• Journal of Korean Neurosurgical Society
• /
• v.29 no.4
• /
• pp.536-542
• /
• 2000

Objective : This study was performed to evaluate the relationships among intracranial pressure(ICP), cerebral perfusion pressure(CPP), and cerebral arteriovenous oxygen difference($AVDO_2$) which were used as parameters of adequacy of cerebral blood flow to support cerebral metabolism after severe head injury and also to examine the association between delayed cerebral infarction and outcome. Material and Method : The authors studied the ICP, CPP and $AVDO_2$ before and after treatment on 34 head-injured patients from June 1996 to December 1997 and examined the association with the change of an ICP, CPP and $AVDO_2$ following treatment and the development of delayed cerebral infarction. Sixteen patients underwent craniotomy for hematoma evacuation and eighteen patients received mannitol to decrease ICP. Results : The development of delayed cerebral infarction was demonstrated in 3(42.9%) out of 7 patients in no improvement group and 13(48.1%) out of 27 patients in improvement group with an increased ICP following treatment. Also, the development of delayed cerebral infarction was demonstrated in 8(50%) out of 16 patients in no improvement group and 8(44.4%) out of 18 patients in improvement group with a decreased CPP following treatment. The association with changes of ICP and CPP following treatment and development of delayed cerebral infarction was not statistically significant(p>0.01). However, 11(78.6%) out of 14 patients who demonstrated an increase in $AVDO_2$ and 5(25%) out of 20 patients who demonstrated a decrease in $AVDO_2$ following treatment developed delayed cerebral infarction. No improvement(reduction) in $AVDO_2$ following treatment was significantly associated with the development of delayed cerebral infarction(p<0.01). All of 16 patients with delayed cerebral infarction showed poor prognosis. Conlcusion : The change of $AVDO_2$ rather than those of ICP and CPP was considered more important factor for the development of the delayed cerebral infarction and poor outcome.

• Applied Science and Convergence Technology
• /
• v.24 no.2
• /
• pp.27-32
• /
• 2015

We analyzed the destruction patterns of a turbo-molecular pump (TMP) resulting from its sudden exposure of a foreline to the atmospheric pressure due to a destruction of the foreline connecting clamp of an ICP dry etcher for 300 mm wafers during high-vacuum operation ($5{\times}10^{-6}$ Torr). Unlike in the case of view port's breakage, the TMP's rotor module was crashed inside the chamber. The primary damage resulted from the collision of the blades and stators, and the secondary damage resulted from the breaking of the rotor - driving shaft assembly. The fixing screws of the rotor and axial shaft were bent and broken when the TMP controller output the maximum current even after the crash event. Electrical power consumption analysis of the TMP power controller confirmed it. The stress distributions were analyzed by a finite element method using CFD-ACE+ multi physics software. Rotating inertia of each parts and kinetic energies were calculated as well. 68% of the rotational kinetic energy is deposited by the rotor - shaft module.

• Environmental Analysis Health and Toxicology
• /
• v.29
• /
• pp.18.1-18.9
• /
• 2014

Objectives The purpose of this study was to determine a separation method for each arsenic metabolite in urine by using a high performance liquid chromatography (HPLC)-inductively coupled plasma-mass spectrometer (ICP-MS). Methods Separation of the arsenic metabolites was conducted in urine by using a polymeric anion-exchange (Hamilton PRP X-100, $4.6mm{\times}150mm$, $5{\mu}m$) column on Agilent Technologies 1260 Infinity LC system coupled to Agilent Technologies 7700 series ICP/MS equipment using argon as the plasma gas. Results All five important arsenic metabolites in urine were separated within 16 minutes in the order of arsenobetaine, arsenite, dimethylarsinate, monomethylarsonate and arsenate with detection limits ranging from 0.15 to $0.27{\mu}g/L$ ($40{\mu}L$ injection). We used G-EQUAS No. 52, the German external quality assessment scheme and standard reference material 2669, National Institute of Standard and Technology, to validate our analyses. Conclusions The method for separation of arsenic metabolites in urine was established by using HPLC-ICP-MS. This method contributes to the evaluation of arsenic exposure, health effect assessment and other bio-monitoring studies for arsenic exposure in South Korea.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.27 no.3
• /
• pp.413-418
• /
• 1998

There are several types of salts that classifed into raw salts(Chunil salt, Saeng salt), purified salts (NaCl reagent grade, Hanju salt) and processed salts(Gueun salt, Saeng kum, Bamboo salt) in Korea. Their major element is NaCl but raw salt from sea water contains other minerals such as K, Mg and S. Mineral contents of the various kinds of salt analyzed with ICP-AES and AAS were different, especially on the contents of K, Mg and Ca. Chunil salt was abundant in Ca(1,037ppm), K(3,707ppm), Mg(10,266ppm) and S(7,459ppm), and salt water from the Chunil salt contained small amounts of Pb, Al, Cr and Hg. Processed salts contained high levels of Ca, K, Mg and Fe. Especially, high levels of K, P, Fe and Ge were detected in bamboo salt. Purified salts showed regular crystal form and raw salts exhibited irregular crystal form under the SEM. The processed salts were not crystal form, but fused and irregular round form.

• Journal of the Korean institute of surface engineering
• /
• v.55 no.2
• /
• pp.77-83
• /
• 2022

Nanocrystalline MoN coatings were prepared by inductively coupled plasma magnetron sputtering (ICPMS) changing the plasma power from 0 W to 200 W. The properties of the coatings were analyzed by x-ray diffraction, field emission scanning electron microscopy, atomic force microscopy, nanoindentation tester and semiconductor characterization system. As the ICP power increases, the crystal structure of the MoN coatings changed from a mixed phase of γ-Mo₂N and α-Mo to a single phase γ-Mo₂N. MoN coatings deposited by ICPMS at 200 W showed the most compact microstructure with the highest nanoindentation hardness of 27.1 GPa. The electrical resistivity of the coatings decreased from 691.6 μΩ cm to 325.9 μΩ cm as the ICP power increased.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.27 no.2
• /
• pp.75-79
• /
• 2017

Honeycomb-shaped Ag-grid transparent conductive electrodes (TCEs) were fabricated using two different processes, high density plasma etching and lift-off, and the optical and electrical properties were compared according to the fabrication method. For the fabrication of the Ag-grid TCEs by plasma etching, etch characteristics of the Ag thin film in $10CF_4/5Ar$ inductively coupled plasma (ICP) discharges were studied. The Ag etch rate increased as the power increased at relatively low ICP source power or rf chuck power conditions, and then decreased at higher powers due to either decrease in $Ar^+$ ion energy or $Ar^+$ ion-assisted removal of the reactive F radicals. The Ag-grid TCEs fabricated by the $10CF_4/5Ar$ ICP etching process showed better grid pattern transfer efficiency without any distortion or breakage in the grid pattern and higher optical transmittance values of average 83.3 % (pixel size $30{\mu}m/line$ width $5{\mu}m$) and 71 % (pixel size $26{\mu}m/line$ width $8{\mu}m$) in the visible range of spectrum, respectively. On the other hand, the Ag-grid TCEs fabricated by the lift-off process showed lower sheet resistance values of $2.163{\Omega}/{\square}$ (pixel size $26{\mu}m/line$ width $18{\mu}m$) and $4.932{\Omega}/{\square}$ (pixel size $30{\mu}m/line$ width $5{\mu}m$), respectively.

• Journal of Food Hygiene and Safety
• /
• v.34 no.4
• /
• pp.325-333
• /
• 2019

The present study was carried out to identify the distribution characteristics of heavy metals in ginseng and wood-cultivated ginseng reduction of dietary exposure. Samples of ginseng and wood-cultivated ginseng were collected from 14 and 5 regions across Korea, respectively. Lead (Pb), cadmium (Cd) and arsenic (Ar) were detected by ICP-MS after microwave digestion, whereas aluminum (Al) was determined using ICP. Cultivated ginseng peels were 16.2% of whole root, while the peels and fine roots amounted to 21.8% and 16.8% of whole wood-cultivated ginseng, respectively. Taking into account the weight and concentration of the heavy metals by root part, their distribution ratios were calculated and compared. The cultivated ginseng peels contained 40.3% Pb, 25.9% Cd, 47.6% As, and 89.9% Al. Meanwhile, heavy metals consisting of 27.2% Pb, 28.2% Cd, 48.3% As, and 56.8% Al were distributed in the peels of the wood-cultivated ginseng. There was no significant difference between the peels and fine roots of the wood-cultivated ginseng with respect to the distribution proportion of heavy metals, except for Al. These results indicate that the level of dietary exposure to heavy metals could be reduced by peeling ginseng and wood-cultivated ginseng prior to consumption.

• Journal of Korean Neurosurgical Society
• /
• v.44 no.4
• /
• pp.240-244
• /
• 2008

Objective : Sotos Syndrome is characterized by macrocephaly, overgrowth, and developmental delay, and more than 300 patients have been reported worldwide to date. The authors reviewed the clinical characteristics of 8 patients with Sotos Syndrome in Korea for a new understanding and treatment strategies. Methods : The medical records of a total of eight Korean children with Sotos Syndrome were reviewed. All patients underwent developmental checkup, lumbar punctures for measurement of intracranial pressure (ICP), brain and spine magnetic resonance imaging and computerized tomography. Results : All 8 patients showed macrocephaly and the characteristic craniofacial features of Sotos Syndrome. Other clinical characteristics shown were overgrowth (7/8), developmental delay (7/8), congenital heart defect (3/8), flat foot (8/8), scoliosis (4/8), spina bifida (8/8), hydrocephalus (4/8), cavum vergae (3/8), and increased subdural fluid collection (5/8). Mean ICP measured via lumbar puncture was $27.35{\pm}6.25\;cm$ $H_2O$ (range 20 to 36 cm $H_2O$). Two patients received ventriculo-peritoneal shunt, and 1 patient underwent subduro-peritoneal shunt with improvement. Spinal orthosis was applied to 4/5 patients with scoliosis and 4/8 children with flat foot were provided with foot orthosis. Conclusion : In this first Korean study of 8 Sotos Syndrome patients we demonstrated the presence of spina bifida and increased ICP, which had not been previously described. The authors therefore suggest that all patients with Sotos Syndrome should undergo examination for the presence of spina bifida, and that shunt procedures would improve development and alleviate clinical symptoms.

• Journal of Korean Neurosurgical Society
• /
• v.64 no.2
• /
• pp.261-270
• /
• 2021

Objective : Decompressive craniectomy (DC) can partially remove the unyielding skull vault and make affordable space for the expansion of swelling brain contents. The objective of this study was to compare clinical outcome according to DC surface area (DC area) and side. Methods : A total of 324 patients underwent different surgical methods (unilateral DC, 212 cases and bilateral DC, 112 cases) were included in this retrospective analysis. Their mean age was 53.4±16.6 years (median, 54 years). Neurological outcome (Glasgow outcome scale), ventricular intracranial pressure (ICP), and midline shift change (preoperative minus postoperative) were compared according to surgical methods and total DC area, DC surface removal rate (DC%) and side. Results : DC surgery was effective for ICP decrease (32.3±16.7 mmHg vs. 19.2±13.4 mmHg, p<0.001) and midline shift change (12.5±7.6 mm vs. 7.8±6.9 mm, p<0.001). The bilateral DC group showed larger total DC area (125.1±27.8 ㎠ for unilateral vs. 198.2±43.0 ㎠ for bilateral, p<0.001). Clinical outcomes were nonsignificant according to surgical side (favorable outcome, p=0.173 and mortality, p=0.470), significantly better when total DC area was over 160 ㎠ and DC% was 46% (p=0.020 and p=0.037, respectively). Conclusion : DC surgery is effective in decrease the elevated ICP, decrease the midline shift and improve the clinical outcome in massive brain swelling patient. Total DC area and removal rate was larger in bilateral DC than unilateral DC but clinical outcome was not influenced by DC side. DC area more than 160 ㎠ and DC surface removal rate more than 46% were more important than DC side.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.74-74
• /
• 2009

The ArF PR mask was. developed to overcome the limit. of sub 40nm patterning technology with KrF PR. But ArF PR difficult to meet the required PR selectivity by thin PR thickness. So need to the multi-stack mask such as amorphous carbon layer (ACL). Generally capacitively coupled plasma (CCP) etcher difficult to make the high density plasma and inductively coupled plasma (ICP) type etcher is more suitable for multi stack mask etching. Hybrid Coupled Plasma source (HCPs) etcher using the 13.56MHz RF power for ICP source and 2MHz and 27.12MHz for bias power was adopted to improve the process capability and controllability of ion density and energy independently. In the study, the oxide trench which has the multi stack layer process was investigated with the HCPs etcher (iGeminus-600 model DMS Corporation). The results were analyzed by scanning electron microscope (SEM) and it was found that etching characteristic of oxide trench profile depend on the multi-stack mask.