• Journal of Advanced Marine Engineering and Technology
• /
• 제28권5호
• /
• pp.746-753
• /
• 2004

In this paper, the Power Management System(PMS) which based on a decision making system according to power strategy is proposed and implemented. PMS is designed to have functions of power monitoring. controlling, synchronizing load sharing and monitoring of driving engine, etc. PMS consists of the internet communication system(ICS). Remote Management System(RMS) and Sensor Driver System (SDS) ICS transmits the monitoring and supervisory data via Internet to Remote Management System(RMS) in real-time SDS detects various power system data on local generator and utility via I/O interface system. I/O interface system receives various status data and outputs control signals. Implemented PMS is tested with dummy signal to verify proposed functions and shows good results. For future study implemented PMS will be tested under real load condition to merchandize.

• Journal of information and communication convergence engineering
• /
• 제14권4호
• /
• pp.268-271
• /
• 2016

An efficient inductive switching noise suppression technique for mixed-signal integrated circuits (ICs) using standard CMOS digital technology is proposed. The proposed design technique uses a parallel RC circuit, which provides a damping path for the switching noise. The proposed design technique is used for designing a mixed-signal circuit composed of a ring oscillator, a digital output buffer, and an analog noise sensor node for $0.13-{\mu}m$ CMOS digital IC technology. Simulation results show a 47% reduction in the on-chip inductive switching noise coupling from the noisy digital to the analog blocks in the same substrate without an additional propagation delay. The increased power consumption due to the damping resistor is only 67% of that of the conventional source damping technique. This design can be widely used for any kind of analog and high frequency digital mixed-signal circuits in CMOS technology

• 한국산학기술학회논문지
• /
• 제5권1호
• /
• pp.26-28
• /
• 2004

본 논문에서는 유연성 있는 신호처리 방법으로 디지털 로직을 컴퓨터 논리연산 명령으로 구성하여 외부에서의 입력신호에 대응하는 논리연산의 결과를 입출력 채널을 통해 외부로 출력해 줄 수 있는 드라이브에 관한 연구이다. 이는 Decoder IC Multiolexer & Demulti Plexer, 기본 로직 IC 등의 가상구현 및 BIT출력이 가능한 디지털 신호원으로서의 기능이 가능하며 일반 산업체에서 유용하게 사용될 수 있으리라 사료된다.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1998년도 춘계학술발표회논문집(1)
• /
• pp.660-665
• /
• 1998

The feasibility study on conceptual design methodology for accelerator-driven sodium-cooled sub-critical transmutation reactors has been conducted to optimize the design parameters from the scale laws and validates reactor performance with the integrated code system. A 1000 MWth sodium-cooled sub-critical transmutation reactor has been scale and verified through the methodology in this paper, which is referred to advanced Liquid Metal Reactor (ALMR). a Pb-Bi target material and a partitioned fuel are the liquid phases, and they are cooled by the circulation of secondary Pb-Bi coolant and by primary sodium coolant, respectively. Overall key design parameters are generated from the scale laws and they are improved and validated by the intergrated code system. Intergrated Code System (ICS) consist of LAHET, HMCNP, ORIGEN2, and COMMIX codes and some files. Through ICS the target region, the core region, and thermal-hydraulic related are analyzed once-through. Results of conceptual design are attached in this paper.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2008년도 추계학술대회 논문집
• /
• pp.105-107
• /
• 2008

LED driver is important for reliable LED lighting system. A variety of ICs for LED driver are supplied by almost all semiconductor company The types and performances are too diverse to collect proper IC and use efficiently. This paper classifies driver IC according to the usage for each application area and the circuit topology. Finally, the paper shows several representative ICs for main applications with notice of important performance.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 D
• /
• pp.2802-2803
• /
• 2000

In spite of the presence of various kind of Integrated Circuits it's not always easy to get the right part. Besides, it is hard to find a vendor for a small Quantity consumers like who develop prototype applications. In this study, we've tried to get the logical signals from the PC based device we've developed that correspondents with the real ICs. It can emulate decoder ICs, multiplexers, demultiplexers and basic logic gates.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2007년도 하계종합학술대회 논문집
• /
• pp.117-118
• /
• 2007

The received signal of ICS repeater is composed of BS(Base Station) and feedback signals. In this case, if the feedback signal is not rejected, system is oscillated. we use the IF signal for rejecting the feedback signal at ICS system. In general, SAW filter is used to reject the image of If signal. the use of this filter generates the system delay problems. In this paper, instead of SAW filter we use the Hilbert transform for rejecting image signal.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2007년도 추계학술발표논문집
• /
• pp.78-80
• /
• 2007

According to the development of VLSI integration technology and getting bigger the circuit size, it is a significant problem to verify systemized circuit. The faster and more accurate verification has very significant meaning in the field of electronic industry because it can yield the product comparably faster and reduce the trial and errors. In spite of the presence of various kind of Integrated Circuits it's not always easy to get the right part. Besides, it is hard to find a vendor for a small quantity consumers like who develop prototype applications. In this study, we've tried to get the logical signals from the PC based device we've developed that correspondents with the real ICs. It can emulate decoder ICs, multiplexers, demultiplexers and basic logic gates.

• 정보보호학회지
• /
• 제29권2호
• /
• pp.36-47
• /
• 2019

4차 산업혁명이 본격화됨에 따라 스마트 제조 환경으로 변화하면서 제조 공장은 설비제어가 자동화되고 산업용 이더넷과 TCP/IP 기반으로 네트워크 연결되어 통합 운영되고 있으며 본사 비즈니스망의 MES, ERP, PLM 등과 연계되면서 랜섬웨어 등 악성코드 유입 및 외부 사이버 공격으로부터의 보안 위협이 높아지고 있다. 본 논문에서스마트 제조 공장에 대한 사이버 침입을 탐지하고 대응하기 위해 스마트 제조 환경에서의 이상징후 탐지 기술 현황을 분석한다. 먼저 ICS(Industrial Control System)에 대한 이상징후 탐지를 위해 ICS 위협 경로를 분석하고 스마트 제조 네트워크에서 사용되는 산업용 이더넷 프로토콜을 살펴본다. 다음으로 국내 제어망 이상징후 탐지 체계 구축 동향을 분석하고 제어망 이상징후 탐지 기술을 분류한다. 마지막으로 (주)앤앤에스피에서 과학기술정보통신부 과제로 수행하고 있는 "선제적인 제조공정 이상징후 인지" 연구과제의 수행 현황을 살펴본다.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2020년도 추계학술발표대회
• /
• pp.409-412
• /
• 2020

주요기반시설 산업제어시스템의 폐쇄 망 운영 환경에 따라 내부자 사이버 보안 위협으로 인한 피해가 다수 발생하고 있다. 따라서 이에 대응하기 위한 내부 보안 대책이 요구된다. 이에 본 논문은 산업제어시스템의 안전한 운용을 위한 SW 보안 무결성 관리 프로그램을 제안한다. 자산의 구매, 설치, 운영, 유지보수를 통합 관리함으로써 전반적인 라이프 사이클의 흐름 내에서 정보보안 강화를 확립하는 것을 목표로 한다. 이를 통하여 산업제어시스템의 특성을 반영한 효과적인 내부 보안 관리 프로그램으로 활용될 수 있을 것이다.