• 한국BIM학회 논문집
• /
• 제12권3호
• /
• pp.39-51
• /
• 2022

3D scan technology can utilize real spatial information as it is in virtual space, so it can be usefully used in various fields such as reverse engineering of buildings and process management. Recently, with the development of ICT technology, more precise scan data can be obtained, and scan processing time has also been greatly reduced. In addition, the combination of software and scanning equipment used in 3D scanning technology is very diverse, and results are very different depending on which technology is used. Accordingly, there is a problem that it is difficult for a user who has no experience in 3D scanning technology to determine which technology and equipment should be used to obtain good results. In this study, 3D scan technologies mainly used at home and abroad are investigated, classified, and tested at actual construction sites to suggest considerations and suitable 3D scan methods when using 3D scans in construction sites. The test results were analyzed to evaluate the time it takes to scan, the final quality, and the user's convenience according to each technology method.

• 한국의류학회지
• /
• 제46권5호
• /
• pp.910-926
• /
• 2022

Suitability for the human body, freedom to move and thermal insulation are important design considerations in military clothing. This study investigates the performance and wearer-satisfaction of the functional inner winter uniform currently used in Korea; it is hoped that our data can inform the development of a future version. Interviews were conducted, in which the participants suggested various improvements. The uniforms were mainly worn for guard duty or as daily attire in cold weather. The participants chose how many layers to wear according to the current situation, rather than sticking to the layering recommended in the manual. Layering choices did not significantly affect combat efficiency but were found to affect wearers' comfort. Wearers' satisfaction was found to depend on the convenience of the clothing, whether it was in the appropriate size, freedom to move and thermal insulation. Also, this study suggests a problem with the current size system, as the analysis of size distribution, across all sizes, the range of current production is insufficient to cover the demand.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 D
• /
• pp.1723-1725
• /
• 1999

This paper is the study for piezoelectric properties of PMN-PT-PZ composition for high power piezoelectric device. It needs the properties such as high mechanical quality factor(Qm), high electromechanical coupling coefficient(kp) and high dielectric strain constant$(d_31)$, and the stable electromechanical properties under high vibration level. For acquiring this results, the value of x is changed in 0.1Pb$(Mn_{1/3}Nb_{2/3})O_3$+(0.9-x)$PbZrO_3+xPbTiO_3$ composition to find MPB(morphotropic phase boundary), and the piezoelectric constants is measured by resonance-antiresonance frequency method, based on IRE Standard. Also, it is measured as a function of the amount of additive, $Nb_2O_5$. When the composition is applied to high power device, the electromechanical properties is measured by laser vibrometer to confirm the reliablity under high vibration level. From these results, PMN-PT-PZ composition is shown excellent properties and capacity of application to high power device.

• 대한전자공학회논문지TC
• /
• 제43권5호
• /
• pp.77-83
• /
• 2006

본 논문에서는 CWDM-PON 기술을 이용하여 일반주택 및 아파트 또는 특정지역 내의 FTTH(Fiber to the Home)에 적합하도록 시스템을 설계, 제작, 특성시험 결과에 대한것이다. 이 시스템은 하나의 광섬유에 384 가입자가 100Mbps의 속도로 인터넷 서비스와 Overlay 방식을 적용하여 CATV를 동시에 수용 받을 수 있다. 가입자의 주거 환경에 따라 유선인 경우 UTP 또는 광섬유로 구축할 수 있으며 무선인 경우에 Wireless LAN을 이용하여 무선 인터넷 서비스도 가능 하도록 하였다. 또한, 미래의 상황에 대비하여 VoIP 서비스를 위한 유무선 솔루션을 구현하였다. 국사와 가입자간의 거리가 20Km이며, 가입자의 데이터 양은 최대 100Mbps, 최소 보장 50Mbps이고 방송과 통신을 하나의 광섬유에 실어 보낸다는 목표로 시스템을 제작하였다. 따라서 광송수신기 모듈, Mux/Demux 등의 구간별 광학적 특성을 조사하였으며 외부환경에 변화에 따른 전송 품질을 측정하였다.

• 대한전자공학회논문지SD
• /
• 제43권2호
• /
• pp.42-50
• /
• 2006

반도체 공정기술의 발달로 인해 칩의 집적도가 향상되고 높은 성능의 SoC (System On a Chip)의 구현이 가능해졌다. 하지만 이로 인한 칩의 전력 소모량 증가는 칩 설계시의 중요 제한 요소가 되고 있다 칩 설계의 하위 단계로 갈수록 설계의 수정은 시간과 금전적 비용을 기하급수적으로 증가시키기 때문에, 설계의 상위 단계에서부터 칩의 소모 전력을 미리 추정하는 기술은 필수적이다. 이에 본 연구에서는 효율적인 상위 레벨 소모 전력 추정을 위해 회로를 레벨화 하고, 일부 레벨의 스위칭을 기반으로 회로의 소모 전력을 look up 테이블을 이용하여 모델링하였다 제안한 기술을 이용하여 ISCAS'85 벤치마크 회로에 대해 평균 소모 전력을 추정한 결과, 기존에 알려진 소모 전력 추정 기술에 비해 평균 추정 오차를 $9.45\%$에서 $3.84\%$로 크게 개선한 결과를 얻을 수 있었다.

• 대한지리학회지
• /
• 제40권1호
• /
• pp.78-95
• /
• 2005

호남 장수지역 경제활동의 산업연계와 혁신네트워크에 대해 분석함으로써 지식정보화 시대의 이상적인 고령사회에 대비한 새로운 지역발전 방향을 모색하고자 하였다. 이를 위해 한국 장수지역 중의 하나인 전라북도의 순창군과 전라남도의 담양군, 곡성군, 구례군 등의 대표적 제조업체를 중심으로 심층 인터뷰를 실시하였다. 연구 결과, 산업 연계에 있어 원료구입과 노동력이용은 해당 군에서 많이 이루어지고 있고, 제조업과 농업 및 관광업간 연계와 인터넷을 이용한 통신판매가 활성화되고 있었다. 그리고 혁신네트워크에 있어서는 지식정보화시대에 가상혁신클러스터의 형성 가능성을 확인할 수 있었다. 따라서 농촌지역 발전을 위해서는 지식기반경제의 지역혁신체계 개념을 이용해 지역의 자원 및 전통지식과 밀접한 혁신네트워크 구축이 필요하다.

• Journal of electromagnetic engineering and science
• /
• 제9권3호
• /
• pp.130-140
• /
• 2009

The design theory and experimental results of a true random noise radar system are presented in this paper. Target range information can be extracted precisely by correlation processing between the delayed reference and the signal received from a target, and the velocity information by the Doppler processing with successive correlation data. A K-band noise radar system was designed using random FM noise signal, and the characteristics of the fabricated system were examined with laboratory and outdoor experiments. A C-band random FM noise signal was generated by applying a low-frequency white Gaussian noise source to VCO(Voltage Controlled Oscillator), and a K-band Tx noise signal with 100 MHz bandwidth was obtained by using a following frequency multiplier. Two modified wave-guide horn arrays were designed and fabricated, and used for the Tx and Rx antennas. The required amount of Tx/Rx isolation was attained by using a coupling cancellation circuit as well as keeping them apart with predetermined spacing. A double down-conversion scheme was used in the Rx and reference channels, respectively, for easy post processing such as correlation and Doppler processing. The implemented noise radar performance was examined with a moving bicycle and a very high-speed target with a velocity of 150 m/s. The results extracted by the Matlab simulation using the logging data were found to be in a reasonable agreement with the expected results.

• 한국의류학회지
• /
• 제30권6호
• /
• pp.851-858
• /
• 2006

The human have constantly pursued the beauty through the history. Especially, the pursuit for the beauty of the human's body means that the subject is at one with the object pursued by Ire subject, which so called as the most active behavior of searching far the beauty. However it sometimes shows that human have tried excessively to search for the beauty of the human's ideal body in the history, and to the degree of hurting the body. For example, the corset was eagerly worn by women with the hope of a satisfied silhouette because the slender waist and the busty bosom were demanded as the woman's ideal body at 18C and 19C(the age of Victorian). The purpose of this study was to investigate the corset fashion in 18C, 19C, one of the most aggressive fashions out of the unreasonable fads, using narcissism that Freud mentioned as inside energy called libido. And the reason why to use the theory of narcissism in this study was that fashion as social outcome is thought to be influenced by the environment but the wearing behavior is considered totally private, it is particularly when focused on the excess ive energy, and the scope was limited to the investigation into the source of the energy binding the own body to hurting. The analysis about this craze of a corset with the view of the theory of narcissism as follows. First, women could mold the ideal concretely in surroundings that ideal woman was constituted just to focus on the appearance, moreover, the mother reinforced the narcissism of their offsprings. Also, the society demanded women to be chaste, and did not allowed for women to reveal libido to the external. As a result of this, libido should be ended up concentrating on ego. With this process, it to be difficult for 'ideal ego' impossible for attainment to transfer to compromising product, ego ideal. That is, women did not think entirely to be out of the question to reach the ideal ego, which meant the energy to tight waists was given women.

• The Korean Journal of Physiology and Pharmacology
• /
• 제15권6호
• /
• pp.345-351
• /
• 2011

High glucose leads to physio/pathological alterations in diabetes patients. We investigated collagen production in human gingival cells that were cultured in high concentrations of glucose. Collagen synthesis and secretion were increased when the cells were exposed to high concentrations of glucose. We examined endoplasmic reticulum (ER) stress response because glucose metabolism is related to ER functional status. An ER stress response including the expression of glucose regulated protein 78 (GRP78), C/EBP homologous protein (CHOP), inositol requiring enzyme alpha (IRE-$1{\alpha}$) and phosphoreukaryotic initiation factor alpha (p-eIF-$2{\alpha}$) was activated in the presence of high glucose. Activating transcription factor 4 (ATF-4), a downstream protein of p-eIF-$2{\alpha}$ as well as a transcription factor for collagen, was also phosphorylated and translocalized into the nucleus. The chemical chaperone 4-PBA inhibited the ER stress response and ATF-4 phosphorylation as well as nuclear translocation. Our results suggest that high concentrations of glucose-induced collagen are linked to ER stress and the associated phosphorylation and nuclear translocation of ATF-4.

• 한국운동역학회지
• /
• 제18권4호
• /
• pp.191-199
• /
• 2008

본 연구는 인라인 롤러스케이트의 가장 단거리인 300m 경기의 스타트 동작 분석을 함으로써, 지도자 및 선수들에게 스타트 기술에 대한 기초적이고 과학적인 자료를 제공하는데 목적이 있다. 연구의 대상은 국가 대표급 남자 선수 5명을 대상으로 3차원 영상분석을 통하여 인라인 롤러스케이트 T300m 종목의 스타트 동작을 분석하여 다음과 같은 결론을 도출하였다. 1)스타트 국면에서의 소요시간에서 P1에서의 시간이 절대적으로 영향을 미치고 있으므로 트레이닝을 통해 하지근력을 강화해야 한다. 2)스타트 속도를 증가시키기 위해서는 상체를 일으켜 세워 달리는 듯한 자세가 되어야 빠른 가속도를 얻을 수 있다. 3)상체의 전경각도는 출발시 뒤다리에 체중을 두고 반작용을 주는 자세에서 조금 세웠다가 첫발(오른발)이 진행되면서 착지할 때는 구부린 자세로 달리는 자세로 글라이딩 해야 한다.