• Preventive Nutrition and Food Science
• /
• v.17 no.4
• /
• pp.299-305
• /
• 2012

Yam has been recognized having the beneficial effects for the prevention of various diseases, such as cancer, immunity, infection and obesity etc. There is increasing consideration to supplement the antioxidant nutrients to make up the lack of the antioxidant nutrient intakes. No study has been reported for the analysis of antioxidant mineral contents and comparison to dietary recommended intake for the sense of health promotion. In our study, we analyzed the contents of antioxidant trace elements (Zn, Mn, Fe, Cu and Se) and Cr contents in cultivated Korean yam powders for evaluation of nutrient intake aspects. We collected the commercial yam powders from six different cultivated areas in the South Korea and measured antioxidant minerals (Zn, Mn, Fe, Cu and Se) and Cr contents using trace element-free plasma spectrometer (ICP) or atomic absorption spectrometer (AAS) after dry-ashing and then wet-acid digestion. The accuracy of mineral analysis method was confirmed by the mineral analysis of standard reference material. Each analyzed element contents in yam were compared to dietary reference intakes of Koreans (KDRIs). The average levels of trace elements (Zn, Mn, Fe, Cu, Se and Cr) in yam powders were 18.3, 11.9, 36.0, 3.7, 1.9 and 1.27 ${\mu}g/g$ yam powder, respectively. The intakes of Zn, Fe, Cu and Se of which KDRIs is determined, are accounted as being up to 23.8%, 55.6%, 32.5% and 236% recommended intake (RI) of KDRIs, if daily yam supplementation (50 g) of commercial instruction would be considered. The intake of Mn is about 25% adequate intake (AI) of KDRIs with the daily supplementation of yam powder. Most of mineral intakes from daily yam supplementation were with the range of non-detectable to <10% upper limit (UL) level, which is very much safe. The study results show that daily supplementation of Korean yam power is beneficial to provide the supplemental nutrient intake and also is safe, if the suggested dosage would be considered.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.18 no.1_2
• /
• pp.27-32
• /
• 2012

There are many possibilities that recycled papers adulterate contaminants during the process. The objective of this research was to evaluate safety of paper-based packaging materials for food, especially commercial pizza boxes in Korea. Ultimately, we compared recycled and non-recycled commercial paper packaging materials. This study was based on Korean Food and Drug Administration (KFDA) regulation. PCBs were measured by GC-ECD. Arsenic and lead were analyzed using an ICP-MS. Formaldehyde was determined by LC-MS. Fluorescent materials were detected by UV lamp. The result of this study shows that non-recycled paper packaging materials meets all the tested hygienic specifications for food packaging materials, whereas recycled paper-based paperboard box may be contaminated by fluorescent whitening agent. Though these results need to be further studied, it is recommended to avoid using recycled paper in direct contact with food when used in food packaging.

• Journal of Food Hygiene and Safety
• /
• v.30 no.1
• /
• pp.87-91
• /
• 2015

Eight minerals (Ca, Cu, Fe, K, Mg, Mn, Na and Zn) were determined in Schizandra chinensis fruits and their infusions in Seoul. The average mineral contents per Schizandra chinensis fruits (100 g) were K (966.08 mg), Mg (87.20 mg), Ca (15.19 mg), Mn (6.19 mg), Fe (3.99 mg), Zn (2.78 mg), Na (2.15 mg) and Cu (0.31 mg) respectively by Inductively Coupled Plasma-Mass Spectrometer. The quantity of K and Zn were found significantly higher in Korean fruits than the Chinese fruits (p < 0.05). The other 6 minerals did not reveal remarkable difference. In the case of processed Schizandra chinensis tea, it had K (217 mg), Mg (20.40 mg), Ca (7.16 mg), Na (2.95 mg), Mn (1.34 mg), Fe (0.95 mg), Zn (0.25 mg) and Cu (0.09 mg) per 100 g respectively. In extraction of Schizandra chinensis fruits, as it took a longer extraction time, and in a powder form rather than a raw form, it had a higher contents of minerals. When a powder type of Schizandra chinensis fruits was extracted for 24 hours at $25^{\circ}C$, the transfer rate appeared with Ca (36.27%), Mn (25.44%), K (22.43%), Zn (21.00%), Na (19.91%), Mg (19.55%) Cu (13.78%) and Fe (6.45%) respectively.

• The Journal of Advanced Prosthodontics
• /
• v.7 no.1
• /
• pp.56-61
• /
• 2015

PURPOSE. The purpose of this study was to evaluate the effects of the surface treatment and shape of the dental alloy on the composition of the prosthetic work and its metallic ion release in a corrosive medium after casting. MATERIALS AND METHODS. Orion Argos (Pd-Ag) and Orion Vesta (Pd-Cu) were used to cast two crowns and two disks. One of each was polished while the other was not. Two as-received alloys were also studied making a total of 5 specimens per alloy type. The specimens were submersed for 7 days in a lactic acid/sodium chloride solution (ISO standard 10271) and evaluated for surface structure characterization using SEM/EDAX. The solutions were quantitatively analysed for the presence of metal ions using ICP-MS and the results were statistically analysed with one-way ANOVA and a Tukey post-hoc test. RESULTS. Palladium is released from all specimens studied (range $0.06-7.08{\mu}g{\cdot}cm^{-2}{\cdot}week^{-1}$), with the Pd-Cu alloy releasing the highest amounts. For both types of alloys, ion release of both disk and crown pairs were statistically different from the as-received alloy except for the Pd-Ag polished crown (P>.05). For both alloy type, disk-shaped pairs and unpolished specimens released the highest amounts of Pd ions (range $0.34-7.08{\mu}g{\cdot}cm^{-2}{\cdot}week^{-1}$). Interestingly, in solutions submerged with cast alloys trace amounts of unexpected elements were measured. CONCLUSION. Shape and surface treatment influence ion release from dental alloys; polishing is a determinant factor. The release rate of cast and polished Pd alloys is between $0.06-0.69{\mu}g{\cdot}cm^{-2}{\cdot}week^{-1}$, which is close to or exceeding the EU Nickel Directive 94/27/EC compensated for the molecular mass of Pd ($0.4{\mu}g{\cdot}cm^{-2}{\cdot}week^{-1}$). The composition of the alloy does not represent the element release, therefore we recommend manufacturers to report element release after ISO standard corrosion tests beside the original composition.

• The Journal of Korean Academy of Prosthodontics
• /
• v.32 no.2
• /
• pp.281-295
• /
• 1994

It is very important for the ideal restorations of anterior openbite patients to record the mandibular movement and to harmonize mandibular movement with other organs in stomatognathic systems. This study was designed to compare the mandibular movement of anterior openbite patients with that of normal bite(Angle Class I) patients, to ascertain which components of mandibular movement have differences between two groups, and to use for occlusal treatment of mandibular movement. Saphon Visi-trainer Model 3(Tokyo Shizaisha Co. Japan) and Denar Pantronic(Denar Corp.,U.S.A.) were used to record mandibular movement. Pantronic survey was peformed by using an arbitrary hinge axis according to manufacturer's direction. Twenty-eight adult who have physiologically normal occlusion(Angle Class I) and are free of TM dysfunction were selected as a control group(Group 1). Fifteen adult who are anterior openbite patient and have not anterior guidance function and have posterior interference at protrusion were selected as a experimental group(Group 2). The results are as follows : 1. There was no statistically significant difference between the average immediate and progressive side shift of anterior openbite patients(0.54mm, $7.57^{\circ}$) and those of normal group(0.49mm, $5.96^{\circ}$). 2. The average protrusive and orbiting condylar inclination of anterior openbite patient$(30.87^{\circ},\;32.27^{\circ})$ were significantly lower than those of normal group$(36.11^{\circ},\;39.04^{\circ})$ (P<0.05). 3. In the results of Visi-trainer recordings, the mean for the maximum protrusion, the maximum laterotrusion, the angle of laterotrusion and the angle of protrusion in the horizontal trajectory between group 1 and 2 did not differ significantly. 4. The mean for the angle of protrusion, the maximum opening in the frontal trajectory, the ICP-RCP(A-P) distance and the angle of protrusion in the sagittal trajectory differ significantly(P<0.05). 5. The significant correlation was found between orbiting condylar inclination and protrusive condylar inclination.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.27 no.2
• /
• pp.370-378
• /
• 2000

The composite restorative resins have their insufficient resistance to wear. The subsurface degradation within the restoration is considered to be associated with wear. The aim of this study was to evaluate the resistance to degradation of six commercial composite resins in an alkaline solution. The brands studied were Clearfil APX(Kuraray), Heliomolar(Vivadent), Surefil(Dentsply), TPH(Dentsply), Tetric Ceram(Vivadent), and Z100(3M). Preweighed discs of each brand were exposed 0.1N NaOH solution at $60^{\circ}C$. After 14 days they were removed, neutralized with HCL, washed with water and dried to constant mass at $60^{\circ}C$. Resistance to degradation was evaluated on the basis of the following parameters: (a) mass loss(%) - determined from pre-and post-exposure specimen weights; (b) Si loss (ppm)-obtained from ICP-AE analysis of solution exposed to specimens; and (c) degradation depth$({\mu}m)$ - measured microscopically (SEM) from polished circular sections of exposed specimens. The results were as follows: 1. The mass loss was in descending order by Z100, TC H, S, CL, TPH and in the range of $0.45\sim3.64%$ 2. The degradation layer depth was in descending order by H, Z100, S, TC, TPH, CL and in the range of $10.85\sim73.38{\mu}m$ 3. For the Si concentration, Z100 was the highest of all 4. The highly significant correlation(r=0.81, p<0.05) was observed between mass loss and degradation depth. 5. Under scanning electronmicroscopy, the degradation of connection between resin matrix and fillers was observed 2 weeks after soaking in NaOH solution.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.35 no.1
• /
• pp.27-32
• /
• 2009

Human hair is an excretory system for trace metals and thus metal content in human hair can reflect the body status. The investigation of trace elements in human hair has been correlated with the diagnosis of various diseases as well as the monitoring of deficiency statues in nutrition. Many chronic diseases may be related to mineral status, some may be related to toxic mineral. Hair samples were collected from 120 inhabitants of the city of Seoul, Korea. In this study the concentrations of 10 elements (Hg, Pb, Cd, Al, As, U, Bi, Sb, Ba, Be) in hair were determined by inductively coupled plasma mass spectroscopy (ICP-MS). The conclusions showed that people in Seoul, Korea were affected by some kinds of toxic minerals. The Hg concentrations of male are higher than those of female and reference range. The mean concentration of Sb was higher in the female than male and reference range. In age distribution, the mean concentration of Hg was in 40's are higher than 20's and 30's and reference range. The concentrations of Al were the highest in the 20's. After analyzing, we concluded that a compounded treatment should be conducted, which considers the variety of factors related to detoxification.

• Economic and Environmental Geology
• /
• v.42 no.1
• /
• pp.27-53
• /
• 2009

A 30-m-thick Middle Ordovician Jigunsan Shale exposed along the southern limb of the Backunsan (Baekunsan) Syncline, Taebacksan (Taebaeksan) basin, has been simply considered as a transgressive shale sequence onlapped the underlying Maggol platform carbonates. Results of this study, however, suggest that majority of the Jigunsan Shale be interpreted as a regressive shale sequence downlapped onto a thin (ca. 240 cm) marine stratigraphic unit consisting of organic-rich (>3 wt.% of TOC) black shales in the lower Jigunsan Shale, which was accumulated at the time of maximum regional transgression. Detailed stratigraphic analysis in conjunction with XRD, XRF, and ICP-MS as well as Rock-Eval pyrolysis allows the thin marine stratigraphic unit in the Jigunsan Shale to define a condensed section that was deposited in a distinctive euxinic zone formed due to expansion of pycnocline during the early highstand phase. As well, a number of stratigraphic horizons of distinctive character that may have sequence stratigraphic or environmental significance, such as transgressive surface, maximum flooding surface, maximum sediment starvation surface, and downlap surface, are identified in the lower Jigunsan Shale. In the future, these stratigraphic horizons will provide very useful information to make a coherent regional stratigraphic correlation of the Middle Ordovician strata and to develop a comprehensive understanding on stratigraphic response to tectonic evolution as well as basin history of the Taebacksan Basin.

• Korean Journal of Soil Science and Fertilizer
• /
• v.44 no.6
• /
• pp.1080-1084
• /
• 2011

Predictive model for estimating total contents of cadmium (Cd) and lead (Pb) was developed by stepwise multiple-regression analysis using chemical properties and extractable contents of metal in paddy soil adjacent to abandoned mines in 2009 and 2010. Soil properties, e.g. pH, electrical conductivity (EC), organic matter (OM), available phosphorus ($P_2O_5$), and exchangeable cations (i.e. Ca, Na, K, Mg) were measured. Total contents of Cd and Pb as well as extractable contents of metals were analyzed by ICP-OES. Results showed that the total and extractable contents were estimated to be 3.55 and $0.27mg\;kg^{-1}$ in Cd and 83.38 and $24.32mg\;kg^{-1}$ in Pb on the average. From stepwise analysis, it was found that the contents of extractable Cd, Zn, Cu, as well as exchangeable Na were significantly influenced on estimation of the total contents of Cd in soil. Moreover, it also showed that the contents of extractable Pb, Zn, and Cu significantly affected estimation of the total contents of Pb in soil. More significant relationship between estimated and measured value in total contents of Pb was observed than those of Cd ($R^2$=0.87, p<0.0001). This demonstrates that extractable contents of metal are influenced more on estimation of total contents of Cd and Pb in soil than soil properties.

• The Korea Journal of Herbology
• /
• v.38 no.5
• /
• pp.85-95
• /
• 2023

Objectives : This study was intended to reveal the chemical profiles of aerial(leaf, stem) and underground(rhizome, radix) parts of wild ginseng, and to investigate their anti-aging effects on human skin cells. Methods : Wild ginseng, estimated for over 20 years, was divided into the aerial and underground parts. Total phenolic contents of each extracts were measured using a Folin-ciocalteu method. The contents of 18 amino acids, 8 minerals and 27 ginsenosides were determined by GC-FID, ICP-MS and LC-MS, respectively. The anti-aging effects, including the radical scavenging activity, the activation of mitochondrial function on human fibroblasts, and the proliferation activity on human keratinocyte progenitor cells, for the whole plant and underground part of wild ginseng were evaluated. Results : The total phenolic acids, amino acids, and minerals in the aerial part were more than twice as high as in the underground part. Compared to the cultivated ginseng root, there were various types of ginsenosides in both parts of wild ginseng, and the total amount was more than twice as high. In particular, the aerial part significantly contained ginsenoside F1, F2, C-Mc1, and C-O, and the distinctive patterns that distinguish each parts of wild ginseng from the cultivated ginseng root were derived. The whole plant and underground part of wild ginseng exhibited significant antioxidant effect(14.3-45.6%), activation of mitochondrial membrane potential(105.5-120.1%), and cell proliferation(112.1-125.4%). Conclusions : The entire plant and underground part of wild ginseng are high value-added plants and have beneficial effects on skin anti-aging properties through its abundant metabolites.