• 품질경영학회지
• /
• 제49권2호
• /
• pp.213-231
• /
• 2021

Purpose: This study intends to provide decision-making information to improve efficiency by analyzing the management efficiency of smart greenhouse business entities and identifying factors that affect the efficiency based on input and output. Methods: The subjects of analysis were business entities for cultivating strawberries in smart greenhouses in Jeolla region (northern and southern Jeolla provinces), and the analysis focused on the management performance of the 2019-2020 crop period (year). Data Envelopment Analysis(DEA) was applied as an analysis method for efficiency analysis, Quantile Regression(QR) analysis was applied as a factor affecting the efficiency. Results: The reason for the efficiency gap between business entities was that there were many business entities that did not minimize the input cost at the current level of output, and the area where the variance among business entities was large was the fixed cost per 10a. In the results of the affecting factor analysis, it was found that the seed-seedlings cost, fertilizer cost, other material cost, and employment and labor cost had a negative (-) effect on the efficiency, and that the repair and maintenance cost had a positive (+) effect. Conclusion: Therefore, to achieve the efficiency of scale, it is necessary to reduce the input scale to an appropriate level. In the case of business entities with low efficiency by quartile, the seed-seedlings, fertilizer, and other material costs reduce expenditures, and repair maintenance costs can improve efficiency by increasing expenditures.

• 한국응용과학기술학회지
• /
• 제37권4호
• /
• pp.839-847
• /
• 2020

본 연구는 외발 착지 시 신체적 특성 요인들인 발목 유연성, 성별, Q-angle이 발목 관절 상해 요인들에 미치는 영향을 분석하는데 목적이 있었다. 이를 위해 오른발을 주발로 사용하고 체육을 전공하는 20대 남성 16명(나이: 20.19±1.78 years, 체중: 69.54±10.12 kg, 신장: 173.22±4.43 cm), 여성 16명(나이: 21.05±1.53 years, 체중: 61.75±6.97 kg, 신장: 159.34±4.56 cm)을 연구대상자로 선정하였다. 외발 착지 시 신체적 특성 요인들이 발목 관절 상해에 미치는 영향을 확인하기 위하여 첫째, 발목 상해 경험에 따른 하지 관절 움직임과 관절 모멘트의 독립 t-test를 실시하였다(α = .05). 둘째, t-test를 통하여 유의한 차이를 나타낸 변인을 종속변인으로 설정하고 발목 유연성, 성별의 차이, Q-angle을 독립변인으로 지정하여 선형다중회귀분석(Multiple Linear Regression)을 사용하였다(α = .05). 본 연구결과 발목 관절 상해를 경험한 그룹은 상해를 경험하지 않은 그룹과는 다르게 발목 관절의 내전, 무릎 관절의 내측 회전을 통한 착지 전략과 기술을 사용하는 것으로 나타났다. 또한 이러한 움직임은 발목 관절의 신전 모멘트를 증가시키고, 엉덩 관절의 신전 모멘트는 감소시키는 것으로 확인되었다. 특히 발목의 배측굴곡 유연성은 발목과 무릎의 착지전략에 영향을 미치며, 성별의 차이는 발목의 신전 모멘트에 영향을 미치는 것을 알 수 있었다. 따라서 외발 착지 시 신체적 특성 요인들이 발목 관절 상해에 영향을 미치는 요인들임을 확인 할 수 있었다.

• Journal of Applied Biological Chemistry
• /
• 제66권
• /
• pp.282-288
• /
• 2023

코로나19 바이러스의 대유행으로 바이러스와 같은 외부 병원균으로부터 우리의 몸을 보호하는 면역 기능 개선 건강기능식품의 시장은 점차 증가하고 있다. 우리는 본 연구에서 높은 조단백, 조지방, 식이섬유 함량을 나타내는 고영양식품인 청국장이 면역 강화 기능을 나타냄을 밝혀내고자 하였다. 청국장 열수 추출물은 RAW 264.7 세포에서 세포독성을 나타내지 않으며, 대식세포의 nitric oxide, reactive oxygen species 및 interleukin (IL)-6, IL-1β, tumor necrosis factor-α 사이토카인의 생산량을 증가시켰다. 또한, 청국장 열수 추출물은 RAW 264.7 세포에서 inducible nitric oxide synthase 및 cyclooxygenase-2의 발현을 유의적으로 증가시켰다. 청국장 열수 추출물은 RAW 264.7 세포에서 I kappa B kinase α/β와 I kappa B (IκB)α의 인산화 및 IκBα의 degradation을 증가시켰으며, Nuclear factor-kappa B p65의 인산화를 증가시켜 p65의 세포질에서 핵으로의 이동을 촉진하였다. 이러한 연구 결과는 청국장 추출물이 선천성 면역 반응을 강화하는데 유망한 건강기능식품 소재로 활용될 수 있음을 시사한다.

• 대한치과보철학회지
• /
• 제41권4호
• /
• pp.503-518
• /
• 2003

Statement of problem : There have been previous studies about considerable variations in machining accuracy and consistency in the implant-abutment-screw interfaces. Purpose : The purpose of this study was to evaluate the machining accuracy and consistency of implant/abutment/screw combinations on two randomly selected implants from each of four manufactures. Material and methods : In this study, screws were respectively used to secure a cemented abutment, to a hexlock implant fixture ; teflon coated titanium alloy screw(Torq-Tite) and titanium alloy screw in Steri--Oss system, gold-plated gold-palladium alloy screw(Gold-Tite) and titanium alloy screw in 3i system gild screw ana titanium screw in AVANA Dental Implant system, and titanium screws in Paragon System. The implants were perpendicularly mounted in polymethyl methacrylate autopolymerizing acrylic resin block(Orthodontic resin, Densply International Inc. USA) by use of dental surveyer. Each abutment screw was secured to the implant with recommended torque value using a digital torque controller. Each screw was again tightened after 10 minutes. All samples were cross sectioned with grinder-polisher unit(Omnilap 2000 SBT Inc) after embeded in liquid unsaturated polyester (Epovia, Cray Valley Inc) Results : There were the largest gaps in the neck areas of screws in hexagonal extension implants which were examined in this study. The leading edge of the abutment screw thread (superior surface) was in contact with the implant body thread, and the majority of the contacting surfaces were localized to the middle portion of the mating threads. Considerable variation in the contacting surfaces was noted in the samples evaluated. Amounts of contact in the abutment screw thread were larger for assemblies with Gold-Tite screw, gold alloy screw. Torq-Tite screw than those with titanium screws. The findings of intimate contact between the screw and screw seat were seen in all samples, regardless of manufacturers. However, microgap between the head and lateral neck surface of the screw and the abutment could be dectected in all samples. The findings of intimate contact between the platform of the implant and the bottom of the abutment were consistent in all samples, regardless of manufacturers. However, microgaps between the lateral surface of external hex of the fixture and the abutment could be dectected in all samples. Conclusion : Considerable variations in machining accuracy and consistency were noted in the samples and the implant-abutment-screw interfaces were incomplete. From the results of this study, further development of the system will be required, including improvements in pattern design.

• 생물환경조절학회지
• /
• 제23권3호
• /
• pp.250-255
• /
• 2014

본 연구는 살균 소독제로 오존을 이용하고. 살균효과를 극대화 할 수 있는 방식으로 마이크로버블 장치에 오존을 공급하여 배양액 재처리 기술을 위한 오존 마이크로버블의 살균효과를 구명하고자 실시하였으며 결과를 요약하면 다음과 같다. 마이크로버블 장치의 성능에서 압력 $3.5kgf{\cdot}cm^{-2}$에서 평균입경은 $27.42{\mu}m$로 측정되었고 마이크로버블의 발생량은 당 평균 12만개로 나타났으며, 적정 오존 발생량은 $3g{\cdot}h^{-1}$일 때 오존농도는 2ppm, 배출 오존농도는 0.06ppm에 도달하는 것으로 나타났다. 병원균 살균효과는 오존수의 경우 FO, PC와 CG 모두 오존농도 0.5ppm, 처리시간 30초만으로도 현저한 감소를 보였다. FO는 오존농도 0.5ppm, 처리시간 60초 이내에서 멸균되었고, PC는 오존농도 2.0ppm, 처리시간 30초 이내에서 멸균되었으나, CG의 경우 2.0ppm 이상의 오존수를 처리하여야 할 것으로 판단되었다. 오존가스의 경우 처리시간 120초 이내에서 현저한 감소를 보였으며, FO와 PC는 처리시간 180초 이내에서 멸균되었고, CG의 경우 180초 이상 오존가스를 처리하여야 할 것으로 판단되었다.

• 센서학회지
• /
• 제31권3호
• /
• pp.180-186
• /
• 2022

Photosynthetically active radiation flux density (PPFD) and daily light integral (DLI) values related to plant photosynthesis were obtained using the sunlight time and insolation data points in the agricultural weather sensor data for Jinan-gun, Jeollabuk-do, Korea from 2016 to 2020. The objective was to optimize the photo-environmental conditions for cultivating ginseng. The range of average monthly sunshine duration was 395.5-664.1 min, with the longest duration observed in June. The range of average annual accumulated daily insolation was 11.98-17.65 MJ·m^-2. The range of average daily external DLI calculated from the insolation and solar time data was 22.3-36.1 mol·m^-2·d^-1, and the annual cumulative DLI was 8,156-13,175 mol·m^-2·d^-1. Both the insolation and DLI values were the highest in 2016 and lowest in 2020. Based on the PPFD required for ginseng growth (111-185 µmol·m^-2·s^-1), the monthly average daily DLI and monthly cumulative DLI were 3.51-5.87 and 82-228 mol·m^-2·d^-1, respectively. The range of five-year average value for the external monthly cumulative DLI was 298-1,459 mol·m^-2·d^-1, and the monthly cumulative DLI values when a black double shading film and blue-white shading film were applied were 101-496 and 36-175 mol·m^-2·d^-1, respectively. A comparative analysis of DLI values indicated that shading was required to ginseng growth throughout the year under natural light. When the black double shading film was used, shading was required from March to October. When the blue-white shading film was applied from April to August, (i.e., the period with active ginseng growth) the appropriate DLI for ginseng growth could be continuously maintained. Regional weather differences due to climate change are gradually increasing, and even in one region, monthly and cumulative DLI values are different every year. Therefore, in order to implement a precise agricultural environment for ginseng cultivation, precise analysis and continuous research using agricultural weather sensor big data is required.

• 한국CDE학회논문집
• /
• 제20권2호
• /
• pp.182-192
• /
• 2015

In recent years, numerous studies have attempted to extract quantity data by using Building Information Modeling (BIM). In terms of open-BIM based quantity take-off at the early design stage, only few studies were conducted in the field of cost engineering. A lack of compatibility of open BIM for information exchange is postulated as the cause. The Industry Foundation Classes (IFC) extension model has been developed to accommodate the interoperability with quantity take-off software. Improvement of open BIM for quantity take-off needs exchange requirements and model guidelines. For this purpose, the quantity data of IFC models were analyzed using BIM analysis tools. This paper also provides a proposal of requirements on open BIM based quantity take-off at the early design stage. Further this study have been develop the interface system for open BIM based quantity take-off requirements with the results on this study.

• Genomics & Informatics
• /
• 제5권4호
• /
• pp.152-160
• /
• 2007

Most common diseases are caused by multiple genetic and environmental factors. Among the genetic factors, single nucleotide polymorphisms (SNPs) are common DNA sequence variations in individuals and can serve as important genetic markers. Recently, investigations of gene-based and whole genome-based SNPs have been applied to association studies for marker discovery. However, SNPs are so population-specific that the association needs to be verified. Fifty-five genes and 384 SNPs were selected based on association with disease. Genotypes of 337 SNPs in candidate genes were determined using Illumina Sentrix Array Matrix (SAM) chips by an allele-specific extension method in 364 unrelated Korean individuals. Allelic frequencies of SNPs were compared with those of other populations obtained from the International HapMap database. Minor allele frequencies, linkage disequilibrium blocks, tagSNPs, and haplotypes of functional candidate SNPs in 55 genetic disease-associated genes were provided. Our data may provide useful information for the selection of genetic markers for gene-based genetic disease-association studies of the Korean population.

• Journal of Microbiology and Biotechnology
• /
• 제12권3호
• /
• pp.382-388
• /
• 2002

In order to assess the effects of organic fertilizer on soil microbial community structure and diversity in the greenhouse fields, fatty acid methyl ester (FAME) was analyzed by the MIDI (Microbial ID, Inc., Newark, DE, U.S.A.) system and enumerations were performed. In relation to bacterial division of each sample, low GC Gram-positive bacteria were predominant among bacteria cultured on aerobic bacteria media. On the other hand, alpha subdivision was predominant on proteobacteria of control and OM (organic matter) 1 treated plot, and Flavobacterium spp. existed in OM2 plot on crystal violet media of all samples. Shannon-weaver Index (H) of OM1 plot varied most by 1.9 and 5.0 among bacteria cultured on aerobic bacteria media and crystal violet media, respectively. Our results revealed that addition of the organic wastes to soil led to a highly diverse microbial community, but the excessive amounts of organic and mineral fertilizer applied in the greenhouse fields produced excess nutrients in soil and led to simplification on bacterial populations.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.502-507
• /
• 2009

Trend of mechanical ventilation system applied to apartment house is introduced and feasibility study on installation of the individual room control ventilation as energy-saving method is carried out through field experiment. While initial cost of installation for the individual room control ventilation increases, the running cost is lower than the individual household control ventilation due to automatic flow rate control and reduction of fan power, and the management cost also decreases due to extension of use life of components. As the results of field experiment on $115m^2$-type apartment house, the individual room control ventilation could save the amount of 1,459.5Wh/day when compared with the individual room control ventilation