• Journal of Korean Society of Forest Science
• /
• v.99 no.6
• /
• pp.808-815
• /
• 2010

This study is to give informations about management Situations and investment returns to someone who will newly cultivate schizandra or expand area of culture. This study used IRR, B/C Ratio and NPV for beneficial analysis. We surveyed fifty one among schizandra cultivation farmhouses in chief producing districts Gangwon Inje, Gyeongbuk Munkyung, Kyungnam Sancheong and Jeonnam Whasoon in Korea from May till September in 2009. So this study surveyed about inputted labors and materials, land price and etc. by working process to calculate producing and operating cost. Fruits of schizandra are sold from 5,000 won to 6,000 won per kg at locals. And IRR(Internal Rate of Returns), B/C Ratio and incomes ratio is calculated by three senarios 5,000 won, 5,500 won and 6,000 won per kg at locals. Discount rate is 3.00%. As the result of this study IRRs are -16.00%, -6.91%, 0.40% one after another and B/C Ratios are 0.81, 0.89, 0.97 one after another. And schizandra cultivation isn't profitable. When price of schizandra fruits is 6,200 won per kg, IRR is 3.00% and B/C Ratio is 1.00. Therefore, if price of schizandra fruits is over 6,200 won per kg, we judge that it is profitable. And income ratio is 23.9% on 6,200 won per kg.

• Journal of Korean Society of Forest Science
• /
• v.96 no.3
• /
• pp.348-356
• /
• 2007

The purpose of this study is to give the results of economic feasibility of industrial forest plantations, and also A/R CDM project in Indonesia to investors. In order to analyze economic feasibility of the industrial forest plantation and A/R CDM project, this study comparatively analyzes the feasibility based on three following scenarios: industrial plantation type; A/R CDM type; combination type of industrial plantation and A/R CDM project. In the aspect of IRR, the combination type has 11 % while the industrial plantation type has 8%. If the price of timber increases USD $5/m^3$ (from the standard price: USD $30/m^3$ to USD $35/m^3$), IRR of the industrial plantation type will increase from 8% to 14%. This result shows us that the IRR of the industrial plantation type is very sensitive to the price of timber. There is no economic feasibility of A/R CDM project if the price of lCER is under USD 5. In addition, IRR of the A/R CDM project type is the same to IRR of industrial plantation type (8%) when the price of lCER is USD 10. Finally, the total investment expenditure on 12,000ha of the combination type is approximately 13 billion won while the industrial plantation type is 13.6 billion won. It takes 11 year to reach the turning point in terms of profitability of the combination type while the industrial plantation takes 13 year. Thus, the economic feasibility of the combination type is higher than the other types(industrial plantation type and A/R CDM project type).

• Journal of Korean Society of Forest Science
• /
• v.59 no.1
• /
• pp.9-14
• /
• 1983

The study was performed to decide the returns or investment efficiency of the fuel forest established project and to examine its economic value as compared the benefit with the cost occurring from that established by I.B.R.D loan. The data got from the surveying plot and other things connected with the project were applied to the measures of benefit-cost ratio and internal rate of return (IRR). The following are the results from the economic analysis of the fuel forest created by the loan per hectare 1) In case of converting the fuelwood value from the fuel forest into briquet price, the benefit-cost ratio is 1.18 at the 6 percent discount rate and the IRR is appraised to 12.2 percent 2) In the sensitivity analysis estimated by the rising rate of rural wages 27% the yearly mean, the B/C ratio is 1.07 at the 6 percent discount rate and the IRR 9.2 percent. 3) In the sensitivity analysis estimated by the rising rate of briquet price, 26% the yearly mean, the B/C ratio is 1.34 at the 6 percent discount rate and the IRR is appraised high to 15.7 percent 4) In the event of including indirect effects to the direct in the project, the economic effect could be increased just a little more.

• New Physics: Sae Mulli
• /
• v.68 no.12
• /
• pp.1293-1301
• /
• 2018

The basic magnetic properties of commercially available High-$T_c$ Superconductor (HTS) GdBCO-coated conductor (GdBCO-CCs) were investigated by using physical property measurement system-vibrating sample magnetometer (PPMS-VSM). From the zero-field-cooled (ZFC) m(T) curve, the $T_c$ was found to be ~93 K. After removing the background m(H) data, we obtained both the net m(H) data and the ${\Delta}m_{irr}$. The $H_{irr}(T)$ coincided very well with the power-law relation $H_{irr}=H_{irr}(0)(1-T/T_c)^n$ with $$n{\sim_=}1.19$$. The magnetic flux behavior was investigated by using the ${\delta}$ values in the relationship $J_c{\propto}{\Delta}m_{irr}{\propto}H^{-{\delta}}$. A ${\delta}{\approx}0$ region denoting an independent magnetic flux pinning effect, a ${\delta}{\approx}0.6{\sim}1.2$ region representing a collective flux pinning effect due to the interaction, and a ${\delta}{\gg}2$ region representing freely moving magnetic fluxes caused by the Lorentz force were observed. The boundary line between ${\delta}{\approx}0$ and ${\delta}{\approx}0.6{\sim}1.2$ is denoted by a $H_1$, and the one between ${\delta}{\approx}0.6{\sim}1.2$ and ${\delta}{\gg}2$ is denoted by a $H_2$. The ${\delta}(T)$ was obtained in the region of $H_1$ < H < $H_2$. As the temperature was decreased, the ${\delta}$ value gradually decreased.

• Childhood Kidney Diseases
• /
• v.12 no.2
• /
• pp.186-193
• /
• 2008

Purpose : Intrarenal reflux(IRR) is backflow of urine from the renal pelvis into the collecting ducts. IRR is the main cause of renal injury in children with vesicoureteral reflux (VUR) which leads to renal scars, hypertension, proteinuria, and chronic renal failure. The purpose of our study was to investigate the characteristics of intrarenal reflux. Method : We retrospectively reviewed the medical records of 80 patients who were diagnosed as having grades of III-V VUR from Jan. 2004 to Dec. 2006 in the department of pediatrics in Ajou University Hospital. The patients were divided into two groups according to the presence of IRR on voiding cystoureterogram and compared to each other for the possible factors associated with intrarenal reflux. Results : Among 80 VUR patients, IRR(＋) group comprised 17(21.3%) patients and 27 renal units(23.2%) and revealed younger age, higher grade of VUR, and more proteinuria compared to IRR(-) group. There were no significant difference in gender, laboratory findings and the rate of resolution in VUR or defects on renal scan between two groups. Also, intrarenal reflux mostly corresponded to the same site of photon defects on DMSA scan. Conclusion : We suggest that intrarenal reflux tends to be associated with younger age, higher grade of reflux, more proteinuria with no difference in resolution rate of VUR when compared to the VUR patients without IRR. From this study, we were able to understand the characteristics of intrarenal reflux in children with urinary tract infection.

• Journal of Korean Society of Water and Wastewater
• /
• v.21 no.4
• /
• pp.375-383
• /
• 2007

Treatment efficiency research was performed using Fenton process and the electrochemical process in the presence of ferrous ion and hydrogen peroxide for the industrial wastewater including 1,4-Dioxane produced during polymerization of polyester. The Fenton process and the electrochemical Iron Redox Reaction (IRR) process were applied for this research to use hydroxyl radical as the powerful oxidant which is continuously produced during the redox reaction with iron ion and hydrogen peroxide. The results of $COD_{Cr}$ and the concentration of 1,4-Dioxane were compared with time interval during the both processes. The rapid removal efficiency was obtained for Fenton process whereas the slow removal efficiency was occurred for the electrochemical IRR process. The removal efficiency of $COD_{Cr}$ for 310 minutes was 84% in the electrochemical IRR process with 1,000 mg/L of iron ion concentration, whereas it was 91% with 2,000 mg/L of iron ion concentration. The lap time to remove all of 1,4-Dioxane, 330 mg/L in the wastewater took 150 minutes with 1,000 mg/L of iron ion concentration, however it took 120 minutes with 2,000 mg/L of iron ion concentration in the electrochemical IRR process.

• ETRI Journal
• /
• v.36 no.3
• /
• pp.510-513
• /
• 2014

A Q-band pHEMT image-rejection low-noise amplifier (IR-LNA) is presented using inter-stage tunable resonators. The inter-stage L-C resonators can maximize an image rejection by functioning as inter-stage matching circuits at an operating frequency ($F_{OP}$) and short circuits at an image frequency ($F_{IM}$). In addition, it also brings more wideband image rejection than conventional notch filters. Moreover, tunable varactors in L-C resonators not only compensate for the mismatch of an image frequency induced by the process variation or model error but can also change the image frequency according to a required RF frequency. The implemented pHEMT IR-LNA shows 54.3 dB maximum image rejection ratio (IRR). By changing the varactor bias, the image frequency shifts from 27 GHz to 37 GHz with over 40 dB IRR, a 19.1 dB to 17.6 dB peak gain, and 3.2 dB to 4.3 dB noise figure. To the best of the authors' knowledge, it shows the highest IRR and $F_{IM}/F_{OP}$ of the reported millimeter/quasi-millimeter wave IR-LNAs.

• Proceedings of the KSRS Conference
• /
• v.1
• /
• pp.25-28
• /
• 2006

We propose a new method of masking cloud-affected pixels in satellite ocean color imageries such as of GLI. Those pixels, mostly found around cloud pixels or in scattered cloud area, have anomalous features in either in chlorophyll-a estimate or in water reflectance. This artifact is most likely caused by residual error of inter-band registration correction. Our method is to check the pixel-wise 'soundness' of the spectral water reflectance Rw retrieved after the atmospheric correction. First, we define two spectral ratio between water reflectance, IRR1 and IRR2, each defined as RW(B1)/RW (B3) RW (B3) and as RW (B2)/RW(B4) respectively, where $B1{\sim}B4$ stand for 4 consecutive visible bands. We show that an almost linear relation holds over log-scaled IRR1 and IRR2 for shipmeasured RW data of SeaBAM in situ data set and for GLI cloud-free Level 2 sub-scenes. The method we propose is to utilize this nature, identifying those pixels that show significant discrepancy from that relationship. We apply this method to ADEOS-II/GLI ocean color data to evaluate the performance over Level-2 data, which includes different water types such as case 1, turbid case 2 and coccolithophore bloom waters.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.103-104
• /
• 2008

This paper proposes an alternative methodology for deciding an optimum deterministic reliability level (IRR; Installed Reserve Rate) by using probabilistic reliability criterion (LOLE; Loss of Load Expectation). Additionally, case studies using the proposed method induce the characteristics of relationship between the probabilistic reliability index (LOLE) and deterministic reliability index (IRR) for 2008 year in Korea power system. The case study presents a possibility that an optimum IRR level in Korea can be assessed using the proposed method. Korea power system has been using the LOLE criterion to determine the adequacy of installed capacity (ICAP) requirement. The criterion in Korea is that the loss of load expectation shall not exceed the available capacity more than five day in ten years (=0.5[days/year]). The probabilistic reliability evaluation and production cost simulation program which is called PRASim is used in order to evaluate the relationship and optimum IRR in this paper.

• Restorative Dentistry and Endodontics
• /
• v.45 no.1
• /
• pp.5.1-5.8
• /
• 2020

Objectives: The obturation quality of MTA, Biodentine, Total Fill BC root canal sealer (RCS), and warm gutta-percha (WGP) in teeth with simulated internal root resorption (IRR) was evaluated by using micro-computed tomography. Materials and Methods: Standardized IRR cavities were created using 40 extracted maxillary central incisor teeth and randomly assigned into 4 groups (n = 10). IRR cavities were filled with MTA, Biodentine, Total Fill BC RCS (bulk-fill form) and WGP + Total Fill BC RCS. Percentage of voids between resorptive cavity walls and obturation material (external void), and inside the filling materials (internal voids) were measured. Results: Total Fill BC sealer in the bulk-fill form presented significantly highest values of external and internal void percentages (p < 0.05). Biodentine showed a significantly lowest external void percentage (p < 0.05). WGP + Total Fill BC RCS presented significantly lower values of internal void percentages than all groups (p < 0.05), except Biodentine (p > 0.05). Conclusion: None of the filling materials were created void-free obturation in resorption cavities. Biodentine may favor its application in teeth with IRR over Angelus MTA and bulkfill form of Total Fill BC.