• 대한가정학회지
• /
• 제33권1호
• /
• pp.169-180
• /
• 1995

To determine the effects of guar suksolgi on blood glucose and lipids in type-ll diabetic subjects, a piece of guar suksolgi(36.3g, 54Kcal) was administered to eight patients for 3 weeks every meal. No significant differences occured indietary intakes and body weight before and after the treatment. Fasting blood glucose levels were decreased from 132.38mg/dI to 114.75mg/dI after the treatment, but not statistically significant. Blood TG levels were increased from 159.13mg/dI to 175.00mg/dI after the treatment, but not statistically significant. Excluding one patient who had extremely high TG level, blood TG levels tended to be decreased from 148.00mg/dI to 121.00mg/dI. TC LDL-c, HDL-c levels were decreased after the treatment, but not statistically significant. HbAIC concentrations were decreased from 8.54mg/kI to 7.80mg/dI after the treatment, but not statistically significant. In the case of three patients who had had normal fasting blood glucose levels, blood glucose levels tended to be decreased at postprandial 30, 60 minutes, and blood insulin levels tended to be decreased at postprandial 30, 60, 90, 120 minutes, although none of the levels were statistically significant. Therefore, if guar suksolgi is adinistered to type-ll diabetic subjects being more hyperglycemic than our patients, their blood glucose and lipids will be decreased significantly.

• 터널과지하공간
• /
• 제12권4호
• /
• pp.268-276
• /
• 2002

In this study, a 3D coordinate measurement system equipped with a laser displacement meter for digitizing rock joint surface was established and the digitized data were used to calculate several roughness parameters. The parameters used in this study were micro avenge inclination $angle(i_{ave})$, average slope of joint $asperity(SL_{ ave})$, root mean square of $i-angle(i_{rms})$, standard deviation of height(SDH), standard deviation of $i-angle(SD_i)$, roughness profile $index(R_P)$, and fractal dimension(D). The relationships between the roughness parameters based on the digitzation of the surface profile were analyzed. Since the measured value varied according to the degree of reflection and the variation of colors at the measuring point, rock joint surface was painted in white to minimize the influence of the surface conditions. The comparison of the measured values and roughness parameters before and after painting revealed the better consequence from measurement on the painted surfaces. Also, effect of measuring interval was studied. As measured interval was increased, roughness parameters were exponentially decreased. The incremental sequence of degree of decrease was $SDH\; i_{ave},\; i_{rms},\; SD_i,\;and\; R_ p-1$. As a result of comparison of parameters from pin-type measurement system and laser type measurement system, all value of parameters were higher when laser-type measurement system was used, except SDH.

• 한국정보과학회논문지:시스템및이론
• /
• 제34권5_6호
• /
• pp.176-186
• /
• 2007

상호연결망은 그래프로 모델링 할 수 있다: 노드는 정점으로 대응시키고, 링크는 에지로 대응시킨다. 상호연결망(그래프)의 지름은 서로 다른 모든 두 정점 사이의 최단경로 길이 중 최대이다. 상호연결망의 고장지름이란 연결도-1 개 이하의 임의의 정점에 고장이 있을 경우, 이들 고장 정점들을 제거한 연결망에서 모든 두 정점사이의 최단경로 길이 중 최대이다. 지름이 3이상이고 연결도가 r인 r-정규(regular) 그래프의 고장지름은 지름+1이상이다. 이 논문에서는 $m,n{\geq}3$ 인 2-차원 $m{\times}n$ 토러스에서 m=3 혹은 n=3일 때 고장지름은 max(m,n)이고, m,n>3일 때 고장지름은 지름 +1임을 보인다. 그리고 $k_i{\geq}3(1{\leq}i{\leq}d)$이고 $d{\geq}3$인 d- 차원 $k_1{\times}k_2{\times}{\cdots}{\times}k_d$ 토러스에서 서로 다른 임의의 두 정점 사이에 길이가 지름+1이하인 서로소인 경로들이 2d 개 존재함을 보인다. 두 정점 u와 v 사이의 서로소인 경로들이란, 공통의 정점들이 u와 v만 있는 경로들을 말한다. 이들 서로소인 경로들을 이용하여 $k_i{\geq}3(1{\leq}i{\leq}d)$이고 $d{\geq}3$인 d-차원 $k_1{\times}k_2{\times}{\cdots}{\times}k_d$ 토러스의 고장지름이 지름+1임을 보인다.

• 한국공간구조학회지
• /
• 제23권3호
• /
• pp.4-10
• /
• 2023

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제42권
• /
• pp.32.1-32.4
• /
• 2020

Background: Le Fort I osteotomy is a highly effective treatment for skeletal jaw deformities and is commonly performed. High Le Fort I osteotomy is a modified surgical procedure performed for improving the depression of the cheeks by setting the osteotomy higher than the conventional Le Fort I osteotomy. Developments in three-dimensional (3D) technology have popularized the use of 3D printers in various institutions, especially in orthognathic surgeries. In this study, we report a safe and inexpensive method of performing a high Le Fort I osteotomy using a novel 3D device and piezosurgery, which prevent tooth root injury without disturbing the operation field for patients with a short midface and long tooth roots. Results: A 17-year-old woman presented with facial asymmetry, mandibular protrusion, a short midface, and long tooth roots. We planned high Le Fort I osteotomy and bilateral sagittal split ramus osteotomy. Prevention of damage to the roots of the teeth and the infraorbital nerve and accurate determination of the posterior osteotomy line were crucial for clinical success. Le Fort I osteotomy using 3D devices has been reported previously but were particularly large in size for this case. Additionally, setting the fixing screw of the device was difficult, because of the risk of damage to the roots of the teeth. Therefore, a different surgical technique, other than the conventional Le Fort I osteotomy and 3D device, was required. The left and right parts of the 3D device were fabricated separately, to prevent any interference in the surgical field. Further, the 3D device was designed to accurately cover the bone surface from the piriform aperture to the infra-zygomatic crest with two fixation points (the anterior nasal spine and the piriform aperture), which ensured stabilization of the 3D device. The device is thin and does not interfere with the surgical field. Safe and accurate surgical performance is possible using this device and piezosurgery. The roots of the teeth and the infraorbital nerve were unharmed during the surgery. Conclusions: This device is considerably smaller than conventional devices and is a simple, low-cost, and efficient method for performing accurate high Le Fort I osteotomy.

• 대한교통학회:학술대회논문집
• /
• 대한교통학회 1999년도 제36회 학술발표회논문집
• /
• pp.477-482
• /
• 1999

• East Asian mathematical journal
• /
• 제33권3호
• /
• pp.317-322
• /
• 2017

Let $D{\subseteq}E$ be an extension of integral domains with characteristic zero, I be a nonzero proper ideal of D, and let H(D, E) and H(D, I) (resp., h(D, E) and h(D, I)) be composite Hurwitz series rings (resp., composite Hurwitz polynomial rings). In this article, we show that H(D, E) is an Archimedean ring if and only if h(D, E) is an Archimedean ring, if and only if ${\bigcap}_{n{\geq}1}d^nE=(0)$ for each nonzero nonunit d in D. We also prove that H(D, I) is an Archimedean ring if and only if h(D, I) is an Archimedean ring, if and only if D is an Archimedean ring.

• 한국환경복원기술학회지
• /
• 제19권3호
• /
• pp.45-57
• /
• 2016

This study was focused on the northernmost limit of the distribution changing of Daphniphyllum macropodum and studied characteristic of plant communities of natural monument No. 91 in Najangsan national park, Korea. The results of this study were as follows : 1. The highest importance percentage(I.P.) value at tree layer in Quercus. mongolica community was Q. mongolica, 37.8%. But the highest value of mean importance percentage(M.I.P.) was D. macropodum, 32.8%. 2. The highest I.P. value at tree layer in Carpinus laxiflora community was C. laxiflora, 47.4%. The highest M.I.P. value was C. laxiflora, 28.8% and M.I.P. value of D. macropodum was 24.0%. 3. The highest I.P. value at tree layer in D. macropodum community was D. macropodum, 55.6%. C. laxiflora and Q. mogolica I.P. value was 14.8% and 6.8%, respectively. The highest M.I.P. value was D. macropodum, 47.9%. Sapium japonicum and C. laxiflora M.I.P. value was 11.4% and 10.7%, respectively. 4. The highest I.P. value at tree layer in Quercus variabilis community was C. laxiflora, 20.8%. Q. variabilis and Acer pseudosieboldianum I.P. value was 15.3% and 12.5%, respectively. The highest M.I.P. value was D. macropodum, 21.5%. It needs to the continuous monitoring of vegetation and importance percentage change in tree layer and subtree layer of D. macropodum. The researching results of D. macropodum distribution, the distribution range of D. macropodum showed expanded more than range of Lim and Oh' result(1999). In other words, it was distributed low density level between Najangsa temple and Byeokryeonam, and distributed in upper Keumsun waterfall and Wonjeok upper valley. D. macropodum was appeared on hiking trails around from Wonjeokam to Bulchulbong. Especially, it was found in this study that D. macropodum was distributed on Seoraebong's north which placed outside area of Naejangsa region. In this study, it was considered that distribution range of D. macropodum was expanded. Also, it is expected to be used as a result of the field study of changing distribution study of broad leaved evergreen forest due to global warming.

• 호남수학학술지
• /
• 제33권3호
• /
• pp.419-424
• /
• 2011

Let D be an integral domain, Spec(D) the set of prime ideals of D, and X a subspace of the Zariski topology on Spec(D). We show that X is compact if and only if given any ideal I of D with $I{\nsubseteq}P$ for all $P{\in}X$, there exists a finitely generated idea $J{\subseteq}I$ such that $J{\nsubseteq}P$ for all $P{\in}X$. We also prove that if D = ${\cap}_{P{\in}X}D_P$ and if * is the star-operation on D induced by X, then X is compact if and only if * $_f$-Max(D) ${\subseteq}$X. As a corollary, we have that t-Max(D) is compact and that ${\mathcal{P}}$(D) = {P${\in}$ Spec(D)$|$P is minimal over (a : b) for some a, b${\in}$D} is compact if and only if t-Max(D) ${\subseteq}\;{\mathcal{P}}$(D).

• Korean Journal of Mathematics
• /
• 제18권4호
• /
• pp.395-407
• /
• 2010

In this paper, we prove the generalized Hyers-Ulam stability of the following quadratic functional equations $$cf\(\sum_{i=1}^{n}x_i\)+\sum_{j=2}^{n}f\(\sum_{i=1}^{n}x_i-(n+c-1)x_j\)\\=(n+c-1)\(f(x_1)+c\sum_{i=2}^{n}f(x_i)+\sum_{i<j,j=3}^{n}\(\sum_{i=2}^{n-1}f(x_i-x_j\)\),\\Q\(\sum_{i=1}^{n}d_ix_i\)+\sum_{1{\leq}i<j{\leq}n}d_id_jQ(x_i-x_j)=\(\sum_{i=1}^{n}d_i\)\(\sum_{i=1}^{n}d_iQ(x_i)\)$$ in random normed spaces.