• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 추계학술대회 논문집
• /
• pp.132-136
• /
• 2003

Generally, PM BLDC drive system is necessary that the three Hall-ICs evenly be distributed around the stator circumference and encoder be installed in case of the 3 phase motor. So, the Hall-ICs are set up in this motor to detect the main flux from the rotor, and the output signal from Hall-ICs is used to drive a power transistor to control the winding current. However, instead of using three Hall-ICs and encoder, we used only two Hall-ICs for the permanent magnet rotor position and for the speed feedback signals, and also for a micro controller of 16-bit type (80C196KC) with the 3 phase PM BLDC whose six stator and two rotor designed. Two Hall-IC Hc and $H_B$ are placed on the endplate at 120 degree intervals, and with these elements, we estimated information of the others phase in sequence through a rotating rotor.

• 한국전기전자재료학회논문지
• /
• 제29권3호
• /
• pp.131-134
• /
• 2016

This research was analyzed thermal characteristics that was appointed disadvantage when smart LED driver ICs was packaged and we applied extracted thermal characteristics for optimal layout design. We confirmed reliability of smart LED driver ICs package without additional heat sink. If the package is not heat sink, we are possible to minimize package. For extracting thermal loss due to overshoot current, we increased driver current by two and three times. As a result of experiment, we obtained 22 mW and 49.5 mW thermal loss. And we obtained optimal data of 350 mA driver current. It is important to distance between power MOSFET and driver ICs. If thhe distance was increased, the temperature of package was decreased. And so we obtained optimal data of 3.7 mm distance between power MOSFET and driver ICs. Finally, we fabricated real package and we analyzed the electrical characteristics. We obtained constant 35 V output voltage and 80% efficiency.

• Nuclear Engineering and Technology
• /
• 제53권10호
• /
• pp.3319-3326
• /
• 2021

As a form of industrial control systems (ICS), nuclear instrumentation and control (I&C) systems have been digitalized increasingly. This has raised in turn cyber security concerns. Cyber security for ICS is important because cyber-attacks against ICS can cause not only equipment damage and loss of production but also personal and public safety hazards unlike in general IT environments. Numerous risk analyses have been carried out to enhance the safety of ICS and recently, many studies related to the cyber security of ICS are being conducted. Many existing risk analyses and cyber security studies have considered safety and cyber security separately. However, both safety and cyber security perspectives should be considered when analyzing risks for complex and critical ICS facilities such as nuclear power plants (NPPs). In this paper, the STPA-SafeSec methodology is selected to consider both safety and security perspectives when performing a risk analysis for NPPs in order to assess impacts on the safety by cyber-attacks against the digital I&C systems. The STPA-SafeSec methodology was applied to a test-bed system that simulates a condensate water (CD) system in an NPP. The process of the application up to the development of mitigation strategies is described in detail.

• Environmental Engineering Research
• /
• 제14권1호
• /
• pp.41-47
• /
• 2009

Column experiments were performed in this study to investigate humic acid adhesion to iron oxide-coated sand (ICS) under different experimental conditions including influent humic acid concentration, flow rate, solution pH, and ionic strength/composition. Breakthrough curves of humic acid were obtained by monitoring effluents, and then column capacity for humic acid adsorption ($C_cap$), total adsorption percent (R), and mass of humic acid adsorbed per unit mass of filter media ($q_a$) were quantified from these curves. Results showed that humic acid adhesion was about seven times higher in ICS than in quartz sand at given experimental conditions. This indicates that humic acid removal can be enhanced through the surface charge modification of quartz sand with iron oxide coating. The adhesion of humic acid in ICS was influenced by influent humic acid concentration. $C_cap$ and $q_a$ increased while R decreased with increasing influent humic acid concentration in ICS column. However, the influence of flow rate was not eminent in our experimental conditions. The humic acid adhesion was enhanced with increasing salt concentration of solution. $C_cap$, $q_a$ and R increased in ICS column with increasing salt concentration. On the adhesion of humic acid, the impact of CaCl2 was greater than that of NaCl. Also, the humic acid adhesion to ICS decreased with increasing solution pH. $C_cap$, $q_a$ and R decreased with increasing solution pH. This study demonstrates that humic acid concentration, salt concentration/composition, and solution pH should be controlled carefully in order to improve the ICS column performance for humic acid removal from water.

• 전력전자학회논문지
• /
• 제9권4호
• /
• pp.311-318
• /
• 2004

최근 각종 산업기기 및 자동화기기에는 회전자가 영구자석으로 구성된 브러시리스 전동기의 사용이 증가하고 있다. 그러나 회전자가 영구자석으로 이루어진 BLDC 전동기의 경우 회전자 위치 판별 센서는 필수 요소이다. 그러나 센서(엔코더, 레졸버등)를 사용할 경우 크기 증가, 비용 상승 등의 원인으로 작용한다. 따라서 본 논문에서는 PM BLDC 전동기의 속도제어를 수행함에 있어 기존의 엔코더와 Hall-IC 3개를 이용하지 않고, 두개를 이용하여 회전자의 위치를 판별함과 동시에 속도 센서를 대신하여 사용할 수 있는 방법을 제안하였다. 그 결과 성능은 동일하고, 구동회로의 크기와 제조 단가를 낮출 수 있는 효과를 얻었다.

• Journal of Periodontal and Implant Science
• /
• 제45권1호
• /
• pp.23-29
• /
• 2015

Purpose: This study was conducted to compare the cumulative survival rates (CSRs) and the incidence of postloading complications (PLCs) between a bone-level internal connection system (ICS-BL) and an external connection system (ECS). Methods: The medical records of patients treated with either a ICS-BL or ECS between 2007 and 2010 at Asan Medical Center were reviewed. PLCs were divided into two categories: biological and technical. Biological complications included >4 mm of probing pocket depth, thread exposure in radiographs, and soft tissue complications, whereas technical complications included chipping of the veneering material, fracture of the implant, fracture of the crown, loosening or fracture of the abutment or screw, loss of retention, and loss of access hole filling material. CSRs were determined by a life-table analysis and compared using the log-rank chi-square test. The incidence of PLC was compared with the Pearson chi-squared test. Results: A total of 2,651 implants in 1,074 patients (1,167 ICS-BLs in 551 patients and 1,484 ECSs in 523 patients) were analyzed. The average observation periods were 3.4 years for the ICS-BLs and 3.1 years for the ECSs. The six-year CSR of all implants was 96.1% (94.9% for the ICS-BLs and 97.1% for the ECSs, P=0.619). Soft tissue complications were more frequent with the ECSs (P=0.005) and loosening or fracture of the abutment or screw occurred more frequently with the ICS-BLs (P<0.001). Conclusions: Within the limitations of this study, the ICS-BL was more prone to technical complications while the ECS was more vulnerable to biological complications.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2016년도 춘계학술대회
• /
• pp.75-76
• /
• 2016

무선통신 시스템에서 ICS 중계기는 Donor와 Service 사이의 거리를 많이 이격시켜야 높은 격리도를 확보할 수 있는 단점을 가지고 있다. 본 논문에서는 음영지역을 해소하여 통화권 영역을 확대하기 위해 높은 격리특성을 갖는 ICS(Interference Cancellation System)중계기 일체형 안테나를 설계하고 제작 및 측정을 통하여 성능을 평가하였다. 대역폭과 이득은 주방사 패치 및 기생 패치의 크기, 스터브 길이 등을 조정하여 구현하였다. 본 안테나는 CDMA 이동통신 주파수인 824~894 MHz 대역에서 이득은 3 dBi 이상, 격리도는 -56 dB 이하의 양호한 특성을 나타내었다.

• 정보보호학회논문지
• /
• 제18권1호
• /
• pp.139-148
• /
• 2008

정보기술의 발전은 비즈니스 환경의 변화는 물론 대형 산업 시설의 자동화에 많은 변화를 가져왔다. 전력, 수자원, 에너지, 교통, 통신, 등은 국가의 안보와 국민 생활의 안정 그리고 국가 경제발전의 기반을 형성하는 국가의 주요 기반시설이며 이들 모두 산업제어 시스템에 의해 통제되고 있다. 또 비즈니스 환경의 변화는 조직의 모든 시스템을 통합하고 있어 경영정보시스템과 산업제어 시스템의 통합이 이루어지고 있다. 이에 따라 산업제어 시스템의 표준화와 개방형 시스템으로 전환이 이루어지고 있어 더욱 보안의 중요성이 커지고 있다. 제어시스템 보안에 대한 연구가 기술, 관리, 환경 등 다양한 분야에서 추진되고 있다. 그럼에도 제어시스템 감사에 대한 연구는 아직 미약하다. 정부는 최근 정부 및 주요 공공 시스템에 대한 정보시스템 감리를 의무화하여 안정성, 효율성, 효과성을 평가하고 있다. 또 주요정보통신기반시설에 대해서는 취약점 분석을 하고 그 개선 작업을 하도록 의무화하고 있다. 그럼에도 제어시스템에 대한 감리를 하지 않고 있고 제어시스템에 대한 보안 아키텍처나 감리 프레임워크도 준비되어 있지 않다. 본 연구는 제어시스템 감리를 위한 정보보안 아키텍처와 정보보안 감리 프레임워크를 제시하여 감리의 기반을 마련하였다.

• Clinical and Experimental Pediatrics
• /
• 제52권7호
• /
• pp.811-817
• /
• 2009

목 적 : 소아 천식에서 흡입용 스테로이드의 장기간 사용이 골밀도와 골대사에 미치는 영향에 대해 알아보고자 하였다. 방 법 : 고려대학교 안암병원 소아청소년과에서 천식으로 진단되어 최소 6개월 이상 ICS를 사용 중인 만 6세에서 12세 사이의 환아(ICS군: 26명)를 대상으로 하였다. 대조군으로 연령 및 성별이 일치하면서 LTRA만을 사용한 천식 환아(LTRA군: 15명)와 골밀도에 영향을 미칠 만한 기저 질환이 없는 정상 소아(정상군: 30명)를 선정하여 이중 에너지 X-선 흡수법으로 요추와 대퇴골 상부에서 골밀도를 측정하고, 골대사에 대한 영향은 혈청 골-특이 알칼리인산효소(BALP)를 측정하여 평가하였다. 결 과 : ICS군의 요추 골밀도는 $0.57{\pm}0.07g/cm^2$으로 LTRA군($0.55{\pm}0.06g/cm^2$) 및 정상군($0.58{\pm}0.07g/cm^2$)과 유의한 차이를 보이지 않았고(P=0.254), 대퇴골 상부의 골밀도도 ICS군에서 $0.70{\pm}0.07g/cm^2$로 LTRA군($0.66{\pm}0.06g/cm^2$)및 정상군($0.70{\pm}0.07g/cm^2$)과 유의한 차이가 없었다(P=0.297). 골밀도 Z-점수 또한 세 군에서 유의한 차이를 보이지 않았다(요추: ICS군 $-0.22{\pm}0.78$ vs. LTRA군 $-0.16{\pm}0.47$ vs. 정상군 $-0.19{\pm}0.83$, P=0.963; 대퇴골 상부: ICS 군 $-0.12{\pm}0.93$ vs. LTRA군 $0.16{\pm}0.59$ vs. 정상군 $-0.04{\pm}0.67$, P=0.560). 혈청 BALP 농도는 ICS군과 LTRA군에서 정상군에 비해 유의하게 높은 소견을 보였다(P=0.021). ICS군에서 ICS의 최근 6개월간 사용량, 총 축적 용량, 사용 기간, 투여 시작 연령과 골밀도 Z-점수는 유의한 상관관계를 보이지 않았다(모두 P>0.05). 결 론 : 천식 환아에서 저용량의 ICS 사용은 골밀도에 유의한 영향을 미치지 않음을 확인하여, ICS의 부작용에 대한 과도한 우려를 막고 치료 순응도를 높이는데 도움이 될 것으로 생각한다.

• 한국전기전자재료학회논문지
• /
• 제30권9호
• /
• pp.535-540
• /
• 2017

The changes in the electrical characteristics of CMOS ICs due to coupling with a narrow-band electromagnetic wave were analyzed in this study. A magnetron (3 kW, 2.45 GHz) was used as the narrow-band electromagnetic source. The DUT was a CMOS logic IC and the gate output was in the ON state. The malfunction of the ICs was confirmed by monitoring the variation of the gate output voltage. It was observed that malfunction (self-reset) and destruction of the ICs occurred as the electric field increased. To confirm the variation of electrical characteristics of the ICs due to the narrow-band electromagnetic wave, the pin-to-pin resistances (Vcc-GND, Vcc-Input1, Input1-GND) and input capacitance of the ICs were measured. The pin-to-pin resistances and input capacitance of the ICs before exposure to the narrow-band electromagnetic waves were $8.57M{\Omega}$ (Vcc-GND), $14.14M{\Omega}$ (Vcc-Input1), $18.24M{\Omega}$ (Input1-GND), and 5 pF (input capacitance). The ICs exposed to narrow-band electromagnetic waves showed mostly similar values, but some error values were observed, such as $2.5{\Omega}$, $50M{\Omega}$, or 71 pF. This is attributed to the breakdown of the pn junction when latch-up in CMOS occurred. In order to confirm surface damage of the ICs, the epoxy molding compound was removed and then studied with an optical microscope. In general, there was severe deterioration in the PCB trace. It is considered that the current density of the trace increased due to the electromagnetic wave, resulting in the deterioration of the trace. The results of this study can be applied as basic data for the analysis of the effect of narrow-band high-power electromagnetic waves on ICs.