• Journal of Korean Society of Steel Construction
• /
• v.23 no.1
• /
• pp.113-124
• /
• 2011

This study concerned the interoperability between the structural-analysis model and the default detail model in steel structures available for the structural-design process based on BIM. The purpose of the study was to develop an interface module that can perform data conversion between the analysis and design applications and the BIM applications, through the dotnet frame work development environment using OpenAPI provided by the BIM application vendor. The direct-link method was applied for BIM interoperability. A basic-frame model for detail design and modeling was created from the structural-analysis model to verify if the application was developed. Finally, the proposed process was compared with the existing process to verify the efficiency of the former.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.11
• /
• pp.17-23
• /
• 2004

The implementation and design of the wideband IFIU using aperture open loop resonator and reversed phase technique to reduce the local oscillator leakage signal was represented in this paper. The local oscillator leakage signal is generated in stage of frequency conversion, especially in frequency conversion of fully digital modulation signal close to DC signal. The leakage signal and spurious signals, which have effects on adjacent channel or in-band channel as interference signals, were reduced below -60 dBc for 45 Mbps and 155 Mbps IF interface units. The group delay for both IFIUs shows low ripple characteristics of 15 ns and 8 ns, respectively. Also, the amplitude ripple characteristic in 150 MHz bandwidth with L-band center frequency satisfies the required specification of 2 dB. The implemented IFIU provides the required specifications for wideband satellite communication system.

• The Journal of Korean Institute for Practical Engineering Education
• /
• v.5 no.1
• /
• pp.40-44
• /
• 2013

This paper suggests a multimodal interface control module which allows a student to naturally interact with educational contents in virtual environment. The suggested module recognizes a user's motion when he/she interacts with virtual environment and then conveys the user's motion to the virtual environment via wireless communication. Futhermore, a haptic actuator is incorporated into the proposed module in order to create haptic information. Due to the proposed module, a user can haptically sense the virtual object as if the virtual object is exists in real world.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.3
• /
• pp.98-109
• /
• 2002

Bluetooth technology is a publicly available specification proposed for Radio Frequency (RF) communication for short-range :1nd point-to-multipoint voice and data transfer. It operates in the 2.4㎓ ISM(Industrial, Scientific and Medical) band and offers the potential for low-cost, broadband wireless access for various mobile and portable devices at range of about 10 meters. In this paper, we describe the structure and the test results of the bluetooth baseband module with direct memory access method we have developed. This module consists of three blocks; link controller, UART interface, and audio CODEC. This module has a bus interface for data communication between this module and main processor and a RF interface for the transmission of bit-stream between this module and RF module. The bus interface includes DMA interface. Compared with the link controller with FIFOs, The module with DMA has a wide difference in size of module and speed of data processing. The small size module supplies lorr cost and various applications. In addition, this supports a firmware upgrade capability through UART. An FPGA and an ASIC implementation of this module, designed as soft If, are tested for file and bit-stream transfers between PCs.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2004.05a
• /
• pp.766-769
• /
• 2004

IT(Information Technology)분야의 발전과 함께 RT(Robot Technology)분야도 21fl기의 유망한 첨단기술로 손꼽히고 있다. 현재의 로봇은 그동안 주류를 이루던 산업용 로봇과는 달리 소프트컴퓨팅, 인간친화 인터페이스, 상호작용기술, 음성인식, 물체인식, 사용자 의도파악 등 갖가지 최첨단 기술들이 요구되는 퍼스널 로봇이 각광을 받고 있으며, 특히 오락용, 교육용 로봇들로 대표되는 엔터테인먼트 로봇(Entertainment Robot)분야가 요즘 국내·외에서 활발히 연구되고 있는 실정이다. 엔터테인먼트 로봇은 정형화된 작업만을 하는 것이 아니라 다양한 환경에서 여러 가지 작업을 해야만 한다. 따라서, 장난감 로봇처럼 인간과의 감정대화가 가능한 지능 시스템을 갖춰야만 한다. 그러므로 본 논문에서는 If분야와 RT분야의 접목으로 시너지 효과를 크게 얻을 수 있는 새로운 기술 개념인 RCP(Robotic C태ular Phone)에 대한 개녕을 정의하고, RCP의 기능성 모듈 중 하나인 감성진동 모들에 대한 기본적인 이론과 실험적 결과를 롱하여 로보틱 셀폰의 감성진동 모듈의 우수성을 확인한다.

• Journal of IKEEE
• /
• v.25 no.4
• /
• pp.703-709
• /
• 2021

As drone technology advances, the risks of drones are increasing, then technology to detect drones is becoming important. In this thesis, it was verified that miniaturized and lightweighted active array antenna could be used for radar system to detect drones in reality. The transmit-receive module was designed in the form of tile-type to simplify interconnections between devices. The waveform generation module and the down conversion module were miniaturized to include in one body too. As a result of verifing the detection performance through test, it was confirmed that the detection range was over 3.7Km.

• Journal of Technology Innovation
• /
• v.27 no.2
• /
• pp.37-71
• /
• 2019

How has the passenger car's architecture evolved? In the meantime, the discussions on the car architecture have been mixed, i.e., integral, modular, and the coexistence of two types. Therefore, in this study, we aim to develop two indices can measure the degree of modularization of passenger car and its all modules using global trade data. By applying the indices to the framework of architecture positioning that reflects the hierarchical structure of a product, we examined that the degree of modularization of the passenger car architecture has been enhanced. Meanwhile, the degree of modularization differs across the modules that make up the car. Specifically, we observed the higher degree of modularization in front-end, cockpit and seat modules. Whereas, we found that body module had a relatively low degree of modularization. In particular, we observed that the platform of passenger car has notably modularized due to carmakers' efforts to achieve model diversification and reduction of cost and period in new product development at the same time. Interestingly, we showed that three modules, i.e., engine, chassis (relatively less modularized), and transmission (relatively highly modularized), had a different level of modularization, even if they commonly make up the platform. We contribute to the suggestion for analytical approaches that examine the degree of modularization and its progress longitudinally. In addition, we propose the necessity of decomposition of a system into elements in a study of product architecture, considering the possibly distinctive progress of modularization across the elements.

• Journal of Korea Multimedia Society
• /
• v.6 no.2
• /
• pp.340-351
• /
• 2003

We introduce our experiences of the design and implementation of the Page Together system that has expanded hyperlink metaphor to utilize human resources in the web. This system supports that a user connects with others in the web, communicates through video/audio channel, navigates same web pages simultaneously and cooperates some work on Internet. For these functions, it comprises Collaborative Browsing Module (CBM), Multimedia Conferencing Module(MCM) Data Conferencing Module(I)CM) and Multi Protocol Interface(MPI). We adopted three standard protocols, IEC, H.323 and T.120 for each nodule and it allows developers to use them easily. We also defined MPI to synchronize information of session among modules. Each module exchanges information each other in session creating process and session terminating process. After a session is created once, each module works independently as its won protocol. Interferences among modules are reduced as minimizing to exchange information. We also introduce a web site that provides web board service based on the Page Together system. A user may post a notice with a link to himself/herself on our web board. After then, if someone read that notice and has any question about it, he or she can try to connect to the writer as clicking the link in that notice and communicate each other. This service site shows that our system can be applied to diverse internet services such as distance teaming and distance conference.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.1
• /
• pp.39-45
• /
• 2011

The processes for manufacturing a product differ depending on the characteristics of the product, and the information used or generated by the processes also varies. To implement a flexible and configurable Manufacturing Execution System (MES), a Data Acquisition System (DAS) that takes into consideration the characteristics of the manufacturing system is required. In this study, we design an information acquisition system that can process the information on equipments of a shop floor in real-time and that is adaptive to the changes in the shop floor. The system has a data parser module for flexible processing of the equipment status, a data mapper module to link the equipment status with a manufacturing process, and an SOA-based data integration module to transmit the processed information to other information systems such as MES and ERP. From the results of pilot study, its maintenance is easy even if new equipment or new manufacturing processes are adopted or if the equipments are rearranged.

• Journal of KIISE:Computing Practices and Letters
• /
• v.6 no.3
• /
• pp.319-328
• /
• 2000

The Message-Passing Interface(MPI) is a standard interface for parallel programming environment, based on that application programs run on the processors of a parallel computer. Processor nodes execute processes consisting the program by passing messages to one another. During executing, however, if a fault occurs on a processor node or a process, this will result an inconsistent state, and consequently, the whole program will have to be stopped. To solve this problem, in this paper, we propose a fault-tolerant message passing interface(FT-MPI) by adding a fault manager module to MPI. The proposed FT-MPI does not need any hardware support, and each application program based on MPI can run on the FT-MPI without any modification. The proposed fault tolerance scheme uses the so-called hot-spare process duplication method, and verified by simulations that application programs run despite of any fault with less than 5% overhead on execution time.