• 설비공학논문집
• /
• 제16권10호
• /
• pp.889-894
• /
• 2004

Infrared (IR) detectors are widely used for many applications, such as temperature measurement, intruder and fire detection, robotics and industrial equipment, thermoelstic stress analysis, medical diagnostics, and chemical analysis. Quantum detectors commonly need to be refrigerated below 80 K, and thus a cooling system should be equipped together with the detector system. The cooling load, which should be removed by the cooling system to maintain the nominal operating temperature of the detector, critically depends on the insulation efficiency of the cryochamber housing the detector. Thermal analysis of cryochamber includes the conduction heat transfer through a cold well, the gases conduction and gas outgassing, as well as radiation heat transfer, The transient cooling characteristics of an infrared detector cryochamber are investigated experimentally in the present study. The transient cooling load increases as the gas pressure is increased. Gas pressure becomes significant as the cooling process proceeds. Cool down time is also increased as the gas pressure is increased. It is also found that natural convection effects on cool down time become significant when the gas pressure is increased.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.209-212
• /
• 2001

A flame detector responds either to radiant energy visible to the human eye or outside the range of human vision. Such a detector is sensitive to glowing embers, coals, or flames which radiate energy of sufficient intensity and spectral quality to actuate the alarm. An infra-red detectors can respond to the total IR component of the flame alone or in combination with flame flicker in the frequency range of 5 to 30 Hz. A major problem in the use of infrared detectors receiving total IR radiation is the possible interference of solar radiation in the infrared region. When detectors are located in places shielded from the sun, such as vaults, filtering or shielding the unit from the sun's rays is unnecessary. In this study, we proposed method for redue a false alarm with using filtering & sensor technology for distinguish of causes of raise a false alarm and pure flame.

• 전자공학회논문지SC
• /
• 제37권3호
• /
• pp.63-71
• /
• 2000

모든 물체에서 방출되는 적외선을 감지하여 영상신호로 만들어 주는 적외선 감지 칩은 보편적으로 적외선감지 소자와 신호 취득 회로가 각기 다른 칩으로 제작되어 하이브리드 본딩 기법을 통해 만들어 진다. 본 논문에서는 신호 취득 회로의 설계 과정과 시뮬레이션 결과를 보여 주며, 실제 제작 결과, 6V의 인가 전압에서 설계 사양에 만족하는 동작 특성을 보임을 확인하였다. 제작된 신호 취득 회로를 이용하여 적외선 감지칩을 제작하고 이를 자체 제작한 열영상 시스템에 장착하여 열영상을 구현해 보았다. 얻어진 열영상은 고온과 상온의 물체에 대해서 인식이 가능한 수준이었으며, 열영상 시스템의 잡음 특성을 좀 더 개선할 경우 더나은 열영상을 얻을 수 있으리라 기대한다.

• 천문학논총
• /
• 제32권1호
• /
• pp.355-357
• /
• 2017

For future space IR missions, such as SPICA, it is crucial to establish an experimental method for evaluating the performance of mid-IR detectors. In particular, the wavelength dependence of the sensitivity is important but difficult to be measured properly. We are now preparing a testing system for mid-IR Si:As/Si:Sb detectors on SPICA. We have designed a cryogenic optical system in which IR signal light from a pinhole is collimated, passed through an optical filter, and focused onto a detector. With this system, we can measure the photoresponse of the detector for various IR light using optical filters with different wavelength properties. We have fabricated aluminum mirrors which are adopted to minimize thermal distortion effects and evaluated the surface figure errors. The total wavefront error of the optical system is $1.3{\mu}m$ RMS, which is small enough for the target wavelengths ($20-37{\mu}m$) of SPICA. The point spread function measured at a room temperature is consistent with that predicted by the simulation. We report the optical performance of the system at cryogenic temperatures.

• 한국정보통신학회논문지
• /
• 제18권11호
• /
• pp.2759-2764
• /
• 2014

화재감지 시간을 단축하기 위해서 연기감지기가 활용되는 추세이며, 발신기와 수신기가 100m이상 이격되어 설치되는 구조의 연기감지기는 외부환경의 영향으로 인한 발신기의 각도변화에 따라 수광부 레이저 포인트 위치가 매우 민감하게 변화한다. 본 논문에서는 레이저 발신기와 수신기 간의 원거리 설치에 따른 레이저 초점 설정의 어려움을 해결하고 외부 환경에 따른 초점 정합의 문제를 해결하기 위해서 다중 웜기어를 활용한 고정밀 제어장치와 레이저 광선의 틀어진 각도를 조정 할 수 있는 자동초점 정합 알고리즘을 제시한다.

• 설비공학논문집
• /
• 제18권8호
• /
• pp.672-677
• /
• 2006

The steady cooling characteristics of a cryochamber for infrared (IR) detector have been investigated analytically, considering radiation shields. The thermal modeling considers the conduction heat transfer through cold finger, the gaseous conduction due to out-gassing, and the radiation heat transfer. The cooling load of the cryochamber is obtained by using a fin equation. The results obtained indicate that the gaseous conduction plays an important role in determining the steady cooling load. The steady cooling load is increased as the gas pressure is increased. It is also found that the cooling load is substantially decreased with a radiation shield. The most thermal load of a cryochamber occurs through the cold finger.

• 센서학회지
• /
• 제18권2호
• /
• pp.135-138
• /
• 2009

$64{\times}1$ forcal plane infrared detector has been fabricated by using HgCdTe epi layer. HgCdTe was grown on GaAs substrate by using metal organic chemical vapor deposition. This paper describes key developments in the epi layer growth and device fabrication process. The performance of IR imaging system is summarized.

• 설비공학논문집
• /
• 제10권6호
• /
• pp.795-802
• /
• 1998

For measuring the thermal diffusivity by laser flash method, raw data have to be calibrated using temperature data. We have developed in-process calibration method and polynomial calibration in which thermal diffusivity can be calibrated during measuring, This method is different from existing temperature pre-process calibration method and exponential calibration having various source of error. Using this new calibration method, measurement accuracy was improved about 1∼2% compare to the value by the existing method. We also studied more accurate fitting curve as in Figure 4 was shown the result of measuring output characteristics of IR radiometer with temperature. As illustrated in data, in-process calibration method and polynomial calibration equation is proper than pre-process calibration method and exponential calibration.

• 방재기술
• /
• 통권18호
• /
• pp.5-16
• /
• 1995

The capacity commonly required sensors includes capability of quickly and properly catching the conditions of a fire and discriminating other factors such as noise, interference, etc. IR flame detector which react to the infra-red rays emitted from the flame. This study is aimed to know the characteristic repond to the specified fire plate. Experiment is acted by manufacture's technical data that is explained relation of detective range and sensitivity.

• 한국전자파학회논문지
• /
• 제20권7호
• /
• pp.657-663
• /
• 2009

본 논문에서는 IR-UWB 통신에 적합한 저전력, 저복잡도의 CMOS RF 수신기를 제작하였다. 제안된 IR-UWB 수신기는 비교적 구조가 간단한 non-coherent demodulation 방식으로 설계, 제작되었다. 설계된 IR-UWB 수신기는 single-ended 2-stage LNA, S2D, envelop detector, VGA, comparator로 구성되어 있으며, 0.18 ${\mu}m$ CMOS 공정 기술을 이용하여 단일 칩으로 설계, 제작하였다. 측정 결과 data rate이 1 Mbps 일 때 BER값이 $10^{-3}$ 조건에서 sensitivity는 -80.8 dBm이다. 제작된 단일 칩 CMOS IR-UWB 수신기의 전류 소모는 전압이 1.8 V 일 때, 13 mA이며 23.4 nJ/bit 의 성능을 갖는다.