• Korean Journal of Construction Engineering and Management
• /
• v.24 no.1
• /
• pp.40-50
• /
• 2023

Quality control (QC) is an essential work for the successful construction project execution. Recently, robust application of ICT to the QC tasks leads to utilizing innovative technologies and equipment. However, overall planing of QC works needs to take place before applying new technologies to each and individual QC task. The objectives of this research involve developing a database and an algorithm that identifies QC tasks and related information upfront. In addition, the researchers developed a methodology to generate inspection tasks in conjunction with construction work tasks. The Korean Ministry of Land and Transportation provides standard supervision checklists. They were classified based on criteria of inspection items, methods, period and the scope. Reinforced concrete work was selected as a case study for validation of the method. This framework can function when planing construction tasks with any type of planning tools and innovative technologies. The researchers expect this framework may contribute to various construction projects when developing QC plans and tasks with applicable technologies.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.44 no.2
• /
• pp.203-214
• /
• 2024

Ports often suffer pavement damage due to soft ground and heavy equipment operations, leading to issues such as differential settlement and cracks. In this study, we developed port concrete blocks and applied them to a port in two configurations to figure out settlement characteristics. Falling weight deflectometer (FWD) tests on asphalt pavement and block pavements were conducted to figure out deflection and bearing capacity. The block pavement with the cement treated base showed improved bearing capacity with the port operation since lower settlements were detected than asphalt pavement. In the cement treated base, the relative deflection ratio to asphalt concrete pavement was less than 1, indicating enhanced bearing capacity. LiDAR measurements identified multiple settlements in the crushed-stone base due to surface loads after construction. Both relative deflection ratio and LiDAR measurements suggested that block pavement can be widely applied to various port sites with its applicability and bearing capacity of cement-treated base.

• The Journal of the Korea Contents Association
• /
• v.18 no.6
• /
• pp.353-363
• /
• 2018

According to the Digi Capital forecast, the global augmented reality market is expected to grow rapidly by 2020 to reach 150 billion dollars. In particular, high value added effects are expected in education. As ICT advances, digital textbooks are also leading innovative education by adding interactive functions. Advanced countries, including the U.S., are already using digital textbooks that use augmented reality technology in their classes. In line with this technological outlook, the ministry proposed a design plan that applies augmented reality technology to middle school science 1 digital textbooks. A study on middle school science 1 digital textbooks showed that each unit provided short videos. In addition, an investigation into the augmented reality class case showed that it was difficult to establish experimental equipment, lack of equipment (devices), and 3D design contents that did not continue despite the excellence of learning effects. Based on this demand, we designed an augmented reality scenario and system configuration to be applied to the instrument-specific experiments of middle school science 1 digital textbooks to explore and explore the contents of augmented reality by students. This research will replace the dangerous experiments and time consuming experiments for teachers and students by applying augmented reality to science subjects that are essential for the development of digital textbooks.

• Journal of Computational Design and Engineering
• /
• v.3 no.4
• /
• pp.363-369
• /
• 2016

Cyber Physical System (CPS) and Internet of Things (IoT) are hot objects of interest as an extension of the embedded system. These interactive products and systems contain Mobile Devices which are most popular and used most frequently. Also these have been widely used from the control of the Nuclear Power Control System (NPCS) to IoT Home Service. Information & Communication Technology (ICT) topics of trend fused-complex current Information Technology (IT) and Communication Technology (CT) are closely linked to real space and virtual space. This immediately means the arrival of the ultra-connected society. It refers to a society in which various objects surrounding the human innovation and change in the social sector are expected through the connection between the data which are to be generated. In addition, studies of Tool-kit for the design of such systems are also actively pursued. However, only increased cooperation and information sharing between the physical object consists of a variety of machinery and equipment. We have taken into consideration a number of design variables of the high barriers to entry about the product. In this study, It has been developed a Web-based collaboration framework which can be a flexible connection between macroscopically virtual environment and the physical environment. This framework is able to verifiy and manage physical environments. Also it can resolve the bottlenecks encountered during the base expansion and development process of IoT (Internet of Things) environment.

• Journal of The Korean Association of Information Education
• /
• v.19 no.2
• /
• pp.167-174
• /
• 2015

A recent increase of interests on the influence of 3D printing and low prices of 3D printers makes a high possibility of 3D printer adoption as a educational equipment in public education settings. The Ministry of Science, ICT and Future Planning and Ministry of Trade, Industry and Energy proposed '3D printing industry development strategies', and had pilot schools to include understanding of 3D printing concepts and practices in the primary, secondary and high schools' curriculum. However, even if 3D printers were provided in educational settings, the research on educational content and methods to properly react to this change is very limited. Therefore, this study reviewed various 3D modeling software because a modeling skill is a prerequisite skill to use 3D printers, and proposed a creative design spiral based teaching content that can be incorporated in elementary school contexts.

• Journal of Information Technology and Architecture
• /
• v.11 no.1
• /
• pp.53-62
• /
• 2014

The research tries to find appropriate nations and cities of the international supporting centers according to Korean firms' requests. It also tries to find out proper designs of governance structure and strategic and operational control system of the center. Two methods are used to find out Korean firms' requests. One is the expert interviews and the other is the questionnaire survey. The email survey is sent to 120 firms of IT service, package software, telecom facilities and broadcasting equipment industries. Their opinions in addition to interview results are used as a basis of selecting potential regions for new centers and types of their services. According to survey results, southeast asia is the most preferred region and Indonesia, Vietnam, Thailand, Malaysia and Singapore are selected as potential nations for a location of the center in southeast asia. However, the survey result is not fully agreed with the interviewees' opinions. The interviewees tell that there are not much demand in nations with low purchasing power and low IT industry level. That is, Indonesia and Vietnam are not proper places for the centers.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.5
• /
• pp.109-120
• /
• 2017

It is important to estimate objectively in the driving test. Especially, the driving test is examined by totally driving ability, rule observation and situational judgement. For this, a grading automation system for driving test was presented by using GPS, sensor data and equipment operation informations. This system is composed of vehicle mounted module, automatic grading terminal, data controller, data storage and processing server. The vehicle mounted module gathters sensor data in the car. The terminal performs automatic grading using the received sensor data according the driving test criterion. To overcome the misposition of vehicle in the map due to GPS error, we proposed the automatic grading system by map matching method, path deviation and return algorithm. In the experimental results, it was possible to grade automatically, display the right position of the car, and return to the right path under 10 seconds when the vehicle was out of the shadow region of the GPS. This system can be also applied to the driving education.

• Journal of Forest and Environmental Science
• /
• v.34 no.4
• /
• pp.304-312
• /
• 2018

This study investigates to identify the impact factors of timber production cost on the relationship between production cost components and revenues generated by evaluating the entire timber supply chain. In this research, selected 13 logging zones as target areas and classified 14 forest production cost factors, six groups. Additionally, established 13 externalenvironmental factors with related stakeholders and forestry experts. And the BCR (Benefit Cost Ratio) method was then used to analyze the economics of each zone. Filled up a checklist and rated using 5 point scale for each target region, and extracted major cost factors for the production economy of the item. The analysis of major cost factors in the timber production revealed that wood grab equipment usage fee was the first ranked and forest trees purchase cost was ranked in the $2^{nd}$Also, the $3^{rd}$ranking was logging expenses, and transport cost, which accounted for 84% of the total cost, was ranked in the $4^{th}$. In addition, the rock land ratio, slope, timber payment (forest trees purchase cost), special timber, ratio of timber, DBH (Diameter at Breast Height), and mixed forest ratio were the factors that most affected the timber supply chain cost.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.2
• /
• pp.189-197
• /
• 2013

With the trend of technological advances in electronic communications and the advent of ubiquitous environments, the density of existing electronic equipment in the surroundings is increasing significantly. It is hence great importance to study the numerically efficient and fast algorithm for complex and large environments to identify their electromagnetic compatibility and interference characteristics of equipments installed in those structure. This paper introduces a statistical-based power balance method(PWB) for the analysis of these problems and considers its practical utility. The 2-dimensional lossy rectangular cavity was numerically revisited to clarify its relationship with the classical deterministic analysis solutions based on the Maxwell's equation. It can be shown that the statistical assumptions and analysis results from the power balance method correspond to the volume average over the realistic deterministic domain. This statistical power balance approach should be a sufficiently practical alternative to the electromagnetic problem of complex and large environment since it is apparent that the full-wave analysis methods have some severe limits of its computational burdens under the situation of complex and large environment.

• Journal of Society of Preventive Korean Medicine
• /
• v.21 no.2
• /
• pp.69-78
• /
• 2017

Objectives : This study aims to analyze the public investment for Korean Medicine R&D to facilitate the future strategic planning. Methods : All government supported research projects for Korean Medicine that were invested in 2009, 2012, 2015 were searched in the NTIS (National Science & Technology Information Service) Database. Research budgets were analyzed by government departments, R&D agents, R&D steps, and research fields. CAGR (Compound Annual Growth Rate) was derived from each Korean Medicine research field. Differences of research budgets among research fields were tested using Chi square analysis. Results : A total of 891 projects supported in 2009, 2012, and 2015 was analyzed. The amount of research budgets has increased, from 49,839 million won in 2009 to 106,536 million won in 2015 showing 13.5% of CAGR. Ministry of Science, ICT, and Future Planning, and Ministry of Health and Welfare were the biggest sponsors in Korean Medicine R&D. Chi square analysis showed that, in this period, there were statistically significant differences of research budgets in Korean Medicine technology equipment field and infrastructure field. Conclusions : To diversify the Korean Medicine R&D, unequal research funding among government departments should be relieved, and virtuous cycle of Industry-University-Institute Collaboration in Korean Medicine need to be built.