• Journal of The Korean Society of Grassland and Forage Science
• /
• v.43 no.4
• /
• pp.240-247
• /
• 2023

This experiment investigated the effects of feed additives of Sasa quelpaertensis Nakai (SQN) extract on Landrace pigs on economic traits such as the quality, physiological characteristics, and productivity. Sixteen pigs with an average age of 154 days were selected as experimental subjects. The experiment was conducted by dividing the group into eight pigs for the supplementation group, feeding with SQN extract, and another eight for the control group feeding without SQN extract. Water was fed ad libitum. On the 30th day, there was no significant difference between meat quality and productivity. However, the glucose and thyroxine were statistically lower with the supplementation group than with the control group (p<0.05). Also, the levels of creatinine difference between 1.18 ± 0.12 mg/㎗ with the supplementation group and 0.70 ± 0.06 mg/㎗ with the control group (p<0.05). However, all serum biochemistry values were within a normal range, with no health problems. The present study will help solve the problem of reducing the diversity of plant species in Halla Mountain by increasing the availability of the SQN as a pig feed additive.

• Toxicological Research
• /
• v.24 no.2
• /
• pp.109-112
• /
• 2008

The G184C and G134A single nucleotide polymorphisms(SNPs) of the CYP1A1 gene result in Ala62Pro and Gly45Asp substitutions, respectively. Here, we tested whether these SNPs are associated with an alteration in lung cancer incidence. We examined 80 Korean subjects with lung cancer and 240 age- and sex-matched controls. For each subject, the CYP1A1 gene was PCR amplified and sequenced. We observed that the odds ratio(OR) for lung cancer was 3.37 higher in subjects with the G184C polymorphism than in controls(95% confidence interval(CI), $0.89{\sim}12.73$, P=0.07). In contrast, the OR for lung cancer was 1.23 in subjects with the G134A polymorphism compared to controls(95% CI, $0.68{\sim}2.20$, P=0.49). The G184C polymorphism exacerbated the effects of smoking on lung cancer development. Gene-smoking interaction analyses revealed that past or present smokers with the G184C polymorphism had a higher incidence of lung cancer(OR, 24.72; 95% CI, $4.48{\sim}136.31$; P<0.01) than control smokers(OR, 6.65; 95% CI, $2.72{\sim}16.28$; P<0.01). However, there was only a slight difference in the ORs for lung cancer between control smokers and smokers with the G134A polymorphism. These findings suggest that the G184C polymorphism, but not the G134A polymorphism, is associated with an increased risk of lung cancer.

• Proceedings of the KSME Conference
• /
• 2001.06d
• /
• pp.325-330
• /
• 2001

One of the principal components of the KSTAR (Korea Superconducting Tokamak Advanced Research) tokamak structure is the vacuum vessel, which acts as the high vacuum boundary for the plasma and also provides the structural support for internal components. Hyundai Heavy Industries Inc. has performed the engineering design of the vacuum vessel. Here the overall configuration of the KSTAR vacuum vessel was briefly described and then the design methodology and the analysis results were presented. The vacuum vessel consists of double walls, several ports, leaf spring style supports. Double walls are separated by reinforcing ribs and filled with baking/shielding water. The overall external dimensions of the main body are 3.39 m high, 1.11 m inner radius, 2.99 m outer radius, and made of SA240-316LN. The vacuum vessel was designed to be capable of achieving the base pressure of $1\times10^{-8}$ Torr, and also to be structurally capable of sustaining the vacuum pressure, the electromagnetic and thermal loads during plasma disruption and bakeout, respectively. The vacuum vessel will be baked out maximum $150^{\circ}C$ by hot pressurized water through the channels formed between double walls and the reinforcing ribs. A 3-D temperature distribution and the resulting thermal loads in the vessel were calculated during bakeout. It was found that the vacuum vessel and its supports were structurally rigid based on the thermal stress analysis. The maximum electromagnetic loads on the vacuum vessel induced by eddy and halo currents resulting from the engineering plasma radial and vertical disruption scenarios have been estimated. The stress analyses have been performed based on these electromagnetic loads and the resulting stresses at he critical locations of the vacuum vessel were within the allowable stresses.

• Reproductive and Developmental Biology
• /
• v.34 no.3
• /
• pp.235-240
• /
• 2010

This study was performed to comprehend the plasma proteins expressed specifically during early pregnancy in pregnant or non-pregnant Hanwoo using proteomic analysis technique. Plasma samples (0, 2, 3, 4, 7, and 11 weeks after AI) were obtained from pregnant (P, n=3) or non-pregnant (NP, n=4) Hanwoo, respectively. To evaluate proteins differentially expressed, 2-dimensional electrophoresis (2DE) was conducted. Normalized protein spots were selected for the significant expression variation deviated over two fold in its expression level between two groups; Molecular functions of the proteins were DNA binding, protein binding, hemoglobin binding, ferrochelatase and transporter activity and arylestera, respectively. According to western blotting, haptoglobin was specifically expressed only in NP group during early pregnancy; however, paraoxonase 1 was highly expressed in pregnant group. Based on these results, pregnancy was maintained successfully by the activation of specific plasma proteins associated with immune system and antioxidant regulation during early pregnancy in Hanwoo.

• International Journal of Highway Engineering
• /
• v.16 no.5
• /
• pp.1-8
• /
• 2014

PURPOSES : The objective of this study is to evaluate the bond strength of asphalt emulsions including polymer-modified emulsions for chip seals and fog seals using the bitumen bond strength (BBS) test. METHODS : For the laboratory testing, the Pneumatic Adhesion tensile Testing Instrument(PATTI) device is used to measure the bond strength between the asphalt emulsion and aggregate substrate based on the AASHTO TP-91. In order to conduct all the tests in controled condition, all test procedures are performed in the environmental chamber. The CRS-2L and the SBS CRS-2P emulsions are used as a polymer-modified emulsion, and then unmodified emulsion, the CRS-2, is compared for the evaluation of chip seal performance. For the fog seal performance evaluation, two types of polymer-modified emulsions and one of unmodified emulsion, the CSS-1H, are employed. For chip seal study, the BBS tests are performed at 30, 60, 120, and 240 minutes of curing times with curing and testing temperatures of $15^{\circ}C$, $25^{\circ}C$, and $35^{\circ}C$. The fog seal tests are conducted at 30, 60, 90, 120, 180 minutes, and 24 hours with curing and testing temperatures of $25^{\circ}C$, $30^{\circ}C$, and $35^{\circ}C$. RESULTS AND CONCLUSIONS : Overall, chip seal emulsions and fog seal emulsions show the similar bond strength trend. At the same testing condition, polymer-modified emulsions show better bond strength than unmodified emulsions. Also, there is no significant difference between polymer-modified emulsions. One of important findings is that the most bond strength reaches their final bond strength within one hour of curing time. Therefore, the early curing time plays a vital role in the performance of chip seals and fog seals.

• International Journal of Highway Engineering
• /
• v.17 no.6
• /
• pp.47-54
• /
• 2015

PURPOSES : The objective of this study is to evaluate the early adhesive characteristic of asphalt emulsions, including polymer-modified emulsions, for chip seals using the surface energy concept, the bitumen bond strength (BBS) test, and the Vialit test. METHODS : Two general methods, the BBS test and Vialit test, were applied to investigate the bond strength and the aggregate loss, respectively. A new theory, the surface free energy (SFE) theory, was used to evaluate the adhesive characteristic between the emulsion and the aggregate. Based on the theory, the contact angles were measured, and then the surface energy components were calculated. Using those components, the work of adhesion (Wa) was calculated for each emulsion. To ensure reliable results, all the tests were performed under the same conditions, i.e., at $25^{\circ}C$ for 240 minutes of curing time. For the materials, three emulsions (CRS-2, CRS-2L, and CRS-2P) and one aggregate type (granite) were employed. RESULTS AND CONCLUSIONS : Under the same conditions, the modified emulsions showed better adhesive characteristics and curing behaviors than the unmodified emulsions. In addition, there was no significant difference between the various modified emulsions. One of the important findings is that the analysis by Wa presents more sensitive results than other methods. The results of the Wa showed that the CRS-2P emulsion has the best adhesive characteristics. Consequently, the use of modified emulsions for chip seals could prevent aggregate loss and allow open traffic earlier.

• Korean Parent-Child Health Journal
• /
• v.5 no.2
• /
• pp.224-240
• /
• 2002

As social changes, there are growing number of instituted infants. Most of them were poor growth and developmental outcome due to situational and environmental vulnerability. Developmental interventions for this infants have been the subjects of debate for many years. The purpose of this study was to evaluate the effectiveness of massage intervention on the physical growth of orphaned infants during the first 6 month of life. This study utilized equivalent control group with repeated measuring by quasi experimental design. Fifty eight orphaned infants were randomly assigned to control(n=28), or an experimental(n=30) group. In addition to routine orphanage care, infants in the experimental group received 15 minutes of massage intervention twice a day, 5 days a week, for 4 weeks. Data has been collected from April 1st, 2000 to August 31st, 2002 and were analyzed using SPSS/PC(Version 10.0) with chi-square test, t-test, and repeated measures ANOVA to determine the effectiveness of massage intervention and to test the homogeneity of general characteristics between experimental and control group. The results were as follows; Compared to the control group, the experimental group has gained significantly more weight(F=33.52, p < .0001) and had larger increases in length(F=10.04, p < .0001) and head circumference(F=49.78, p < .000) after the 4-week intervention period and at 6 months of age. These data demonstrate that massage intervention may be effective in facilitating growth for newborn infants placed in orphanages during first 6 months of life.

• Journal of radiological science and technology
• /
• v.29 no.4
• /
• pp.237-240
• /
• 2006

The Noise of CR Systems is made up of X-ray quantum mottle and additional Imaging plate's structure noise, photon noise of lumine cence, noise of electrometer, quantization noise etc. In this Regius 150 system, SNR was increased from 8.2 to 30 with linearily according to radiation dose from 0.1 mR to 100 mR. It means that the Regius 150 system has enough trustability because of SNR is over 5 by Rose Model. NPS was calculated two dementional Fourier Transform with shake of pixel value in the white Image. In the spatial frequence range of $0.5\;lp/mm{\sim}2.5\;lp/mm$, the NPS was distributed $10^{-4}{\sim}10^{-5}$ at 1 mR X-ray dose. That is similar result compare other systems to that of Kodak CR system reported by Carlu, HR-CR system reported by Dobbins.

• Journal of radiological science and technology
• /
• v.42 no.6
• /
• pp.461-467
• /
• 2019

The purpose of this study was to investigate the knowledge, attitudes and behaviors of radiation protection in operating room and intensive care unit nurses. The Participants for this study consisted of 240 nurses working in operating rooms and intensive care units of 7 general hospitals located in Busan, South Korea. The data were collected from Feb. 15 to Feb. 29, 2016. The study results were as follows. First, 72.9% of the nurses had never been educated for radiation safety. Second, the mean score of knowledge for radiation protection was 9.21. The knowledge score of radiation safety educated nurses is higher than uneducated of nurses(t=-5.67, p<.001). Third, The mean score of attitude towards radiation protection was 41.80. The attitude score of radiation safety educated nurses is lower than uneducated of nurses(t=0.02, p<.030). Fourth, the mean score of behavior for radiation protection was 32.57. The behavior score of radiation safety educated nurses is higher than uneducated of nurses(t=0.35, p=.001). Consequently, it was found that nurses had lack of the radiation safety education. Overall knowledge and behavior towards radiation protection was low. Therefore, it is necessary to raise awareness of radiation protection and to educate, manage, and improve processes to increasing compliance with protective measures against radiation.

• Journal of Technologic Dentistry
• /
• v.40 no.1
• /
• pp.33-40
• /
• 2018

Purpose: The purpose of this study was to investigate the influence of mechanical properties of various ultra-dental stone by setting methods. Methods: 240 cylinder specimens($10mm{\times}20mm$) were prepared from three ultra-dental stones(Gemma, Die keen and Fuji rock; n = 80) in accordance with the manufacturers' recommendations. Half of the specimens of each stone(n = 40) were dried in open air within a room temperature; the other half(n = 40) underwent in a silicone rubber mold in open air for 30 minutes and then were dried in a microwave oven for 10 minutes to 600W. Compressive strength(CS), compressive modulus(CM) and diametral tensile strength(DTS) conducted until fracture using Instron 5966 at each of the following periods: 1 and 24 hours from mixing. One-way analysis of variance and Scheffe's post hoc test were performed for statistical comparisons at a significance level of P<.05. Results: The CS and CM values in all dental stone indicated highest after 24h(54.25 MPa < ) than the values for specimens dried in microwave method. The DTS values revealed the highest microwave method. However, in 24h, FJ(Fu-ji rock) and GM(Gemma) had lower mechanical properties than air. Conclusion : Within the limitations of this study, CS did not influence by microwave method but DTS affected according to the setting.