• 제목/요약/키워드: IR thermometer

검색결과 10건 처리시간 0.029초

BaTiO$_3$ 세라믹의 마이크로파 소성 및 전기적 특성 (Microwave Sintering Behavior and Electrical Properties of BaTiO$_3$ Ceramics)

  • 배강;김호기
    • 한국세라믹학회지
    • /
    • 제35권11호
    • /
    • pp.1203-1211
    • /
    • 1998
  • 적외선 광온도계(IR optical thermometer)와 PID 온도조절기에 의해 소성온도와 시간을 정밀하게 조절할 수 있는 마이크로파 소성장치를 사용하여 BaTiO3 시편을 소성하였다. 또한 마이크로파 소성중에 광섬유 온도계(optical fiber thermoneter)로 시편의 내부온도를 측정하여 같은 조건에서의 일반소성에 의한 시편과 소성특성을 비교한 결과, 소성시간에 따른 빠른 입성장속도과 큰 결정립경을 가졌으며, 온도에 따른 유전성질의 변화는 20~16$0^{\circ}C$의 측정범위에서 같은 경향을 보였다.

  • PDF

치과용 고주파 주조기를 이용한 Co-Cr-Mo계 합금 용해과정의 적외선 열화상 분석 (Analysis of infrared thermal image for melting processes of Co-Cr-Mo based alloy using high frequency induction casting machine)

  • 강후원;박영식;황인;이창호;허용;원용관
    • 대한치과기공학회지
    • /
    • 제36권3호
    • /
    • pp.149-158
    • /
    • 2014
  • Purpose: Dental casting Co-Cr-Mo based alloys of five kinds of ingot type and two kinds of shot type were analyzed the melting processes with heating time of high frequency induction centrifugal casting machine using infrared thermal image analyzer. Methods: When Co-Cr-Mo based alloys were put about 30g/charge in the ceramic crucible of high frequency induction centrifugal casting machine and heat, Infrared thermal image analyzer and IR thermometer indicated these alloys in the crucible were set and operated. Results: The melting temperatures of alloys measuring infrared thermal image analyzer were deviated ${\pm}10^{\circ}C$ compared to those of manufacturing company. On the other hand, the melting time of alloys were differently appeared with the shape of alloys(ingot and shot type). Conclusion: The melting temperatures of dental Co-Cr-Mo based alloys were measured the degree of $1,360{\sim}1410^{\circ}C$ and the heating time with the alloys of ingot and shot type were deviated ${\pm}10sec$.

영상센서의 비균일 응답특성 보정을 위한 흑체 설계 및 성능검증과 보정오차 분석 (Black Body Design and Verification for Non-Uniformity Correction of Imaging Sensor and Uncertainty Analysis)

  • 신소민
    • 한국항공우주학회지
    • /
    • 제41권3호
    • /
    • pp.240-245
    • /
    • 2013
  • 영상센서 중 적외선 센서는 시간경과 및 작동/비작동 반복에 따라 적외선 광원에 대한 응답특성이 조금씩 변화하며, 그 결과 영상품질이 저하된다. 그래서 인공위성에 탑재되는 적외선 센서의 경우 정상적인 임무수행을 위해 교정용 흑체로 주기적인 비균일 응답특성 보정을 실시할 수 있도록 해야 한다. 본 논문에서는 비균일 응답특성 보정을 위해, 적외선 센서의 파장대역 $3.3{\sim}5.2{\mu}m$에서 흑체 방사율이 0.995이상 평균온도차 $1^{\circ}C$ 이하가 되도록 V-그루브(groove) 타입의 흑체를 설계하였다. 성능검증을 위해 흑체의 방사율과 표면온도를 측정하여 검증하였으며, 그 결과로부터 비균일 응답특성 보정오차를 산출하였다.

IR CHARACTERISTICS OF MOLECULAR CLOUDS IN THE REGION OF SUPERSHELL GS234-02

  • JUNG JAE HOON;LEE JUNG KYU;YOON TAE SEOG
    • 천문학회지
    • /
    • 제30권1호
    • /
    • pp.71-81
    • /
    • 1997
  • We have studied the IR properties of molecular clouds in the region of the supershell GS234-02 using IRAS and COBE data. The mean values of dust color temperature and optical depth at $240{\mu}m$ are derived to be $15.4\pm1.5K\; and\;9.0\pm5.7\times10^{-4}$, respectively, which agree well with those determined by Sodroski et al.(1994) for the outer Galaxy. Mean IRAS colors, $R_{12}/100= 0.074,\; R_{25}/100= 0.052,\; R_{60/100}= 0.219$, indicate that the abundance of PAHs is enhanced but other particles are nearly the same as those of the solar neighborhood. We found the anticorrelation between $R_{100/140}\;and\;R_{140/240}$. It cannot be explained by the thermal emission of traditional big grains. The anticorrelation implies that, at high ISRF, $T_{100/140}$ underestimates the equilibrium temperature, while $T_{140/240}$ overestimates it and, at low ISRF, vice versa. Therefore we propose to use the intensity ratio, $R_{100/240}$ as a dust thermometer.

  • PDF

Ion Flux Assisted PECVD of SiON Films Using Plasma Parameters and Their Characterization of High Rate Deposition and Barrier Properties

  • Lee, Joon-S.;Jin, Su-B.;Choi, Yoon-S.;Choi, In-S.;Han, Jeon-G.
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
    • /
    • pp.236-236
    • /
    • 2011
  • Silicon oxynitride (SiON) was deposited for gas barrier film on polyethylene terephthalate (PET) using octamethylycyclodisiloxane (Si4O4C8H24, OMCTS) precursor by plasma enhanced chemical vapor deposition (PECVD) at low temperature. The ion flux and substrate temperature were measured by oscilloscope and thermometer. The chemical bonding structure and barrier property of films were characterized by Fourier transform infrared (FT-IR) spectroscopy and the water vapor transmission rate (WVTR), respectively. The deposition rate of films increases with RF bias and nitrogen dilution due to increase of dissociated precursor and nitrogen ion incident to the substrate. In addition, we confirmed that the increase of nitrogen dilution and RF bias reduced WVTR of films. Because, on the basis of FT-IR analysis, the increase of the nitrogen gas flow rate and RF bias caused the increase of the C=N stretching vibration resulting in the decrease of macro and nano defects.

  • PDF

전치 증폭기 공유 기법을 이용한 8-bit 10-MSample/s Folding & Interpolation ADC (A 8-bit 10-MSample/s Folding & Interpolation ADC using Preamplifier Sharing Method)

  • 안철민;김영식
    • 전기전자학회논문지
    • /
    • 제17권3호
    • /
    • pp.275-283
    • /
    • 2013
  • 본 논문에서는 8bit 10Ms/s CMOS Folding and Interpolation ADC를 제안한다. 회로에 사용한 구조는 FR(Folding Rate)이 3, NFB(Number of Folding Block)가 4, IR(Interpolation rate)이 8이며, 제안된 전치 증폭기(Preamplifier) 공유 기법을 회로에 사용하여 같은 구조에서 요구하는 전치 증폭기 수를 절반으로 줄여서 전력소모와 유효면적을 줄이도록 설계하였다. 제안된 ADC는 0.35[um] CMOS 디지털 공정을 사용하여 제작하였고, 유효칩 면적은 3.8[$mm^2$] ($1.8[mm]{\times}2.11[mm]$) 이고, 3.3[V], 샘플링 주파수 10[MHz]에서 20[mA]의 DC 전류소모를 나타내었다. INL은 -0.57, +0.61 [LSB], DNL은 -0.4, +0.51 [LSB]으로 측정되었고, 주파수 100[kHz] 정현파 입력신호에서 SFDR은 48.9[dB], SNDR은 47.9[dB](ENOB 7.6b)로 측정되었다.

화염가수분해 증착 공정에서 기판온도의 변화에 따른 다성분 입자의 부착 및 소결특성에 관한 연구 (Effect of Substrate Temperature on Multi-component Particle Deposition and Consolidation in Flame Hydrolysis Deposition)

  • 신형수;백종갑;최만수
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2000년도 춘계학술대회논문집B
    • /
    • pp.428-433
    • /
    • 2000
  • The consolidation behavior of multicomponent particles prepared by the flame hydrolysis deposition process is examined to identify the effects of Si substrate temperature. To fabricate multi-component particles, a vapor-phase ternary mixture of $SiCl_4(100 cc/min),\;BCl_3(30cc/min)\;and\;POCl_3,(5cc/min)$ was fed into a coflow diffusion oxy-hydrogen flame burner. The doped silica soot bodies were deposited on silicon substrates under various deposition conditions. The surface temperature of the substrate was measured by an infrared thermometer. Changes in the chemical states of the doped silica soot bodies were examined by FT-IR(Fourier-transformed infrared spectroscopy). The deposited particles on the substrate were heated at $1300^{\circ}C$ for 3h in a furnace at a heating rate of 10K/min. Si-O-B bending peak has been found when surface temperature exceeds $720^{\circ}C$. Correspondingly, the case with substrate temperatures above loot produced good consolidation result.

  • PDF

Heat-stress 온도 적용이 교감신경활동에 미치는 영향 (Influence of Heat Stress Temperature on Sympathetic Nerve Activities)

  • 임영은;양은영;김태열
    • 대한임상전기생리학회지
    • /
    • 제5권2호
    • /
    • pp.11-21
    • /
    • 2007
  • The purpose of this study were to investigate influence of heat stress temperature on sympathetic nerve activities. Subjects were 8 normal adults (4 men, 4 women, 21.36 years old). First sympathetic nerve activities were measured at the point that increase of core temperature stops at the state of applying normal thermic temperature (NIT; $34^{\circ}C$). After measurement, temperature of bathtub was increased to heat stress temperature (HST; $46^{\circ}C$) and sympathetic nerve activities were remeasured at the point that temperature increase stops. Sympathetic skin response (SSR) were analyzed using EMG, IR thermometer, and auto stethoscope. SSR latency showed significant differences at both palms by electrical stimulation to median nerve (p<.05). Electrical stimulation to forehead showed significant difference at left palm (p<.05) and electrical stimulation to navel showed significant difference at right palm (p<.05). Median nerve in changes of SSR amplitude showed significant differences at both palms in HST (p<.01). Electrical stimulation to navel showed significant difference at left palm (p<.05). Ts of forehead and xiphoid process showed significant differences (p<0.01). Tc of oral (p<0.05) and inner ear (p<0.01) showed significant differences. Pulse rate showed significant difference (<0.05). This study showed that immersion in HST had significant decrease of excitability in sympathetic nervous system compared to immersion in NTT.

  • PDF

비접촉센서를 이용한 Inconel 718 밀링가공에서 공구상태 감시 (Tool Condition Monitoring with Non-contacting Sensors in Inconel 718 Milling Processes)

  • 최용기;황문창;김영준;박강휘;구준영;김정석
    • 한국생산제조학회지
    • /
    • 제25권6호
    • /
    • pp.445-451
    • /
    • 2016
  • The Inconel 718 alloy is a well-known super-heat-resistant alloy and a difficult-to-cut material. Inconel 718 with excellent corrosion and heat resistance is used in harsh environments. However, the heat generated is not released owing to excellent physical properties, making processes (e.g., adhesion and thermal fatigue) difficult. Tool condition monitoring in machining is significant in reducing manufacturing costs. The cutting tool is easily broken and worn because of the material properties of Inconel 718. Therefore, tool management is required to improve tool life and machinability. This study proposes a method of predicting the tool wear with non-contacting sensors (e.g., IR thermometer for measuring the cutting temperature and a microphone for measuring the sound pressure level in machining). The cutting temperature and sound pressure fluctuation according to the tool condition and cutting force are analyzed using experimental data. This experiment verifies the effectiveness of the non-contact measurement signals in tool condition monitoring.

적외선열화상장치를 이용한 Buchanan plugger 표면의 온도상승 분석 (INFRARED THERMOGRAPHIC ANALYSIS OF TEMPERATURE RISE ON THE SURFACE OF BUCHANAN PLUGGER)

  • 최성아;김선호;황윤찬;윤창;오병주;최보영;정우남;정선와;황인남;오원남
    • Restorative Dentistry and Endodontics
    • /
    • 제27권4호
    • /
    • pp.370-381
    • /
    • 2002
  • This study was performed to evaluate the temperature rise on various position of the Buchanan plugger, the peak temperature of plugger's type and the temperature change by its touching time of heat control spling. The heat carrier system 'System B' (Model 1005, Analytic Technologies, USA) and the Buchanan's plug-gers of F, FM, M and ML sizes are used for this study. The temperature was set to 20$0^{\circ}C$ which Dr. Buchanan's "continuous wave of condensation" technique recommended on digital display and the power level on it was set to 10. In order to apply heat on the Buchanan's pluggers, the heat control spring was touched for 1, 2, 3, 4 and 5 seconds respectively. The temperature rise on the surface of the pluggers were measured at 0.5 mm intervals from tip to 20 mm length of shank using the infrared thermography (Radiation Thermometer-IR Temper, NEC San-ei Instruments, Ltd, Japan) and TH31-702 Data capture software program (NEC San-ei Instruments, Ltd, Japan). Data were analyzed using a one way ANOVA followed by Duncan's multiple range test and linear regression test. The results as follows. 1. The position at which temperature peaked was approximately at 0.5 mm to 1.5 mm far from the tip of Buchanan's pluggers (p<0.001). The temperature was constantly decreased toward the shank from the tip of it (p<0.001). 2. When the pluggerss were heated over 5 seconds, the peak temperature by time of measurement revealed from 253.3$\pm$10.5$^{\circ}C$ to 192.1$\pm$3.3$^{\circ}C$ in a touch for 1 sec, from 218.6$\pm$5.$0^{\circ}C$ to 179.5$\pm$4.2$^{\circ}C$ in a touch for 2 sec, from 197.5$\pm$3.$0^{\circ}C$ to 167.5$\pm$3.7$^{\circ}C$ in a touch for 3 sec, from 183.7$\pm$2.5$^{\circ}C$ to 159.8$\pm$3.6$^{\circ}C$ in a touch for 4 sec and from 164.9$\pm$2.$0^{\circ}C$ to 158.4$\pm$1.8$^{\circ}C$ in a touch for 5 sec. A touch for 1 sec showed the highest peak temperature, followed by, in descending order, 2 sec, 3 sec, 4 sec. A touch for 5 sec showed the lowest peak temperature (p<0.001). 3. A each type of pluggers showed different peak temperatures. The peak temperature was the highest in F type and followed by, in descending order, M type, ML type. FM type revealed the lowest peak temperature (p<0.001). The results of this study indicated that pluggers are designed to concentrate heat at around its tip, its actual temperature does not correlate well with the temperature which Buchanan's "continuous wave of condensation" technique recommend, and finally a quick touch of heat control spring for 1sec reveals the highest temperature rise.