• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.6
• /
• pp.881-889
• /
• 2022

As interest in environmental pollution caused by ship emissions is increasing worldwide, many studies are being conducted on the development of systems that increase energy efficiency to reduce ship emissions. In order to test the energy management system controller driven in real time on a large ship, it is necessary to perform the test through the simulator. In this study, addresses were set for each signal according to Modbus TCP/IP so that each control system and energy management system could be linked, and the algorithm was configured according to the signal flow. In addition, the signal generator was designed and manufactured so that each controller could artificially generate the signal collected from the vessel. As a result of the simulator production and interlocking, it was confirmed that each controller operated in real time performed its role appropriately, and that the algorithm of the ship energy management system was properly applied.

• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.5
• /
• pp.428-433
• /
• 2004

In this paper, we developed a multi-protocol controller based on SoC and embedded Linux and applied it to integrate with BAS in a unified TCP/IP socket communication. The multi-protocol controller integrates control networks of RS-485 and LonWorks devices to BAS. The system consists of three-tier architecture, such as a BAS, a multi-protocol converter, and control devices. By using UML, we modeled the system architecture. In order to show the feasibility of system architecture, it was applied to a small BAS system. The experimental results show that the multi-protocol controller using embedded Linux is flexible and effective way to develop a building control system.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.5
• /
• pp.1125-1131
• /
• 2012

According to abrupt decrese in number of farmer and ageing society, there has been a need for development of low cost agricultural robot. In this paper, a H/W and S/W platform of caterpillar type agricultural chemical dusting robot based on XP embedded system were described. The developed agricultural robot has 2 d.o.f caterpillar type driving wheel and 2 d.o.f chemical dusting spray mechanical system. The H/W platform of the agricultural robot consists of robot controller, remote controller and sensor controller. In S/W platform, 5 processes work concurrently, which are task manager, TCP-IP communication process, localization process, wheel control, and sensor control process. This robot platform has been developed for chemical dusting robot. We proved this system's validity through field test.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.4
• /
• pp.819-824
• /
• 2015

SDN (Software Defined Network) technology, hardware and network control functions should be separated independently of existing switches or routers and data transfer functions and are also refers to a separate network architecture that can develop and run. When planning a network and designed to reflect the network control function by applying the SDN may reflect the resources efficiently. In this study, one people suggest Applications SDN, which offer an absolutely necessary part of a coded program that combines the benefits of the existing IOS (Combined Benefits) applying the model to complete the Controller part through the MPLS IOS. The OpenFlow Controller is a command to the router LER(Label Edge Router), and transmits the packet in accordance with the command to the destination according to the EXP bit. To configure TCP / IP to the IOS through the optimized coding. Using the OpenFlow protocol controller transmits an encapsulation header as defined in the MPLS packet.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.3
• /
• pp.85-93
• /
• 2012

In this paper, I designed the satellite system, using the MF-TDMA (Multi Frequency-Time Division Multiple Access) DAMA (Demand-Assigned Multiple Access) method, that allocates the satellite resources more effectively to prevent a large quantity data discard when Earth Terminals (ETs) request their satellite network resource to Network Controller (NC) by using their history information, such as traffic pattern or traffic class which have been receiving, and the network controller allocates the satellite network resource and send to earth terminals by using his history information that earth terminals have been requested already. The U.S. Military Warfighter Information Network-Tactical (WIN-T) community has selected the L-3 Linkabit MF-TDMA DAMA Network Centric Waveform (NCW) as the networking standard for full-mesh IP over SHF satellite communications. In the MF-TDMA DAMA satellite network, network controller allocates the satellite network resources and enables maximum 255 earth terminals to communicate each other for periodic satellite network resource requests of earth terminals.

• Journal of Communications and Networks
• /
• v.18 no.3
• /
• pp.460-475
• /
• 2016

The existing Proxy Mobile IPv6 suffers from a long handover latency which in turn causes significant packet loss that is unacceptable for seamless realtime services such as multimedia streaming. This paper proposes an OpenFlow-enabled proxy mobile IPv6 (OF-PMIPv6) in which the control of access gateways is centralized at an OpenFlow controller of a foreign network. The proposed OF-PMIPv6 separates the control path from the data path by performing the mobility control at the controller, whereas the data path remains direct between a mobile access gateway and a local mobility anchor in an IP tunnel form. A group of simple OpenFlow-enabled access gateways performs link-layer control and monitoring activities to support a comprehensive mobility of mobile nodes, and communicates with the controller through the standard OpenFlow protocol. The controller performs network-layer mobility control on behalf of mobile access gateways and communicates with the local mobility anchor in the Proxy Mobile IPv6 domain. Benefiting from the centralized view and information, the controller caches the authentication and configuration information and reuses it to significantly reduce the handover latency. An analytical analysis of the proposed OF-PMIPv6 reactive and proactive handover schemes shows 43% and 121% reduction in the handover latency, respectively, for highly utilized network. The results gathered from the OF-PMIPv6 testbed suggest similar performance improvements.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.5
• /
• pp.83-93
• /
• 2013

Recently, the SURF algorithm, which is conjugated for object tracking system as part of many computer vision applications, is a well-known scale- and rotation-invariant feature detection algorithm. The SURF, due to its high computational complexity, there is essential to develop a hardware accelerator in order to be used on an IP in embedded environment. However, the SURF requires a huge local memory, causing many problems that increase the chip size and decrease the value of IP in ASIC and SoC system design. In this paper, we proposed a way to design a SURF algorithm in hardware with greatly reduced local memory by partitioning the algorithms into several Sub-IPs using external memory and a DMA. To justify validity of the proposed method, we developed an example of simplified object tracking algorithm. The execution speed of the hardware IP was about 31 frame/sec, the logic size was about 74Kgate in the 30nm technology with 81Kbytes local memory in the embedded system platform consisting of ARM Cortex-M0 processor, AMBA bus(AHB-lite and APB), DMA and a SDRAM controller. Hence, it can be used to the hardware IP of SoC Chip. If the image processing algorithm akin to SURF is applied to the method proposed in this paper, it is expected that it can implement an efficient hardware design for target application.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.3
• /
• pp.567-574
• /
• 2015

In this paper, a 50ns 256-kb EEPROM IP for MCU (micro controller unit) ICs is designed. The speed of data sensing is increased in the read mode by using a proposed DB sensing circuit of differential amplifier type which uses the reference voltage, and the switching speed is also increased by reducing the total DB parasitic capacitance as a distributed DB structure is separated into eight. Also, the access time is reduced reducing a precharging time of BL in the read mode removing a 5V NMOS transistor in the conventional RD switch, and the reliability of output data can be secured by obtaining the differential voltage (${\Delta}V$) between the DB and the reference voltages as 0.2*VDD. The access time of the designed 256-kb EEPROM IP is 45.8ns and the layout size is $1571.625{\mu}m{\times}798.540{\mu}m$ based on MagnaChip's $0.18{\mu}m$ EEPROM process.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1655-1658
• /
• 2004

In this paper, we design and implement remote servo motor control system with real-time micro embedded operating system. The system, where controller and camera image grabber are mounted, handles control commands transmitted from a remote PC web browser. A hard real-time servo motor driver running on the real-time micro embedded OS and then a digital control application which confirms precise sampling time intervals is constructed. Frame grabber images transmitted from camera are saved in a image data format to view on remote PC web browser.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.3 no.4
• /
• pp.266-275
• /
• 2008

The sensorless speed control technique for BLDC motor using digital IP control is proposed in this paper for advanced speed characteristic which is robust to motor parameters and load variations. The sensorless drive of BLDC motor using terminal voltages is affected by load or speed because it uses analog filters to estimate the rotor position. For this reason, the robust speed controller with the accurate rotor position estimator is needed for sensorless control which is robust to load and insensitive to motor parameters. The constant speed robust to load variation and the stable sensorless control of BLDC motor robust to the increase or decrease of speed with constant load is implemented using digital IP control in this paper. The validity to these is established with experimentation.