of scarf is satisfied. So there is a purpose of studying fashion scarf presentation to use scarf more efficiently.

• The Journal of the Acoustical Society of Korea
• /
• v.15 no.1E
• /
• pp.59-64
• /
• 1996

When the input-output record is available, the identification of a bilinear system is considered. It is assumed that the input is noise free and the output is contaminated by an additive noise. It is further assumed that the covariance matrix of the noise is known up to a factor of proportionality. The extended generalized total least squares (e-GTLS) method is proposed as one of the consistent estimators of the bilinear system parameters. Considering that the input is noise-free and that bilinear system equation is linear with respect to the system parameters, we extend the GTLS problem. The extended GTLS problem is reduced to an unconstrained minimization problem, and is solved by the Newton-Raphson method. We compare the GTLS method and the e-GTLS method in the point of the accuracy of the estimated system parameters.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.2
• /
• pp.98-104
• /
• 2012

In this paper, precision processing is carried out for the pre hardened steel(HRC 54), which is one of injection mould materials. Processing characteristics are estimated according to the number of tool cutting blade and roundness is observed by the 3-Dimensional measuring machine. The surface roughness affected by the wire electric discharge machining are measured. Cutting component force of STAVOX is the highest in condition of 2F processing because load per a blade of cutting tool is high. Especially, the difference in Fz is over 20N by cutting load. The slower spindle rotation speed and tool feed rate are, the better cutting component force is. The roundness of hole processed in condition of 4F is good because feed rate is able to be fast. When rotation speed is increased, the surface roughness is decreased. The surface roughness acquired in condition of 2F processing is higher about 50% than 4F processing.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.1025-1028
• /
• 2002

In this paper, a micro-turning lathe is introduced for micro machining of aluminum rod. To give feed motion, stepwise motion[2] actuators are used instead of the conventional inchworm mechanism. These are consisted of two Piezoelectric ceramics; one is for feeding the slider, and the other is for clamping the slider in the guide way of the body. The guide is V-form. The linearity and positional accuracy of the actuators is good enough far high precision motion. Since the system is more compact than the conventional system using three Piezoelectric ceramics, it is applicable for the micro-machine or MEMS unit. To fabricate the lathe, a small spindle unit with ball bearings of diameter of 10 millimeter is built-up on the top the slider. The motion is feed backed with miniaturized linear encoder attached each axis slider. The diamond tool bite is used for cutting tool. The machining is tried to make small diameter rod. The possible diameter that can be machined in this machine is presented as well as chip formation, surface roughness, and machinability.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.51 no.6
• /
• pp.221-227
• /
• 2002

In this paper, the system model for the compensation of the low-cost personal navigation system is derived and the error compensation method using GPS is also proposed. WNS(Walking Navigation System) is a kind of personal navigation system using the number of a walk, stride and azimuth. Because the accuracy of these variables determines the navigation performance, computational methods have been investigated. The step is detected using the walking patterns, stride is determined by neural network and azimuth is calculated with gyro output. The neural network filters off unnecessary motions. However, the error compensation method is needed, because the error of navigation information increases with time. In this paper, the accumulated error due to the step detection error, stride error and gyro bias is compensated by the integrating with GPS. Loosely coupled Kalman filter is used for the integration of WNS and GPS. It is shown by simulation that the error is bounded even though GPS signal is blocked.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.483-494
• /
• 2009

Since the embedded system is more intelligent, the importance of the reliability in the embedded system is a lot more visible. Especially the reliability of the embedded system in the train control system is even better important. As the special quality of the embedded system, the hardware of the system is directly controlled by the software in the embedded system. As the expansion of complexity, the expense amd the time for verification is required more and more. This paper is presented the verification of the reliability as the method with background of failure Embedded system is gradually, the importance of 'A built-in on the system embedded system's reliability is focused. In particular, in the train control system built-in of the embedded system, reliability is even more important. The embedded system of the system controls over hardware, software with built-in directly. The more complex system is, the more increasable of depending on the reliability of the time verification and expensive is. This paper is about he characteristics of the reliability and verification of embedded system under the failure mechanisms, based on the verification methodology suggested by in the train control system.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 1998.10a
• /
• pp.28-35
• /
• 1998

The seismic overstrength factor $\Omega$ is evaluated for 4-story reinforced concrete buildings in Korea(of which seismic intensity is low). The study model is designed according to aseismic guideline research - phase II in Korea. The effect of variation of span length and bay number, dead load is considered, especially including the variation of hardening ration after yielding. And push-over analysis is performed, in which the external and internal frame is connected by rigid-link and the $\Omega$ is calculated using the roof drift ratio at 2%. For Zone I, the mean value of $\Omega$ is ranged form 2.3 to 2.5, For Zone II, from 3.1 to 3.4. For low hardening ratio(3%) after yielding, $\Omega$ has little relations with the number of bay, like as the results of other research. But for 5% hardening ratio, $\Omega$ is increased as the number of bay is increased. Within general gravity-load bound, the variation of D.L. has variation of D. L. has no effect on $\Omega$. And, $\Omega$ is increased as the span length is increased.

• Journal of the Korean housing association
• /
• v.9 no.1
• /
• pp.109-120
• /
• 1998

The purpose of this research is to provide basic data for future home office design by surveying office workers' opinions about home-based working. The study is based on a survey done with 215 office workers in Seoul. The major findings are as follows. Home-based working is viewed as affirmative among office workers. Office workers thing that 3 days a week is desirable for working at home. The first reason why they want to work at home is 'having more free time for other interests,' the second one is 'being more creative or concentrating on work.'and the third one is 'reducing the stresses from the loaded tasks and relationships between colleagues'. While the first reason why they don't work at home is 'the notion that home is one thing and work is another.' the second one is 'lack of relationships between people.' and the third one is 'unable to concentrate on work because of many house chores.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.41 no.7
• /
• pp.809-822
• /
• 1992

A mathematical approach to solving the time-varying obstacle avoidance problem is pursued. The mathematical formulation of the problem is given in robot joint space(JS). View-time concept is used to deal with time-varying obstacles. The view-time is the period in which a time-varying obstacles. The view-time is the period in which a time-varying obstacle is viewed and approximated by an equivalent stationary obstacle. The equivalent stationary obstacle is the volume swept by the time-varying obstacle for the view-time. The swept volume is transformed into the JS obstacle that is the set of JS robot configurations causing the collision between the robot and the swept volume. In JS, the path avoiding the JS obstacle is planned, and a trajectory satisfying the constraints on robot motion planning is planned along the path. This method is applied to the collision-free motion planning of two SCARA robots, and the simulation results are given.

• Journal of Power Electronics
• /
• v.10 no.2
• /
• pp.181-186
• /
• 2010

This paper presents a new method for the estimation of State of Charge (SOC) for NiMH batteries. Among the conventional methods to estimate SOC, Coulomb Counting is widely used, but this method is not precise due to error integration. Another method that has been proposed to estimate SOC is by using a measurement of the Open Circuit Voltage (OCV). This method is found to be a precise one for SOC estimation. In NiMH batteries, the hysteresis characteristic of OCV is very strong compared to other type of batteries. Another characteristic of NiMH battery to be considered is that the OCV of a NiMH battery under discharging mode is lower than it is under charging mode. In this paper, the OCV is modeled by a simple method based on a hyperbolic function which well known as Takacs’s model. The OCV model is then used for SOC estimation. Although the model is simple, the error is within 10%.