• The Journal of Korean Academy of Prosthodontics
• /
• v.42 no.5
• /
• pp.489-500
• /
• 2004

Statement of problem: The use of zirconia prostheses fabricated with CAD/CAM system is on an increasing trend in dentistry. However, evaluation of the fit related to internal relief and marginal reproducibility of zirconia has not been reported. Purpose : This study was to evaluate the fit related to internal relief and marginal reproducibility of zirconia core fabricated with CAD/CAM system. Materials and methods: The evaluation was based on 30 zirconia cores and 5 IPS-Empress2 cores. Zirconia cores were fabricated in different conditions of internal relief(0, 10, 20, 30, 40 and $50{\mu}m$), and IPS-Empress2 cores were fabricated in accordance with the manufacturer's instructions. Before cementation, the marginal discrepancies or cores were measured on metal die. And then, each core was cemented to stone die, embedded in an acrylic resin and sectioned in two planes(mesiodistally and labiopalatally). The internal gaps were measured at the margin and axial surface. Measurements for the marginal discrepancies, the internal marginal gaps and the internal axial gaps were performed under a measuring microscope(Compact measuring microscope STM5; Olympus, Japan) at a magnification of ${\times}100$. In addition, the marginal conagurations of metal die, zirconia core and IPS-Empress2 core were examined with SEM(S-2700, Hitachi, Japan). Results : Within the limits of this study the results were as follows. 1. Compared with IPS-Empress2 cores, the marginal discrepancies of zirconia cores had no significant differences. the internal marginal gaps were statistically smaller and the internal axial gaps were statistically larger in each condition of internal relief. 2. The marginal discrepancies and the internal marginal gaps of zirconia cores had no significant differences related to the conditions of internal relief(P>0.05). 3. The internal axial gaps of zirconia cores with $0{\sim}20{\mu}$m for internal relief were significantly larger than that with $50{\mu}m$ (P<(0.0001). 4. SEM micrographs showed favorable marginal reproducibility of zirconia core and smooth texture on the milling surface. Conclusion: The marginal discrepancy and the internal gaps of zirconia core were clinically acceptable and the milling surface was showed smooth texture. For fabrication of the durable esthetic restoration, further investigations on complex design of core, milling accuracy, compatability of enamel porcelain and porcelain firing seems to be needed.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.48 no.3
• /
• pp.76-81
• /
• 2011

Intrusion prevention systems (IPS) are important solution about solved problems for inside system security or outsider attacks. When introduce this system, first consideration item is secured rather than multiple function. Colored Petri Nets (CPNs) used that in order to secured verification for user authentication function of intrusion prevention system security model. CPNs is a graphical modeling language suitable for modeling distributed, concurrent, deterministic or non-deterministic systems with synchronous. Like these CPNs was expressed every possible state and occurrence graph. Secured of IPS security model was verified because expression every state using CPN tool and as a result of analyzing the occurrence graph was without a loop or interruption.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03b
• /
• pp.444-447
• /
• 2008

A nuclear fuel test loop (after below, FTL) is installed in IR1 of an irradiation hole in HANARO for testing neutron irradiation characteristics and thermo hydraulic characteristics of a fuel loaded in a light water power reactor (PWR) or a heavy water power reactor (CANDU). There is an in-pile section (IPS) and an out-pile section (OPS) in this test loop. When HANARO is normally operated, the fuel loaded in the IPS has a nuclear reaction heat generated by a neutron irradiation. To remove the generated heat and to maintain an operation condition of the test fuel, a main cooling water system (MCWS) is installed in the OPS of the FTL. The pump can not continuously suck a fluid and not pressurize the fluid during a cold function test. To verify the flow characteristics of the MCWS, a flow net work analysis has been conducted. When the higher elevation pipelines wholly filled with coolant, it was confirmed through the analysis results that the pump pressurized the coolant normally. And the analysis results described the system characteristics with operation temperature and pressure variation satisfactorily.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.17 no.1
• /
• pp.25-30
• /
• 2024

Smart City, a key application area of the AIoT (Artificial Intelligence of Things), provides various services in safety, security, and healthcare sectors through location tracking and location-based services. an IPS (Indoor Positioning System) is required to implement location-based services, and wireless communication technologies such as WiFi, UWB (Ultra-wideband), and BLE (Bluetooth Low Energy) are being applied. BLE, which enables data transmission and reception with low power consumption, can be applied to various IoT devices such as sensors and beacons at a low cost, making it one of the most suitable wireless communication technologies for indoor positioning. BLE utilizes the RSSI (Received Signal Strength Indicator) to estimate the distance, but due to the influence of multipath fading, which causes variations in signal strength, it results in an error of several meters. In this paper, we conducted research on a path loss model that can be applied to BLE IPS for proximity services, and confirmed that optimizing the free space propagation loss coefficient can reduce the distance error between the Tx and Rx devices.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.1484-1486
• /
• 2005

To achieve the high reliability performance in IPS cell, finding a good combination of Liquid Crystal (LC) materials and Polyimide (PI) is very important as they play a key role in IPS cell. Several LC materials and PIs have been introduced for preparation of their different combinations. Electro optical characteristics such as voltage holding ratio, residual DC and AC image sticking have been investigated for the different system of the LC material and PI in the test panels in an attempt to find the effects on the display reliability performance and image sticking.1)3)

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2021.01a
• /
• pp.79-80
• /
• 2021

본 논문은 MITM 공격기법을 역이용한 네트워크 보안 기술 및 구현 방안을 제시한다. MITM(Man In The Middle) 공격은 통신 경로 중간에 개입하여 양 단간의 통신 내용을 가로채거나 행위 제어를 수행하는 전통적인 해킹 방법으로 그 공격 기법을 역이용하여 네트워크 공격을 방어하는 보안기술 및 시스템 구현에 대해 기술한다. Linux 시스템을 이용하여 ARP Poisoning을 통해 양단간 통신 트래픽에 개입하며, Netfilter 및 Suricata를 이용하여 Network IDS/IPS 및 Firewall을 구현하였고, Contents 필터링 및 Anti-Virus 구현이 가능하며, 여러 기능을 확장하여 UTM(Unified Threats Management) 시스템을 구현하였다.

• The KIPS Transactions:PartC
• /
• v.14C no.3 s.113
• /
• pp.209-220
• /
• 2007

IPS(Intrusion Prevention Systems), which is installed in inline mode in a network, protects network from outside attacks by inspecting the incoming/outgoing packets and sessions, and dropping the packet or closing the sessions if an attack is detected in the packet. In the signature based filtering, the payload of a packet passing through IPS is matched with some attack patterns called signatures and dropped if matched. As the number of signatures increases, the time required for the pattern matching for a packet increases accordingly so that it becomes difficult to develop a high performance US working without packet delay. In this paper, we propose a high performance IPS based on signature hashing to make the pattern matching time independent of the number of signatures. We implemented the proposed scheme in a Linux kernel module in a PC and tested it using worm generator, packet generator and network performance measure instrument called smart bit. Experimental results show that the performance of existing method is degraded as the number of signatures increases whereas the performance of the proposed scheme is not degraded.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.3
• /
• pp.335-341
• /
• 2020

This study examined the shear bond strength between the zirconia core and pressed lithium disilicate veneering ceramics. The Schmitz-Schulmeyer test method was used to investigate the core-veneer shear bond strength of industrially manufactured zirconia core ceramic (Zirtooth, HASS, Gangneung, Korea) and pressed veneer ceramic (IPS e.max Zirpress, Vita PM9, GC Initial IQ, HASS Rosetta SM) (N=40). Data were statistically analyzed using one-way ANOVA and Tukey's test (a=0.05). The fractured surfaces of the specimens were examined to determine the failure pattern using a digital microscope. The mean ± SD shear bond strength in MPa were 16.69±3.11, 14.21±3.63, 11.17±2.92, and 27.90±5.71 for IPS e.max Zirpress, VITA PM9, GC Initial IQ, and HASS Rosetta SM, respectively. The average shear bond strength was largest for HASS Rosetta SM, followed by IPS e.max Zirpress, Vita PM9, and GC Initial IQ(p<0.05). The digital microscopy examination of the fracture surface showed adhesive and cohesive failure in pressed lithium disilicate veneering ceramics. The use of lithium disilicate veneer ceramic produced a significantly higher shear bond strength.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.23 no.2
• /
• pp.157-170
• /
• 2007

Purpose: This investigation was designed to determine the translucency and color stability of various core ceramics for all-ceramic restoration using the CIE $L^*a^*b^*$ system. Material and Methods: IPS e.max Press ceramic(Ivoclar-Vivadent, Liechtenstein), $LAVA^{TM}$ All Ceramic(3M-Espe, Germany), Cercon Smart Ceramic(Dentsply, Germany), and Z-match Ceramic(DentAim, Korea) were used for this study. For the specimens of zirconia oxide ceramics, the as-sintered cylindrical blanks($11.0{\times}25.0mm$) were machined into the shape of a disk(0.4, 0.8, 1.5 mm in thickness, 10 mm in diameters) with a diamond grind machine. The IPS e.max Press specimens ($0.8{\times}10mm$) were fabricated using the "lost wax" technique. CIE $L^*a^*b^*$ coordinates and light transmission were recorded for each specimen with a spectrophotometer(CM-2600d, Minolta, Japan). Color differences were calculated using the equation, ${\Delta}E^*ab=[({\Delta}L^*)2+({\Delta}a^*)2+({\Delta}b^*)2]1/2$. Results: The results were obtained as follows: 1. The most translucent group was IPS e.max Press ceramic that is a glass-ceramic, and $Lava^{TM}$ and Z-match ceramic were more translucent than Cercon Smart ceramic in zirconia ceramic group. 2. In the all groups, there was no significant translucent change after 6 times heat-treatments required to make a final restoration. 3. Colored zirconia was showed more yellowish and dark than uncolored zirconia. 4. After heat-pressing, IPS e.max Press ceramic was showed high ${\Delta}E^*ab$ value(4.1 of eM1, 6.8 of eM2) that means to be more whiter than before heat-pressing. However, there was no color change after additive heat treatments for final restoration. 5. In the colored zirconia groups, there was no significant color change after some heat-treatments required to make a final restoration.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.8
• /
• pp.74-79
• /
• 2007

In general, the high cost, long time, and complex steps are required in the design and implementation of MPSoC(Multi-Processor System on a Chip), therefore a platform is used to test the functionality and performance of IPs(Intellectual Properties). In this paper, we study a platform architecture to verify IPs based on Interconnect Network among processors, and show that the MPSoC platform gives better performance than a single processor for an application program.