• The KIPS Transactions:PartC
• /
• v.15C no.4
• /
• pp.245-252
• /
• 2008

An emergency service over Voice over IP (VoIP) network is an essential condition, like the existing telecommunication services. To support for the emergency services, standardization works have been performed. The National Emergency Number Association (NENA) has been developing the framework and procedures for an emergency service for Non-IP based network, rather than protocols. In contrast, the Internet Engineering Task Force (IETF) has been only focused on end-to-end IP-based emergency calls. The NENA architecture is incompatible with the IETF protocols. To solve the problem, we design and implement a SIP-based VoIP emergency system by adopting the NENA architecture and by applying IETF protocols, for both IP-based Pubic Safety Answering Point (PSAP) and PSTN-based PSAP. It is implemented and tested under UNIX environment.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.5 no.5
• /
• pp.447-453
• /
• 2004

In this paper, we propose a new system to block harmful Internet information based on IP spoofing. The proposed system is located on a organization's internal network and monitors all outgoing traffic and lets all this traffic go outside. Once the proposed system detects a host's access to a harmful site, it sends the host a pseudo RST packet that pretends to be the response from the harmful site, and prevents the connection between the host and the harmful site. The proposed software system is installed on only a server, and need not be installed on user hosts at all. Thus we can maintain and upgrade the blocking system easily. The performance evaluation of the proposed system shows that it effectively blocks the access to the harmful sites. Since the proposed system is based on IP spoofing, it can be used badly as a hacking tool. Finally we propose some methods to eliminate this possibility.

• Journal of Korea Multimedia Society
• /
• v.13 no.6
• /
• pp.901-910
• /
• 2010

$IP^2$, as an extended concept of the next generation IMT network, is a concept of basically supporting mobility using two steps of IP address (i.e. IPha (IP Host address) and IPra (IP routing address)) in IP backbone network. Current $IP^2$system has a shortcoming of excess usage of network resources caused by sending paging messages to all cells in LA (Location Area) in paging procedure. Considering the evolving direction of network, which is taking mobility with various speed and integration of devices into consideration, this shortcoming must be overcome. In this paper, we proposed a method to reduce time and memory for paging by maintaining current information of MN (Mobile Node) not in Active state with proxy server. Performance evaluation based on NS-2 simulations has shown that the efficiency of network resources is improved in the proposed method.

• Journal of the Korean Society of Safety
• /
• v.21 no.4 s.76
• /
• pp.25-32
• /
• 2006

LonWorks over IP(LonWorks-IP) virtual device network(VDN) is an integrated form of LonWorks device network and IP data network. In especially real-time distributed servo applications on the factory floor, timely response is essential for predictive and preventive maintenance. The time delay in servo control on LonWorks-IP based VDN has highly stochastic nature. LonWorks-IP based VDN induced transmission delay deteriorates the performance and stability of the real-time distributed control system and can't give an effective preventive and predictive maintenance. In order to guarantee the stability and performance of the system, and give an effective preventive and predictive maintenance, LonWorks-IP based VDN induced time-varying uncertain time delay needs to be predicted and compensated. In this paper new Pill control scheme based on Smith predictor, disturbance observer and band pass filter is proposed and tested through computer simulation about position control of DC servo motor. It is shown that how can the proposed control scheme be designed to minimize the effects of uncertain varying time delay and model uncertainties. The validity of the proposed control scheme is compared and demonstrated with the comparison of internal model controllers(IMC) based on Smith predictor with and without disturbance observer.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.11C
• /
• pp.1-9
• /
• 2001

The Mobile IP protocol allows IP hosts to move between different networks without changing their IP addresses. The Mobile IP systems supporting the local registration were introduced to reduce the number of times when a home registration with the remotely located Home Agent is needed. The local registration Mobile IP protocol enhanced the performance by processing the MN\`s registration requests at a local agent. However. the local registration approach may consider other aspects of the Mobile IP systems as the FA fault tolerance. In this paper, we will briefly review previous protocols to support the FA fault tolerance in hierarchical local registration Mobile If system and will propose a fault tolerance protocol with backup FA in hierarchical local registration mobile IP t() enhance the efficiency of such systems against Foreign Agent failures.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.05a
• /
• pp.543-545
• /
• 2011

The concern which is abundant in MANET VoIP for comprising the mobility guarantee and mobile network is received without the infrastructure system between the mobile terminal node. However, because the access of system and border is easy, the issue which is big in the security problem becomes more than the wired network system with this convenience by the foreign network attacker differently. In this paper, we would like to the fundamental web network, NAT and concluding the security problem technology in which Firewall can inquire on MANET VoIP and whether it is appropriate or not which can solve this is proposed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.4A
• /
• pp.390-398
• /
• 2004

This paper describes a study on the automatic generation system of the interface for communication among AMBA bus and IPs with different protocols. Employing an extended STG, the proposed system generates the interface modules required for the communication among IPs with different protocols. For an example system, the interface module for communication between AMBA AHB bus and a video decoder has been generated and verified in its functionality. The area and latency have been compared with the manually designed interface. For burst-mode communication, the generated interface module shows the comparable performance with the manually designed module. For single-mode communication, the generated interface module shows a slightly worse performance than the manually designed module. However, the increased area is negligible considering the size of the IP.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1235-1239
• /
• 2003

On the base of network frame and protocol system of Ethernet the networked sensing technology based on Ethernet is studied and the design principles of industrial Ethernet measurement of control system is put forward, and the general structure model is built in the paper. An eight-bit economical MCU scheme is proposed, and a general scheme of distributed intelligent networked measuring and control equipment based on TCP/IP is designed too. A compact TCP/IP protocol stack are successfully implemented in eight-bit MCU. With C51 program language, method of modularized programming is applied in soft design. The problem of in-system modifying measuring and control strategy of its system is solved successfully by assigning memory dynamically and saving parameter with EEPROM, and it makes the intelligent networked measurement and control system can explain and analyses control strategy from PC. Experiment result shows that, the research of intelligent networked measurement and control equipment and system base on TCP/IP is successful, with flexible network, convenient usage, and good commonality.

• Proceedings of the IEEK Conference
• /
• 2004.06a
• /
• pp.35-38
• /
• 2004

In this paper, we aim to implement the embedded VoIP Phone based on EISC core Microcontroller. EISC is recently new microprocessor architecture, which contains both advantage of RISC and CISC. This advantages are desirably resulted in high code density, high performance and 16/32/64bit scalable instruction length. Also, we select the embedded system which can be guaranteed performance and economical efficiency for implementation that system. As the step of this research, we first study basic system for implementation of target system. Next, we construct the structure of embedded VoIP Phone based on 32bit EISC MCU efficiently. And then we realize that constructed system and verify the performance of that realized system by the test of voice communication in field.

• Proceedings of the KIEE Conference
• /
• 2004.07d
• /
• pp.2386-2388
• /
• 2004

Recently, rapid process of network technology has an effect on the field of control engineering. And it gives effect to network control system(NCS) research that grafts existing control system and network has been studied. According to one-chip development of TCP/IP that is the most useful in LAN server for hardware, it can usefully and conveniently apply to network control system before. This paper construct network control system that can work close-loop control takes advantage of Ethernet that is the most for general data transmission network. Here, protocol uses for data transmission makes use for TCP/IP. This work the basic data transmitter-receive experiment to take advantage of network node was produced. And then, DC-motor can be control plant. Finally, I will prove to build speed control system of multiple DC-motor through Ethernet.