• Proceedings of the Korea Information Processing Society Conference
• /
• 2014.11a
• /
• pp.203-206
• /
• 2014

무선 LAN(Wireless Local Area Networks 의 DCF(Distributed Coordination Function) 방식은 랜덤 백 오프 방식으로 매체에 접근하기 때문에 지연이 발생하여 정해진 시간 내에 전송을 보장할 수 없다는 단점이 있다. [1] 이는 곧 실시간 멀티미디어 트래픽(비디오, 음성 등)의 QoS(Quality Of Service)를 보장할 수 없다는 것을 뜻한다. 또한 IEEF 802.11e 표준 [2]에서 제공하는 QoS 를 위한 EDCA(Enhanced Distributed Channel Access)라는 프로토콜은 제시되어있으나 실제로 구현되어있는 디바이스의 부재로 QoS 를 지원하기가 어렵다. 따라서 무선 랜에서 IEEE 802.11e 를 지원하지 않는 망내 디바이스, 즉 큐가 1 개인 STA, 즉 기본적인 802.11 표준 기술인 DCF 를 사용하는 STA 을 위해서 멀티미디어 트래픽의 실시간 전송을 보장하기 위한 기법을 제시한다.

• Journal of the Institute of Convergence Signal Processing
• /
• v.22 no.1
• /
• pp.38-44
• /
• 2021

Wi-Fi provides some low-power connection solutions that other Bluetooth cannot provide, and at the same time brings many benefits. First, there is a potentially higher data rate: it can reach 230mbps. Wi-Fi coverage is also wider than competitors, and its operating frequency is also 5GHz, which is much less congested than 2.4GHz. Finally, it also supports IP networks, which is important if you want to send data to the cloud without complexity. The 802.11ac standard of the previous generation still accounts for most shipments (80.9%) and revenue (76.2%). However, there is a limit to accepting IoT devices that will continue to increase significantly in the future. To solve this problem, the new Wi-Fi 6 standard is expected to be the solution (IEEE 802.11ax) which is quickly becoming the main driving force of the wireless local area network (WLAN) market. According to IDC market research analysts, in the first quarter of 2020, independent access points (APs) supported by Wi-Fi 6 accounted for 11.8% of shipments, but 21.8% of revenue. In this paper, we have compared and analyzed the IoT connectivity, QoS, and security requirements of devices using Wi-Fi 6 network.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.9C
• /
• pp.905-912
• /
• 2007

This paper proposes an efficient estimation and compensation scheme of IQ imbalance for OFDM-based WLAN systems in the presence of symbol timing error. Since the conventional scheme assumes perfect time synchronization, the criterion of the scheme used to derive the estimation of IQ imbalance is inadequate in the presence of the symbol timing error and the system performance is seriously degraded. New criterion and compensation scheme considering the effect of symbol timing error are proposed. With the proposed scheme, the IQ imbalance can be almost perfectly eliminated in the presence of symbol timing error. The bit error rate performance of the proposed scheme is evaluated by the simulation. In case of 54 Mbps transmission mode in IEEE 802.11a system, the proposed scheme achieves a SNR gain of 4.3dB at $BER=2{\cdot}10^{-3}$. The proposed compensation algorithm of IQ imbalance is implemented using Verilog HDL and verified. The proposed IQ imbalance compensator is composed of 74K logic gates and 6K bits memory from the synthesis result using 0.18um CMOS technology.

• Journal of Multimedia Information System
• /
• v.1 no.2
• /
• pp.111-118
• /
• 2014

The Smart grid refers to the technology that enables efficient usage of electric power by collecting information concerning the power usage and power lines grafting information and communications technology to onto power grids. There are Zigbee, PLC or IEEE 802.11 WLAN MAC as a core technology of the Smart grid, but in this paper, the discussion is focused on the PLC. The PLC is the technology that carries out data communications using power lines and put into practical use in the field of lights or home appliances control recently but PLC-applied communications between electronic devices are rarely seen. For the reason that the PLC uses high-voltage power lines and has a disadvantage of experiencing higher data loss rate caused by the noises produced by going through transformers, the technology is yet to be used in many areas. Nevertheless, the PLC has been studied widely recently in respect that it's the low-cost communication solution for the Smart Metering [1]. Moreover, this technology is emerging as a novel data communication method and discussed as an important technology lately due to the developments of the Smart grid systems and Internet of things (IoT). Thus, in this paper, the results obtained from designing and performing implementation scenario for the PLC-based Smart grid home network system were compared and analyzed with that of IEEE 802.11 WLAN MAC (the foundation technology at Jeju Smart grid Test bed)-based Smart grid home network. Thus, in this paper, OPNET 14.5 PL8, OSI 7 layer, PLC router nodes and PLC nodes had been used for the designing and implementation simulations of both systems. Additionally, QoS was not considered in order to guarantee that all the traffics would not have the same processing priority.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.6 s.336
• /
• pp.39-48
• /
• 2005

This paper proposes a reconfigurable coprocessor for communication systems, which can perform high speed computations and various functions. The proposed reconfigurable coprocessor can easily implement communication operations, such as scrambling, interleaving, convolutional encoding, Viterbi decoding, FFT, etc. The proposed architecture has been modeled by VHDL and synthesized using the SEC 0.18$\mu$m standard cell library. The gate count is about 35,000 gates and the critical path is 3.84ns. The proposed coprocessor can reduced about $33\%$ for FFT operations and complex MAC, $37\%$ for Viterbi operations, and $48\%\~84\%$ for scrambling and convolutional encoding for the IEEE 802.11a WLAN standard compared with existing DSPs. The proposed coprocessor shows Performance improvements compared with existing DSP chips for communication algorithms.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.5B
• /
• pp.365-377
• /
• 2006

We define the incomplete medium sharing system as a multi-channel shared medium communication system where any types of constraints are imposed to the set of channels that may be allocated to any transmitter-receiver node pair. A set of distributed MAC schemes are proposed, all of which are based on the CSMA/CA scheme employed in IEEE 802. 11 WLAN standards. Distributed MAC schemes are proposed in three different forms, which can be differentiated by the number and the location of back-off timers; that is, (1) one timer for all queues destined for different receiver nodes, (2) multiple timers at individual transmission queues, (3) multiple timers for individual channels. Through an extensive set of computer simulations, the performances of the proposed MAC schemes show that the MAC scheme with timers at individual transmission queues outperform the others in terms of throughput and delay for most cases considered. The complexity of the proposed schemes is also compared, and the first scheme obviously turned out to be the simplest, and the complexity of the second and third schemes depends on the number of receiver nodes and the number of channels, respectively.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.5 no.9
• /
• pp.1492-1512
• /
• 2011

Due to multiple hops, mobility and time-varying channel, supporting delay sensitive real-time traffic in wireless local area network-based (WLAN) mesh networks is a challenging task. In particular for real-time traffic subject to medium access control (MAC) layer control overhead, such as preamble, carrier sense waiting time and the random backoff period, the performance of real-time flows will be degraded greatly. In order to support real-time traffic, an efficient adaptive packet scheduling (APS) scheme is proposed, which aims to improve the system performance by guaranteeing inter-class, intra-class service differentiation and adaptively adjusting the packet length. APS classifies incoming packets by the IEEE 802.11e access class and then queued into a suitable buffer queue. APS employs strict priority service discipline for resource allocation among different service classes to achieve inter-class fairness. By estimating the received signal to interference plus noise ratio (SINR) per bit and current link condition, APS is able to calculate the optimized packet length with bi-dimensional markov MAC model to improve system performance. To achieve the fairness of intra-class, APS also takes maximum tolerable packet delay, transmission requests, and average allocation transmission into consideration to allocate transmission opportunity to the corresponding traffic. Detailed simulation results and comparison with IEEE 802.11e enhanced distributed channel access (EDCA) scheme show that the proposed APS scheme is able to effectively provide inter-class and intra-class differentiate services and improve QoS for real-time traffic in terms of throughput, end-to-end delay, packet loss rate and fairness.

• ETRI Journal
• /
• v.31 no.5
• /
• pp.601-603
• /
• 2009

This letter presents a high performance 2.4 GHz two-stage power amplifier (PA) operating in the temperature range from $-30^{\circ}C$ to $+85^{\circ}C$ for IEEE 802.11g, wireless local area network application. It is implemented in InGaP/GaAs hetero-junction bipolar transistor technology and has a bias circuit employing a temperature compensation technique for error vector magnitude (EVM) performance. The technique uses a resistor made with a base layer of HBT. The design improves EVM performance in cold temperatures by increasing current. The implemented PA has a dynamic EVM of less than 4%, a gain of over 26 dB, and a current less than 130 mA below the output power of 19 dBm across the temperature range from $-30^{\circ}C$ to $+85^{\circ}C$.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.10 no.3
• /
• pp.185-192
• /
• 2010

This paper presents a hardware-efficient auto-correlation scheme for the synchronization of MIMO-OFDM based wireless local area network (WLAN) systems, such as IEEE 802.11n. Carrier frequency offset (CFO) estimation for the frequency synchronization requires high complexity auto-correlation operations of many training symbols. In order to reduce the hardware complexity of the MIMO-OFDM synchronization, we propose an efficient correlation scheme based on time-multiplexing technique and the use of reduced samples while preserving the performance. Compared to a conventional architecture, the proposed architecture requires only 27% logic gates and 22% power consumption with acceptable BER performance loss.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.529-530
• /
• 2008

The proposed CMOS Quadrature VCO for WLAN application was designed in TSMC $0.18\;{\mu}m$ RF CMOS technology. The QVCO based on NMOS back-gate as a coupling transistor and switched capacitors array without tail transistors is designed to generate quadrature output signals. The simulated results show that the QVCO core consumed 3.67 mA and 6.6 mW from a 1.8 V supply. The QVCO is tunable between $4.76\;GHz\;{\sim}\;6.35\;GHz$ and has a phase noise lower than -116.8 ㏈c/Hz at 1 MHz offset over the entire tuning range