• Journal of IKEEE
• /
• v.26 no.3
• /
• pp.437-444
• /
• 2022

This paper proposes a CRC error verification method for SPI and I2C buses of automotive semiconductors. In automotive semiconductors, when an error occurs in communication and an incorrect value is transmitted, fatal results may occur. Unlike LIN communication and CAN communication, in communication such as SPI and I2C, there is no frame for detecting an error, so some definitions of new standards are required. Therefore, in this paper, the CRC error detection mode is newly defined in the SPI and I2C communication protocols, and the verification is presented by designing it in hardware.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.739-742
• /
• 2010

The demand of MOST interface module is increasing with car-multimedia network system. MOST devices consist of INIC part which controls MOST network and EHC part which is used by user. The efficient data communication between EHC and INIC demands implementation of a proper device driver. This paper presents a design method for I2C communication driver which is used for transmitting control messages between nodes of MOST network. For effetive I2C communication, we design driver with NetService API. For testing the experiment, we use the MOST audio interface deivce for porting driver sources and will develop various driver on MOST device based OS.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.10
• /
• pp.899-905
• /
• 2016

Wireless access in vehicle environment (WAVE) communication is currently being researched as core wireless communication technologies for cooperative intelligent transport systems (C-ITS). WAVE consists of both vehicle to vehicle (V2V) communication, which refers to communication between vehicles, and vehicle to infrastructure (V2I) communication, which refers to the communication between vehicles and road-side stations. V2I has a longer communication range than V2V, and its communication range and reception rate are heavily influenced by various factors such as structures on the road, the density of vehicles, and topography. Therefore, domestic environments in which there are many non-lines of sight (NLOS), such as mountains and urban areas, require optimized communication channel modeling based on research of V2I propagation characteristics. In the present study, the received signal strength indicator (RSSI) was measured on both an experience road and a test road, and the large-scale characteristics of the WAVE communication were analyzed using the data collected to assess the propagation environment of the WAVE-based V2I that is actually implemented on highways. Based on the results of this analysis, this paper proposes a WAVE communication channel model for domestic public roads by deriving the parameters of a dual-slope logarithmic distance implementing a two-ray ground-reflection model.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.6
• /
• pp.251-255
• /
• 2015

In this paper, we propose a fuse controller which is used for storing the optimal value or the correction value for the surrounding product of the IoT applications and it is implemented serial communication circuit using a single pin. Because of the proposed single pin protocol is simpler in the hardware than the conventional $I^2C$ and SPI using two or more pins, it is suitable for the area of small amount of data transmission. The function of the one pin protocol is verified by logic simulation and the FPGA test board and it is fabricated using CMOS 0.35um technology. It is expected to use the IoT product that require the low power consumption and simple hardware.

• Journal of IKEEE
• /
• v.21 no.3
• /
• pp.227-233
• /
• 2017

Python language is widely used because of its ease of learning and its wide application range. Arduino, on the other hand, is also widely utilized hardware for physical computing and internet of things(IoT). However, Arduino is controlled by $C{^+^+}$ language, which makes it difficult for non-experts to enter swiftly. This paper proposes an errorless protocol that can simultaneously control multiple Arduino devices in a master device using python language with I2C communication. Using the protocol proposed in this paper, we can take advantage of the python language to control multiple Arduinos.

• The Journal of the Convergence on Culture Technology
• /
• v.1 no.3
• /
• pp.83-85
• /
• 2015

It has been increased that communicate each other things such as consumer electronics, mobile equipments and wearable computer with serial communication protocol. The conventional method of SPI and I2C high speed serial communication is widely used with 2 pin of clock and data pin. It has been more important than the speed of data transfer to simplify the hardware structure because the IoT components is reduced the hardware complexity. In this paper, we describe the protocol and implementation of serial data transfer with only one pin. The proposed protocol is suitable for the mobile products that send and receive the small amount of data with low speed and low power consumption.

• Journal of the Institute of Convergence Signal Processing
• /
• v.1 no.2
• /
• pp.115-121
• /
• 2000

This paper presents the analytic results of outage probability, considering the effect of Rician fading, interference and interference-reduction techniques, when a mobile communication system was constructed by using Stratospheric platform, one of the next generation wireless communication infrastructure which provides high speed multimedia services. The results show that carrier to interference power ratio C/I and fading depth K have an effect on outage probability. That is, outage probability decreases as K value increases for constant C/I value and C/I value increases for constant K value.

• Korean Journal of Optics and Photonics
• /
• v.30 no.2
• /
• pp.59-66
• /
• 2019

We report highly sensitive detection of myocardial infarction biomarkers, such as myoglobin and cTnI, within several hundred seconds using a rotating-analyzer ellipsometer and a biosensor with biochips fabricated on a $SiO_2$-coated tilted silicon substrate. We choose the running buffer to be pure phosphate-buffered saline (PBS) or 10% mixed human serum. When we choose the running buffer to be pure PBS, we obtain diagnostic densities of pure myocardial infarction biomarkers of up to 1 ng/ml and 5 pg/ml respectively. Meanwhile, when we use PBS with 10% human serum, the measured densities of myoglobin and cTnI were up to 1 ng/mL and 1 pg/mL respectively. The measured diagnostic densities are less than 1/15 and 1/80 (in cases of myoglobin and cTnI respectively) of those referenced by the World Health Organization.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.12
• /
• pp.2635-2642
• /
• 2012

MOST(Media Oriented Systems Transport) is a network protocol for vehicle multimedia, where it guarantees large bandwidth and reliability. However, previous MOST device utilized I2C or I2S communication method to data manage or transfer, Bandwidth of MOST have increased and additional equipments are added to one device, requiring a larger form of bandwidth communication method. Therefore, this research suggests of the methods in improving the efficiency of asynchronous data transfer, and suggest an algorithm, which will improve the reliability.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.4
• /
• pp.112-123
• /
• 2018

The C-ARS(Cooperative Automated Roadway System) refers to a road infrastructure system that links automated vehicles with road infrastructure and communicates with each other via V2X communication to support automated vehicles. The purpose of this study is to suggest a performance evaluation method of C-ARS service. This study exemplifies the 'Work zone information service' among I2V service that provide information to automated vehicles in road infrastructure. First, we define the requirements and service scope needed to check the use case analysis and service performance of the service, and propose an evaluation system for performance evaluation of these services. In addition, the evaluation system was used to verify the feasibility of evaluation through the field test of 'Work zone information service'.