• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.11
• /
• pp.1954-1959
• /
• 2006

In this paper, we proposed TH UWB-IR medical image transmission system using the IEEE an. 802.15.4a specification in WPAN environment. Also, we analyzed reception performance of wireless medical image transmission system in indoor multi-path fading environment using ITU-R M.1225 channel model. As a results, the proposed scheme can solve the problem of interference from the medical equipment in same frequency band, and minimize the loss due to the indoor multi-path fading environment. Therefore, the transmission with low power usage is possible.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2004.05b
• /
• pp.177-181
• /
• 2004

It is as research about embodiment of MAC algorithm that is point of wireless LAN technology that is radio skill that is receiving present head of a family footlights, and embodied MAC that is algorithm that control modem Rf and host interface to level that existent common use radio AP and send-receive of high speed are available that embody function that is presented to IEEE 802.11 specs using H/W and S/W. When embody actually, tested module that embody actually using module modem and RF part because test is impossible after have common use product. Also, module that embody actually designed, and is expected to be utilized in radio LAN system construction of high speed late considering CRC and FCS ewer on channel.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.2
• /
• pp.432-438
• /
• 2011

This paper describes an analysis of optimal design conditions of multi-mode LDPC(low density parity check) decoder which supports three block lengths (648, 1296, 1944) and four code rates (1/2, 2/3, 3/4, 5/6) for IEEE 802.11n WLAN system. A fixed-point model of LDPC decoder, which adopts min-sum algorithm and layered decoding scheme, is implemented using Matlab. From fixed-point simulation results for various bit-width parameters such as internal bit-width, integer/fractional part bit-widths, optimal design conditions and decoding performance of LDPC decoder are analyzed.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.486-489
• /
• 2010

This paper describes a layered LDPC decoder which supports block length of 1,944 bits and code rate 1/2 for IEEE 802.11n WLAN standard. To reduce the hardware complexity, the min-sum algorithm and layered architecture is adopted. A novel memory reduction technique suitable for min-sum algorithm reduces memory size by 75% compared with conventional method. The designed processor has 200,400 gates and 19,400 bits memory, and it is verified by FPGA implementation. The estimated throughput is about 200 Mbps at 120 MHz clock by using Xilinx Virtex-4 FPGA device.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.798-801
• /
• 2010

This paper describes an efficient architecture for LDPC(Low-Density Parity Check) decoder, which supports three block lengths (648, 1,296, 1,944) of IEEE 802.11n standard. To minimize hardware complexity, the min-sum algorithm and block-serial layered structure are adopted in DFU(Decoding Function Unit) which is a main functional block in LDPC decoder. The optimized H-ROM structure for multi block lengths reduces the ROM size by 42% as compared to the conventional method. Also, pipelined memory read/write scheme for inter-layer DFU operations is proposed for an optimized operation of LDPC decoder.

• Journal of Advanced Navigation Technology
• /
• v.6 no.4
• /
• pp.296-305
• /
• 2002

This paper suggests the parameters of the requirement conditions of minimum performance for a RF transceiver system design from the specifications of IEEE Std 802.11b and IEEE Std 802.11a. It has yielded the requirement conditions of minimum performance in the design process due to these parameters. A RF transceiver system is simulated by using Agilent ADS(Advanced Design System) after selecting the components of optimal conditions to fabricate the RF transceiver system. The results of both the analysis and the simulation will be used for a real wireless LAN design.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.2
• /
• pp.261-266
• /
• 2009

We analyze the performances of the DCF, which is the medium access control protocol of IEEE 802.11 WLAN, assuming normal traffic condition. There have been much less research efforts under the normal condition than those under the saturated one. This paper proposes an analytical method of approximating the transmission attempt rate under normal condition as proportional to that under saturated condition. In result, we show that we can obtain the transmission attempt rate and the packet collision probability which quickly converge using iterative computations of relatively simple equations, and using these results we derive the network throughput and medium access delay. Numerical results show that our method is much less complex than those based on the Markov Chain while it can predict the performances quite accurately.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.11
• /
• pp.2185-2191
• /
• 2007

The traditional sensor network is composed of the cable and the sensor of high price, when collecting a sensing data, there is a weak point which is not pliability. WSN uses the equipment of low price, it will be able to collect the data which is diverse from various node. In this paper we composed coal mining topology which used IEEE802.15.4 MAC in Korea Coal Corporation site. We proposed models for the mobility support of the work manager from the coal mining, we selected the optimum model through simulation experiments. When applying the WSN in the Korea Coal Corporation and other mines, this result can be used as a basis.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2007.11a
• /
• pp.917-920
• /
• 2007

무선 Ad-hoc 네트워크에서는 주로 IEEE 802.11 MAC 프로토콜을 이용한다. IEEE 802.11 MAC 프로토콜은 제어 메시지인 RTS-CTS를 통해서 채널 예약을 하고 데이터를 전송하는 방식으로 모든 통신에 Omni-directional 안테나를 이용하여 전송한다. 본 논문에서는 기존 IEEE 802.11 MAC 프로토콜보다 성능을 향상시키기 위해서 directional 안테나를 이용한 MAC 프로토콜을 사용한다. Directional 안테나를 사용한 MAC 프로토콜은 IEEE 802.11 MAC 프로토콜에 비해서 Spatial Reuse를 증가함으로서 채널 자원을 더욱 효율적으로 사용하는 것이 가능하다. 또한 Directional 안테나의 사용은 안테나의 지향성에 따른 안테나 이득 및 전송 범위의 증가 그리고 전송 범위를 Omni-directional 안테나와 동일하게 적용할 경우에는 저 전력 통신이 가능하다는 장점을 가지고 있다. 그러나 Directional 안테나의 사용은 IEEE 802.11 MAC보다 좋은 성능을 갖기는 하지만 새로운 문제들이 발생한다. 이러한 문제들로는 New Hidden Terminal, Deafness, Capture, 그리고 위치 인식에 관련된 문제들이 발생한다. 본 논문에서서 위에서 언급한 Directional 안테나의 이점과 그리고 문제점에 대해서 설명하고, 이러한 문제들 중에 Deafness 문제를 완화시킬 수 있는 방법을 제안한다. 그리고 QualNet 4.0을 이용한 시뮬레이션을 통해서 제안된 프로토콜의 성능을 평가한다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2009.11a
• /
• pp.181-182
• /
• 2009

본 논문에서는 IEEE 802.15.4a 근거리 무선 네트워크를 이용하여 다중 이동 로봇을 사용자 휴대 단말을 이용하여 실시간으로 편리하게 제어하기 위한 플랫폼을 설계하고 그 기본기능을 검증한다. 제안한 원격제어 플랫폼은 IEEE 802.15.4a 기반의 최초의 원격제어 플랫폼으로서 그 의의를 가지며, 자동 스페이싱(auto-spacing)을 기반한 다중 로봇 그룹이동과 IEEE 802.15.4a의 거리측정 기능과 초음파 및 자이로센서를 이용한 상대각측정 기능을 이용한 협동위치인식(cooperative localization) 기능을 제공하는데 기존 기법들과의 차별성이 존재한다.