• Title/Summary/Keyword: IEEE 802.16e/m

Search Result 32, Processing Time 0.021 seconds

Initial Ranging and Detection Enhacement and Time Offset Calculation for Synchronization in 802.16e Systems by Hybrid Detection Method (802.16e 시스템에서 동기화를 위하여 hybrid detection을 이용한 Initial ranging detection 향상과 time offset 계산)

  • Afzal, M Usman;Park, Jong-Min;Cho, Sung-Ho
    • Proceedings of the KIEE Conference
    • /
    • 2008.04a
    • /
    • pp.159-160
    • /
    • 2008
  • Initial Ranging Detection and Synchronization is suggested for IEEE 802.16e OFDMA Systems. However ranging is vulnerable to the channel selectivity and other user's interference at low SNR. This paper presents enhanced ranging scheme that improves ranging detection process using the combine multiple FFT blocks and cope with channel selectivity and other user's interference at low SNR. Based on the ranging detection timing offset is calculated for synchronization.

  • PDF

A Triple-Band Transceiver Module for 2.3/2.5/3.5 GHz Mobile WiMAX Applications

  • Jang, Yeon-Su;Kang, Sung-Chan;Kim, Young-Eil;Lee, Jong-Ryul;Yi, Jae-Hoon;Chun, Kuk-Jin
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • v.11 no.4
    • /
    • pp.295-301
    • /
    • 2011
  • A triple-band transceiver module for 2.3/2.5/3.5 GHz mobile WiMAX, IEEE 802.16e, applications is introduced. The suggested transceiver module consists of RFIC, reconfigurable/multi-resonance MIMO antenna, embedded PCB, mobile WiMAX base band, memory and channel selection front-end module. The RFIC is fabricated in $0.13{\mu}m$ RF CMOS process and has 3.5 dB noise figure(NF) of receiver and 1 dBm maximum power of transmitter with 68-pin QFN package, $8{\times}8\;mm^2$ area. The area reduction of transceiver module is achieved by using embedded PCB which decreases area by 9% of the area of transceiver module with normal PCB. The developed triple-band mobile WiMAX transceiver module is tested by performing radio conformance test(RCT) and measuring carrier to interference plus noise ratio (CINR) and received signal strength indication (RSSI) in each 2.3/2.5/3.5 GHz frequency.

LDPC Decoder for WiMAX/WLAN using Improved Normalized Min-Sum Algorithm (개선된 정규화 최소합 알고리듬을 적용한 WiMAX/WLAN용 LDPC 복호기)

  • Seo, Jin-Ho;Shin, Kyung-Wook
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.18 no.4
    • /
    • pp.876-884
    • /
    • 2014
  • A hardware design of LDPC decoder which is based on the improved normalized min-sum(INMS) decoding algorithm is described in this paper. The designed LDPC decoder supports 19 block lengths(576~2304) and 6 code rates(1/2, 2/3A, 2/3B, 3/4A, 3/4B, 5/6) of IEEE 802.16e mobile WiMAX standard and 3 block lengths(648, 1296, 1944) and 4 code rates(1/2, 2/3, 3/4, 5/6) of IEEE 802.11n WLAN standard. The decoding function unit(DFU) which is a main arithmetic block is implemented using sign-magnitude(SM) arithmetic and INMS decoding algorithm to optimize hardware complexity and decoding performance. The LDPC decoder synthesized using a 0.18-${\mu}m$ CMOS cell library with 100 MHz clock has 284,409 gates and RAM of 62,976 bits, and it is verified by FPGA implementation. The estimated performance depending on code rate and block length is about 82~218 Mbps at 100 MHz@1.8V.

On the Coexistence among WiMAX-TDD, TD-LTE, and TD-SCDMA

  • Cho, Bong-Youl;Kim, Jin-Young
    • Journal of electromagnetic engineering and science
    • /
    • v.10 no.3
    • /
    • pp.104-116
    • /
    • 2010
  • With several advantages such as flexible downlink-to-uplink(DL-to-UL) ratio and flexible spectrum usage, Time Division Duplexing(TDD) is emerging as an alternate to Frequency Division Duplexing(FDD), especially in wireless broadband systems. We already have at least four different TDD systems in the industry: Time Division-Synchronous Code Division Multiple Access(TD-SCDMA), IEEE 802.16e-TDD, IEEE 802.16m-TDD, and Time Division-Long Term Evolution(TD-LTE). A disadvantage of TDD is that tight coordination such as time synchronization between adjacent operators is required to prevent interference between the adjacent TDD systems. In this paper, we investigate coexistence scenarios among the above four well-known TDD systems and calculate spectral efficiency(SE) loss in each scenario. Our findings are that SE loss can be significant if TDD ratios of the adjacent operators are considerably different. However, as long as the TDD ratios of the adjacent operators are similar, configurations in the systems permit perfect time synchronization between the two heterogeneous TDD systems, and the resulting SE loss is zero or reasonably low. We believe that the above findings and the configurations of the TDD systems recommended tominimize SE loss will be helpful for operators who deploy TDD systems in system parameter determination and cross-operator coordination.

Channel Allocation Method for OFDMA Based Contiguous Resources Units with H-ARQ to Enhance Channel Throughput (H-ARQ가 적용된 OFDMA 기반 연접할당자원에 대한 전송률 향상을 위한 채널 할당 방법)

  • Kim, Sang-Hyun;Jung, Young-Ho
    • Journal of Advanced Navigation Technology
    • /
    • v.15 no.3
    • /
    • pp.386-391
    • /
    • 2011
  • CRU (contiguous resource unit) composed of adjacent OFDMA subcarriers is popularly adopted for recently developed cellular communication standards, e.g. IEEE 802.16e/m. If multiple CRUs having different SNR are assigned to a mobile station, and multiple packet streams are independently transmitted by using H-ARQ transmission, an achievable data rate can be varied according to the channel allocation method of re-transmission packets and new transmission packets. In this paper, the optimum channel allocation method for the above stated problem, and several sub-optimum channel allocation methods to reduce the computational complexity of the optimum allocation method are proposed. According to the simulation results, a sub-optimum allocation method assigning a CRU having good SNR to new transmission packet shows marginal performance loss compared with optimum method, however, the computational complexity can be significantly reduced.

A Multi-mode LDPC Decoder for IEEE 802.16e Mobile WiMAX

  • Shin, Kyung-Wook;Kim, Hae-Ju
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • v.12 no.1
    • /
    • pp.24-33
    • /
    • 2012
  • This paper describes a multi-mode LDPC decoder which supports 19 block lengths and 6 code rates of Quasi-Cyclic LDPC code for Mobile WiMAX system. To achieve an efficient implementation of 114 operation modes, some design optimizations are considered including block-serial layered decoding scheme, a memory reduction technique based on the min-sum decoding algorithm and a novel method for generating the cyclic shift values of parity check matrix. From fixed-point simulations, decoding performance and optimal hardware parameters are analyzed. The designed LDPC decoder is verified by FPGA implementation, and synthesized with a $0.18-{\mu}m$ CMOS cell library. It has 380,000 gates and 52,992 bits RAM, and the estimated throughput is about 164 ~ 222 Mbps at 56 MHz@1.8 V.

Implementation of the WiBro RAS(Radio Access Station) Demodulator (IEEE 802.16e 기반 와이브로 기지국용 복조기 설계)

  • Kim, Kyung-Min;Kim, Ji-Ho;Kim, Jae-Seok
    • Proceedings of the IEEK Conference
    • /
    • 2006.06a
    • /
    • pp.643-644
    • /
    • 2006
  • In this paper, WiBro system which is one of the mobile wireless metropolitan area network systems is presented. WiBro is an OFDMA system which has a sub-channelization process unlike conventional OFDM systems. The sub-channelization is the time consuming processing, so a time-efficient hardware architecture is needed. WiBro RAS(Radio Access Station) demodulator is designed with Verilog HDL, and the gate count is 81k using the $0.18{\mu}m$ processing.

  • PDF

A Comparison of the Multipath Error Property In Wireless Location of CDMA and OFDM (CDMA 및 OFDM 기반 무선측위의 다중경로오차 특성 비교분석)

  • Bang Hye-Jung;Lee Jang-Gyu;Jee Gyu-In;Kim Jin-Won;Jung Hee;Hyun Moon-Pil
    • Journal of Institute of Control, Robotics and Systems
    • /
    • v.12 no.10
    • /
    • pp.989-995
    • /
    • 2006
  • This paper shows that the OFDM(Orthogonal Frequency Division Multiplex) system is robust to multipath than CDMA (Code Division Multiple Access) system and it has a strong possibility to be utilized as a supplementing wireless location system for the forthcoming portable internet network. The OFDM system based on IEEE 802.16e is a wireless TDD (Time Division Duplex) OFDMA (Orthogonal Frequency Division Multiple Access) system providing portable internet services in 2.3 GHz frequency band and is scheduled in service in Korea starting in 2006. In this paper, multipath error is calculated using a two-ray model and compared with that of a CDMA system which is following IS-95. The OFDM system shows a maximum multipath error of 3 m while a CDMA system shows a maximum multipath error of 61 m. For this simulation, an early-late technique is used. This technique is usually used to match synchronization of signal in DLL(Delay Lock Loop).

On Optimal Antenna Tilting Angles for Cooperative Transmissions Between Sectors in Cellular Systems (셀룰러 시스템의 섹터 간 협력 전송 시 최적의 안테나 틸팅 각도 결정 방식)

  • Ko, Jin-Seok;Kim, Jae-Won;Park, Jong-Hyun;Sung, Won-Jin
    • Journal of the Institute of Electronics Engineers of Korea TC
    • /
    • v.47 no.7
    • /
    • pp.29-35
    • /
    • 2010
  • The cooperative transmission between sectors in next generation communications standards, e.g., 3GPP LTE-Advanced and IEEE 802.16m, has become an important research issue. Hence methods to decide the optimal antenna tilting angle in cooperative transmission between sectors are needed. This paper proposes methods to decide the optimal antenna tilting angle in cases of non-cooperative and cooperative transmissions between sectors. The proposed methods use an objective function that maximizes the cell average log rate or the cell average rate for users distributed uniformly within the radius of the sector. Also, the objective function which maximizes the cell average rate determined by adaptive modulation and coding (AMC) used in actual cellular systems is considered. When the cell average rate becomes the objective function, the system rate efficiency increases significantly for both cooperative and non-cooperative transmission. When the cell average log rate and the AMC rate become the objective functions, an optimal antenna tilting decision method which effectively increases the efficiency of cell boundary users is discussed.

Efficient Low-Complexity Soft MIMO Symbol Detector for MIMO Systems (다중안테나 통신시스템을 위한 저복잡도 연판정 MIMO 심볼검출기법 연구)

  • Jang, Soo-Hyun;Shin, Dae-Kyo;Yoon, Sang-Hun;Jung, Han-Gyun;Jin, Seong-Keun;Lim, Ki-Taeg
    • The Journal of The Korea Institute of Intelligent Transport Systems
    • /
    • v.16 no.2
    • /
    • pp.153-160
    • /
    • 2017
  • Recently, the demand has continued to increase for higher data rates and improved multimedia services through wireless internet access. In order to increase the data rate and link reliability, 3GPP LTE/A and IEEE 802.16e/m WiMAX systems incorporate MIMO transmission schemes. Since the hardware complexity increases with the number of transmit data streams and mobile devices have limited physical dimensions, an multiple input multiple output (MIMO) ystem with two antennas at both the transmitter and the receiver ($2{\times}2$) is considered to be a possible solution for mobile devices. In this paper, a low-complexity soft output MIMO symbol detector based on Modified-SQRD is proposed for mobile devices with two transmit and two receive antennas.