• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.6
• /
• pp.995-1000
• /
• 2016

Minimum Energy Performance Standard(MEPS) has been adapted in Korea since 2008. For at least 37 kW, IE3 efficiency class motors are now mandatory in Korea. IE4 level regulation is expected in a few years. Foreign companies are already selling IE4 class motors in the market, and the discussions on IE5 have already started. The efficiency standard of variable speed motors is scheduled for publication shortly. Recently, discussions are now beginning to prepare for IE5 in Korea. In this paper, author reviews the policies associated with a high efficent electric motors by reference to both domestic and international standards, and reviews the research direction to prepare for IE5.

• Journal of Power Electronics
• /
• v.14 no.5
• /
• pp.842-851
• /
• 2014

High efficiency standards are slowly being introduced with IE3 efficiency levels shortly becoming compulsory in many countries; IE4 efficiency levels being developed for future implementation. In this paper a review is carried out of the IE 60034-30 standard which covers standard line-start induction motors. Some design techniques that can be used to increase efficiency in order to meet the IE4 standards are discussed. This standard is now being replaced by the IE60034-30-1 standard which extends to other line start motors and also IE 60034-30-2 is being introduced to cover variable speed drives in order to address developing technology. The conclusion is that IE4 standards are obtainable but careful design is needed to reach this. Examples from the literature are given.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.13 no.3
• /
• pp.171-180
• /
• 2015

This study was performed on the removal of Cs, one of the main high- radioactive nuclides contained in the high-radioactive seawater waste (HSW), by adsorption with IE911 (crystalline silicotitanate type). For the effective removal of Cs and the minimization of secondary solid waste generation, adsorption of Cs by IE911 (hereafter denoted as IE911-Cs) was effective to carry out in the m/V (ratio of absorbent weight to solution volume) ratio of 2.5 g/L, and the adsorption time of 1 hour. In these conditions, Cs and Sr were adsorbed about 99% and less than 5%, respectively. IE911-Cs could be also expressed as a Langmuir isotherm and a pseudo-second order rate equation. The adsorption rate constants (k₂) were decreased with increasing initial Cs concentrations and particle sizes, and increased with increasing ratios of m/V, solution temperatures and agitation speeds. The activation energy of IE911-Cs was about 79.9 kJ/mol. It was suggested that IE911-Cs was dominated by a chemical adsorption having a strong bonding form. From the negative values of Gibbs free energy and enthalpy, it was indicated that the reaction of IE911-Cs was a forward, exothermic and relatively active at lower temperatures. Additionally, the negative entropy values were seen that the adsorbed Cs was evenly distributed on the IE911.

• Journal of Sericultural and Entomological Science
• /
• v.40 no.2
• /
• pp.111-116
• /
• 1998

To construct transformed Bm5 cells, Autographa californica nuclear polyhedrosis virus (AcNPV)IE1 gene, an immediate early viral gene was firstly used in this study. AcNPV IE1 gene, which shares on 95.3% uncleotide sequence homology with Bombyx mori nuclear polyhedrosis virus (BmNPV) IE1 gene, was isolated and cloned into pBluescript. Neomycin gene from pKO-neo was inserted under the control of the IE1 promoter to yield pAcIE1-neo. The plasmid pAcIE1-neo was transfected into Bm5 or Sf9 cells, and neomycin-resistant cells were selected in TC100 medium containing 10% fetal bovine serum (FBS) and 1 mg/$m\ell$ G418 for two weeks. Individual clones were picked and each was amplified for further characterization. The genomic DNA from neomycin-resistnt cells was isolated and characterized by PCR using AcNPV IE1 gene-specific primers and by Southern blot analysis using neomycin gene probe. We concluded that AcNPV IE1 gene was functional in B. moridrived Bm5 cells as well as Spodaptera frugiperda-derived Sf9 cells to produce stably-transformed insect cells.

• Journal of Advanced Navigation Technology
• /
• v.5 no.1
• /
• pp.74-84
• /
• 2001

Recently a new algorithm which combines advantages of the IMM and IE methods has been suggested. The combined-IMM/IE algorithm could improve the performance to some extent. However, the problem of large increase of tracking error near the maneuver detection due to the sudden maneuver input has not been solved. In this paper, we propose two schemes which can resolve this limitations of combined-IMM/IE algorithm. For illustrations of the performance of the proposed methods. Monte-Carlo simulations are carried out and the results are analyzed.

• Journal of electromagnetic engineering and science
• /
• v.19 no.1
• /
• pp.6-12
• /
• 2019

An IE-FFT algorithm is implemented and applied to the electromagnetic (EM) solution of perfect electric conducting (PEC) scattering problems. The solution of the method of moments (MoM), based on the magnetic field integral equation (MFIE), is obtained for PEC objects with closed surfaces. The IE-FFT algorithm uses a uniform Cartesian grid to apply a global fast Fourier transform (FFT), which leads to significantly reduce memory requirement and speed up CPU with an iterative solver. The IE-FFT algorithm utilizes two discretizations, one for the unknown induced surface current on the planar triangular patches of 3D arbitrary geometries and the other on a uniform Cartesian grid for interpolating the free-space Green's function. The uniform interpolation of the Green's functions allows for a global FFT for far-field interaction terms, and the near-field interaction terms should be adequately corrected. A 3D block-Toeplitz structure for the Lagrangian interpolation of the Green's function is proposed. The MFIE formulation with the IE-FFT algorithm, without the help of a preconditioner, is converged in certain iterations with a generalized minimal residual (GMRES) method. The complexity of the IE-FFT is found to be approximately $O(N^{1.5})$and $O(N^{1.5}logN)$ for memory requirements and CPU time, respectively.

• Korean Journal of Veterinary Service
• /
• v.25 no.4
• /
• pp.333-346
• /
• 2002

We previously reported that the equine herpesvirus type 1(EHV-1) immediate-early protein(IE protein) physically interacts with the general transcription factor human TFIIB(Jang et al, J Virol 75：10219-10230, 2001). The interaction between the IE protein and TFIIB is necessary for the IE protein to efficiently transactivate the early TK and late IR5 EHV-1 promoters. A panel of deletion and truncation mutants of the TFIIB gene was constructed and employed in protein-binding assays to map the IE protein-binding domain within TFIIB. Evidence is presented that the first direct repeat of TFIIB interacts specifically with the EHV-1 IE protein.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.2
• /
• pp.803-808
• /
• 2017

Minimum Energy Performance Standard(MEPS) has been adapted in Korea since 2008. The efficiency standard of variable speed motors is scheduled for publication shortly. In this paper, author reviews the technical trends associated with a high efficient electric motors by reference to research papers, and reviews the research direction to prepare for IE5. This paper provides an overview of high efficiency motors. Various applications have been covered.

• The Journal of Korean Society of Virology
• /
• v.28 no.3
• /
• pp.267-274
• /
• 1998

Human cytomegalovirus (HCMV) has the ability to activate the expression of many viral and cellular genes. Among various viral proteins, the immediate early proteins (IE1-72kDa, IE2-86kDa) have been known to be potent transactivators. The product of c-jun proto-oncogene is important in cell activation and differentiation. Here, we tried to find out if the IE could activate the c-jun promoter and also tried to identify the responsible sequence elements in the c-jun activation by IE1-72kDa. We found HCMV IE expression transactivated the c-jun promoter in human embryonal lung fibroblasts (HEL). The activation fold by IE1-72kDa, IE2-86kDa and IE2-55kDa was 23, 35, and 5, respectively. When the expression of each IE was combined, it showed synergism. Expression of (IE1-72kDa + IE2-86kDa) and (IE1-72kDa + IE2-86kDa + IE2-55kDa) resulted in 131 and 162 fold increase, respectively. The c-jun promoter region between -117 and -59 contains binding sites for the transcription factors Spl, CAAT, AP-l like (ATF/CREB), and MEF2. Transient expression assays were performed using various reporter plasmids containing the c-jun promoter-regulatory region linked to the luciferase gene and a plasmid expressing HCMV IE1 gene. Deletional and point mutational analysis showed that the sequence between -225 to -160 and the CTF binding site were involved in the up-regulation of c-jun promoter.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.28 no.3
• /
• pp.37-46
• /
• 2024

This study investigates the evolution of concrete damage due to chloride-induced steel corrosion through Impact-echo (IE) testing. Three reinforced concrete specimens, each measuring 1500 mm in length, 400 mm in width, and 200 mm in thickness, were fabricated using three concrete mixture proportions of blended cement types: ordinary Portland cement, ground granulated blast-furnace slag and fly ash. Steel corrosion in the concrete was accelerated by impressing a 0.5 A current following a 35-day cycle of wet-and-dry saturation in a 3% NaCl solution. Initial IE data collected during the saturation phase showed no significant changes, indicating that moisture had a minimal impact on IE signals and highlighting the slow progress of corrosion under natural conditions. Post-application of current, however, there was a noticeable decline in both IE peak frequency and the P-wave velocity in the concrete as the duration of the impressed current increased. Remarkably, progressive monitoring of IE proves highly effective in capturing the critical features of steel-corrosion induced concrete deterioration, such as the onset of internal damages and the rate of damage propagation. These results demonstrate the potential of progressive IE data monitoring to enhance the reliability of diagnosing and prognosticating the evolution of concrete damage in marine environment.