• Proceedings of the KIEE Conference
• /
• 2006.07d
• /
• pp.2061-2062
• /
• 2006

a-Si(amorphous silicon) TFT(thin film transistor)는 TFT-LCD(liquid crystal display)의 화소 스위칭(switching) 소자로 폭넓게 이용되고 있다. 현재는 a-Si을 이용하여 gate drive IC를 기판에 집적하는 ASG(amorphous silicon gate) 기술이 연구, 적용되고 있는데 이때 가장 큰 제약은 문턱 전압(Vth)의 이동이다. 특히 고온에서는 문턱 전압의(Vth) 이동이 가속화 되고, Ioff current가 증가 하게 되고, 저온($0^{\circ}C$)에서는 전류 구동능력이 상온($25^{\circ}C$) 상태에서 같은 게이트 전압(Vg)에 대해서 50% 수준으로 감소하게 된다. 특히 ASG 회로는 여러 개의 TFT로 구성되는데, 각각의 TFT가 고온에서 Vth shift 값이 다르게 되어 설계시 예상하지 못 한 고온에서의 화면 무너짐 현상 즉 고온 노이즈 불량이 발생 할 수 있다. 고온 노이즈 불량은 고온에서의 각 TFT의 문턱전압 및 $I_D-V_G$ 특성을 측정한 결과 고온 노이즈 불량에 영향을 주는 인자가 TFT의 width와 기생 capacitor비 hold TFT width가 영향을 주는 것으로 실험 및 시뮬레이션 결과 확인이 되었다. 발생 mechanism은 ASG 회로는 AC 구동을 하기 때문에 Voff 전위에 ripple이 발생 되는데 특히 고온에서 ripple이 크게 증가 하여 출력 signal에 영향을 주어 불량이 발생하는 것을 규명하였다.

• Journal of the Korea Society of Computer and Information
• /
• v.3 no.2
• /
• pp.77-84
• /
• 1998

The continuous time signal system by development of CMOS technology have been receiving consideration attention. In this paper, Low pass filter using CMOS floating resistor have been designed with cut off frequency for speech signal processing. Especially a new floating resistor consisting entirely of CMOS devices in saturation has been developed. Linearity within $\pm$0.04% is achieved through nonlineartiy via current mirrors over an applied range of $\pm$1V. The frequency response exceeds 10MHz, and the resistors are expected to be useful in implementing integrated circuit active RC filters. The low pass filter designed using this method has simpler structure than switched capacitor filter. So reduce the chip area. The characteristics of the designed low pass filter using this method are simulated by pspice program.

• Journal of Information Display
• /
• v.4 no.4
• /
• pp.4-7
• /
• 2003

The world largest 21.3" LTPS LCD has been successfully developed using SLS crystallization technology. Integration of gate circuit, transmission gate and level shifter was successfully performed in a large area display. Uniform and high performance of high quality grains of SLS technology make it possible to realize a uniform large size LTPS TFT-LCD with half the number of data driver IC's that is typically used in a-Si LCD. High aperture ratio of 65 % was achieved using an organic inter insulating method which lead to a high brightness of 500 cd/$cm^2$.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.241-244
• /
• 2003

The world largest 21.3" LTPS LCD has been successfully developed using SLS crystallization technology. Successful integration of gate circuit, transmission gate and level shifter was performed in a large area uniformly. Uniformity and high performance from high quality grains of SLS technology make it possible to come true a uniform large size LTPS TFT-LCD with half number of data driver IC's used in typical a-Si LCD. High aperture ratio of 65% was obtained using an organic inter insulating method, which lead a high brightness of 500cd/cm2.

• Proceedings of the IEEK Conference
• /
• 2000.11b
• /
• pp.249-252
• /
• 2000

A new Smart rower IC's based on the Partial SOI technology was designed for such applications as mobile communication systems, high-speed HDD systems etc. A new methodology of integrating a 0.8${\mu}{\textrm}{m}$ BiCMOS compatible Smart Power technology, high voltage bipolar device, high speed SAVEN bipolar device, LDD NMOSFET and a new LDMOSFET based on the Partial SOI technology is presented in this paper. The high voltage bipolar device has a breakdown voltage of 40V for the output stage of analog circuit. The optimized Partial SOI LDMOSFET has an off-state breakdown voltage of 75 V and a specific on- resistance of 0.249mΩ.$\textrm{cm}^2$ with the drift region length of 3.5${\mu}{\textrm}{m}$. The high-speed SAVEN bipolar device shows cut-off frequency of about 21㎓. The simulator DIOS and DESSIS has been used to get these results.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.36C no.3
• /
• pp.35-46
• /
• 1999

A derotator VLSI which compensates for the frequency and phase errors of a received signal in digital communication systems was developed employing a CORDIC algorithm. The CORDIC circuit directly rotates the input signal according to the phase error information, thus is much simpler than the conventional derotator architecture which consists of a DDFS (Direct Digital Frequency Synthesizer) and a complex multiplier. Since a derotator needs only small phase error accumulation, a fast direction sequence generation method which exploits the linearity of the arctangent function in small angles is utilized in order to enhance the operating speed. The chip was designed and implemented using a $0.6\mu\textrm{m}$ triple metal CMOS process by the full custom layout method. The whole chip size is $6.8\textrm{mm}^2$ and the maximum operating frequency is 25 MHz.

• ETRI Journal
• /
• v.21 no.4
• /
• pp.1-8
• /
• 1999

Thick metal 0.8${\mu}m$ CMOS technology on high resistivity substrate(RF CMOS technology) is demonstrated for the L-band RF IC applications, and we successfully implemented it to the monolithic 900 MHz and 1.9 GHz CMOS LNAs for the first time. To enhance the performance of the RF circuits, MOSFET layout was optimized for high frequency operation and inductor quality was improved by modifying the technology. The fabricated 1.9 GHz LNA shows a gain of 15.2 dB and a NF of 2.8 dB at DC consumption current of 15mA that is an excellent noise performance compared with the offchip matched 1.9 GHz CMOS LNAs. The 900 MHz LNA shows a high gain of 19 dB and NF of 3.2 dB despite of the performance degradation due to the integrating of a 26 nH inductor for input match. The proposed RF CMOS technology is a compatibel process for analog CMOS ICs, and the monolithic LNAs employing the technology show a good and uniform RF performance in a five inch wafer.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.36C no.11
• /
• pp.55-63
• /
• 1999

A new CMOS If Package design methodology is presented, analyzing the electrical characteristics of a package and its effects on the CMOS digital circuits. An analytical investigation of the package noise effects due to the simultaneous switching of the gates within a chip, i.e., simultaneous switching noise (SSN) is performed. Then not only are novel design formula to meet electrical constraints of the Package derived, but also package design methodology based on the formula is proposed. Further, in order to demonstrate the Proposed design methodology, the design results are compared with HSPICE (a general purpose circuit simulator) simulation for $0.3\mu\textrm{m}$-based CMOS circuits. According to the proposed design procedures, it is shown that the results have excellent agreements with those of HSPICE simulation.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.9 no.5
• /
• pp.27-33
• /
• 1972

This paper describes the computer-aided design, fabrication and performance of high Q and high gain active filters suitable for microminiaturization in the frequency range of 10-800MHz, based on the negative resistance operation of a transistor. 48 as high as 1000 and a transducer gain as high as 35dB can readily be obtained with a single-transistor amplifier and with an inductance as small as a few nH at higher frequencies and 150 nH at lower frequencies in tile above frequency range. The gain of the proposed active filter can be stoabilized within $\pm$ 1.5 dB over the temperature range -1$0^{\circ}C$ to +5$0^{\circ}C$ and the temperature dependence of the center frequency is tapicalla 50ppm/$^{\circ}C$. An experimental FM receiver utilizing these fitters and operating at a carrier frequency of 92 MH3 was built. The whole circuit was fabricated on eight alumina substrates of by the thick-film hybrid IC technique and the coils are constructed, for miniaturization, in a spiral form of 3 or 4 turns of enamel copper wire with an overall diameter of about 5mm. The test results are also reported in this paper.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.15 no.8
• /
• pp.648-658
• /
• 1990

There are many methods for speed up counting in speech recongition. A multiple processing method is the one way to achieve the aim using systolic array. This arithmetic operation by the array is achieved pipelining skill. And the operation is multiprocessing by processing element(PE) that is incresing counting efficiencies. The DTW PE cell is seperated into three large blocks. "MIN" is the one block for counting accumulated minimum distance, "ADD" block calculated these minimum distances, and "ABS" seeks for the absolut values to the total sum of local distances. We have accomplished circuit design and verification about the "ADD" and "ABS" blocks, and performed total layout '||'&'||' DRC(design rule check) using 3um CMOS N-Well rule base.le check) using 3$\mu$m CMOS N-Well rule base.