• 센서학회지
• /
• 제26권2호
• /
• pp.91-95
• /
• 2017

Recently, infrared (IR) spectrometers have been required in various fields such as environment, safety, mobile, automotive, and military. This IR dispersive sensor detection method of substances is widely used. In this study, we fabricated a silicon (Si) prism-based near infrared (NIR) spectrometer utilizing micro electro mechanical system (MEMS) technology. Si prism-based NIR spectrometer utilizing MEMS technology consists of upper, middle, and lower substrates. The upper substrate passes through the incident IR ray selectively. The middle substrate, acting as a prism, disperses and separates the incident IR beam. The lower substrate has an amorphous Si (a-Si)-based bolometer array to detect the IR spectrum. The fabricated Si prism-based NIR spectrometer utilizing MEMS technology has the advantage of a simple structure, easy fabrication steps, and a wide NIR region operating range.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.215-218
• /
• 2001

A flame detector responds either to radiant energy visible to the human eye or outside the range of human vision. Such a detector is sensitive to glowing embers, coals, or flames which radiate energy of sufficient intensity and spectral quality to actuate the alarm. An infra-red detectors can respond to the total IR component of the flame alone or in combination with flame flicker in the frequency range of 5 to 30 Hz. A major problem in the use of infrared detectors receiving total IR radiation is the possible interference of solar radiation in the infrared region. When detectors are located in places shielded from the sun, such as vaults. filtering or shielding the unit from the sun's rays is unnecessary. In this study, we proposed method for redue a false alarm with using filtering & sensor technology for distinguish of causes of raise a false alarm and pure flame.

• 한국멀티미디어학회논문지
• /
• 제15권7호
• /
• pp.870-878
• /
• 2012

최근의 많은 컴퓨터 기술의 발전과 센서 기술의 발전의 결합으로 매우 다양한 형태의 사용자 경험에 기반한 사용자 인터페이스(User interface) 기술들이 출현하고 있다. 본 연구에서는 적외선 영상을 이용한 스마트 터치 프로젝터 시스템 기술에 관한 연구와 그 결과를 소개한다. 제안된 시스템에서는 사용자가 빔 프로젝터를 사용할 때 적외선 펜을 이용하여 이벤트를 발생시키면 적외선 영상센서를 통하여 그 이벤트를 인식하여 마우스 이벤트를 발생시키는 기법을 제안한다. 입력되는 펜의 움직임 추출과 추적을 기반으로 움직임 이벤트 패턴을 설계하였으며, 입력 영상 화면과 실제 사용하는 하드웨어의 해상도에 차이가 있기 때문에 이 오차를 최소화 하기 위해서 화면 좌표보정 알고리즘을 제안한다. 이러한 기술은 빔 프로젝터에 간단한 프로세서만 장착이 된다면 다른 이동식 노트북 등이 필요 없이 언제든지 회의나 발표 등을 진행할 수 있는 차세대 휴먼-컴퓨터 상호작용(Human-Computer Interaction) 기술이다.

• 제어로봇시스템학회논문지
• /
• 제15권8호
• /
• pp.831-838
• /
• 2009

This paper proposes an IR (infrared) LED (Light Emitting Diode)-based tactile fingertip sensor that can independently measure the normal and tangential force between the hand and an object. The proposed IR LED-based tactile sensor has several advantages over other technologies, including a low price, small size, and good sensitivity. The design of the first prototype is described and some experiments are conducted to show output characteristics of the proposed sensor. Furthemore, the effectiveness of the proposed sensor is demonstrated through anti-slip control in a multifunction myoelectric hand, called the KNU Hand, which includes several novel mechanisms for improved grasping capabilities. The experimental results show that slippage was avoided by simple force control using feedback on the normal and tangential force from the proposed sensor. Thus, grasping force control was achieved without any slippage or damage to the object.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제54권5호
• /
• pp.232-237
• /
• 2005

In this paper, we fabricated $CO_2$ gas sensor based on the MEMS infrared sensor and characterized its electrical and $CO_2$-sensing properties. The fabricated $CO_2$ gas sensor by MEMS technique has many advanges over NDIR(nondispersive) $CO_2$ sensor such as monolithic fabrication, very high selectivity on $CO_2$, low power consumption and compact system. Microbolometer by surface micromachining was fabricated for gas detector and $CO_2$ filter chip by bulk micromachining was fabricated for signal referencing. By using the proposed and fabricated gas sensor, we are expected to measure $CO_2$ concentration more accurately with high reliability.

• 한국전자통신학회논문지
• /
• 제18권4호
• /
• pp.669-676
• /
• 2023

본 논문에서는 IR 레이저 센서 및 관성 센서를 이용한 골프 퍼팅 거리 측정을 위한 다목적 골프 퍼팅 거리 측정기를 설계, 제작하였다. 거리 측정기는 골프 퍼팅 거리 측정을 위해 실외 50m 측정 범위 내에서 거리 측정과 경사도 측정, 그리고 퍼팅에 영향을 미치는 온도 측정이 가능하도록 설계하였다. 또한, 실내 30m 측정범위 내에서 길이 및 수평도를 측정함으로써 실내 작업을 지원하며, 실내 온도 이상시 웹서버와의 연동을 통해 휴대폰 사용자에 경보를 제공함으로써 실내 또는 차량 화재로부터 안전이 확보될 수 있도록 하였다. 제안된 방법의 정확성과 스마트 폰과의 연동 성능을 평가하기 위해 하나의 시작품을 제작하고 웹서버를 구축하였으며, 반복적인 실험에서 허용 가능한 5%내의 오차율을 보임으로써 유용성을 확인할 수 있었다.

• 인터넷정보학회논문지
• /
• 제14권2호
• /
• pp.45-51
• /
• 2013

본 논문에서는 자외선(UV, ultraviolet) 및 적외선(IR, infrared) 센서를 결합함으로서 불이 연소하면서 방출하는 빛의 파장을 활용한 영상신호를 검출하는 결합형 불꽃영상 검출시스템은 적외선 센서와 자외선 센서 기반의 신호처리 알고리즘 설계방안을 제안한다. 또한, 설계한 듀얼모드인 결합형 불꽃영상 검출시스템은 단독형 적외선 또는 자외선 센서 기반의 영상검출 알고리즘의 검출 성능결과를 비교한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1729-1730
• /
• 2008

In the industry, the automation of brazing system is very important using the vision senor and the edge detection of the bronze pipe. And also, the accurate coordination is needed for the finding of the precise location. In this paper, we propose an algorithm for the measurement of 3D information of the brazing material and the detection algorithm of soldering area using the camera and IR sensor. We use Canny edge detector in noisy environments. The experimental study shows that camera and IR sensor is useful for the measurement of distance in the brazing work.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.491-491
• /
• 2011

Transparent and flexible electronic devices that are light-weight, unbreakable, low power consumption, optically transparent, and mechanical flexible possibly have great potential in new applications of digital gadgets. Potential applications include transparent displays, heads-up display, sensor, and artificial skin. Recent reports on transparent and flexible field-effect transistors (tf-FETs) have focused on improving mechanical properties, optical transmittance, and performances. Most of tf-FET devices were fabricated with transparent oxide semiconductors which mechanical flexibility is limited. And, there have been no reports of transparent and flexible all-organic tf-FETs fabricated with organic semiconductor channel, gate dielectric, gate electrode, source/drain electrode, and encapsulation for sensor applications. We present the first demonstration of transparent, flexible all-organic sensor based on multifunctional organic FETs with organic semiconductor channel, gate dielectric, and electrodes having a capability of sensing infrared (IR) radiation and mechanical strain. The key component of our device design is to integrate the poly(vinylidene fluoride-triflouroethylene) (P(VDF-TrFE) co-polymer directly into transparent and flexible OFETs as a multi-functional dielectric layer, which has both piezoelectric and pyroelectric properties. The P(VDF-TrFE) co-polumer gate dielectric has a high sensitivity to the wavelength regime over 800 nm. In particular, wavelength variations of P(VDF-TrFE) molecules coincide with wavelength range of IR radiation from human body (7000 nm ~14000 nm) so that the devices are highly sensitive with IR radiation of human body. Devices were examined by measuring IR light response at different powers. After that, we continued to measure IR response under various bending radius. AC (alternating current) gate biasing method was used to separate the response of direct pyroelectric gate dielectric and other electrical parameters such as mobility, capacitance, and contact resistance. Experiment results demonstrate that the tf-OTFT with high sensitivity to IR radiation can be applied for IR sensors.

• 센서학회지
• /
• 제17권4호
• /
• pp.250-255
• /
• 2008

A vanadium pentoxide ($V_2O_5$)-based bolometric infrared (IR) sensor has been designed and fabricated using micro electro mechanical systems (MEMS) technology for glucose detection and its resistive characteristics has been illustrated. The proposed bolometric infrared sensor is composed of the vanadium pentoxide array that shows superior temperature coefficient of resistance (TCR) and standard silicon micromachining compatibility. In order to achieve the best performance, deposited $V_2O_5$ thin film is optimized by adequate rapid thermal annealing (RTA) process. Annealed vanadium oxide thin film has demonstrated a linear characteristic and relatively high TCR value (${-4}%/^{\circ}C$). The resistance of vanadium oxide is changed by IR intensity based on glucose concentration.