• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 추계학술대회 논문집
• /
• pp.214-217
• /
• 1996

In this paper. we deal wish the I-t characteristic of law voltage distribution fuse. It is used to be thermal characteristic in being produced at fuse element part. The elements are divided low temperature melting element(LTME) by high temperature melting element(HTME). Those parts make of coordination. The characteristic of fuse is decided by material and design etc. used at element. We analysis I-t characteristic curve by using the numerical method. And we compared the curve of simulation with that of experiment

• Tribology and Lubricants
• /
• 제14권4호
• /
• pp.114-120
• /
• 1998

The T-curve, wear and erosion behaviors of two different silicon carbides, i.e., the fine grained SiC and the in situ-toughened SiC(IST-SiC). Both materials exhibited an increasing T-curve behavior, although the T-curve of IST-SiC was steeper than that of fine grained SiC. The fracture toughness of IST-SiC was larger than that of fine grained SiC at long crack regime, whereas an opposite tendency occurred at short crack regime. The rate of material removal during wear and erosion tests was higher in IST-SiC compared to fine grained SiC. The difference between the material removal rates of two materials was discussed in the light of their R-curve behaviors.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.217-222
• /
• 2001

For the life evaluating of notched members, it is the best way that performing the real fatigue test of structure containing notch. But this method required generally much times and costs to evaluate fatigue life. So, generally we use the modified S-N curve or several methods to predict fatigue life. In this study, crack initiation life was evaluated by fatigue testing the SAE keyhole specimen and smooth specimen made of Al 7075-T6 alloys using the constant load then obtained S-N curve of smooth specimen and P-N curve of SAE keyhole specimen. And, fatigue lives of keyhole specimen are predicted using some life prediction methods (Nominal range I method, Nominal range II method, FEM analysis) for investigating experimented results, and that were compared with experimental data. Predicted fatigue lives by FEM analysis were corresponded with experimental data between 1/3times and 3times on the whole, and predicted fatigue lives using modified S-N curve (Nominal range I method, Nominal range II method) were nonconservative compared with that of FEM analysis.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.345-350
• /
• 2001

In order to perform elastic-plastic fracture mechanical analyses, fracture resistance curves for concerned materials are required. 1T-CT specimen was used to obtain fracture resistance curves. But the fracture resistance curve by the 1T-CT specimen was very conservative to evaluate the integrity of the structure. And fracture resistance curve was affected by the specimen geometry and crack plane orientation. The objective of this paper is to be certain the conservativeness of the fracture resistance curve by the 1T-CT specimen and to provide the additional safety margin. For these, the fracture tests using the real pipe specimen and standard 1T-CT specimen test were performed. 4-point bending jig was manufactured for pipe test and direct current potential drop method was used to measure the crack extension and length for pipe test. From the pipe and the 1T-CT specimen test results, it was observed that the J-integral of the 1T-CT specimen test at the crack initiation point was very small compare to that of the pipe specimen test.

• 대한수학회논문집
• /
• 제34권1호
• /
• pp.105-111
• /
• 2019

Let $Y{\subset}{\mathbb{P}}^3$ be a degree d reduced curve with only planar singularities. We prove that $h^i({\mathcal{I}}_Y(t))=0$, i = 1, 2, for all $t{\geq}d-2$. We use this result and linkage to construct some triples (d, g, s), $d>s^2$, with very large g for which there is a smooth and connected curve of degree d and genus g, $h^0({\mathcal{I}}_C(s))=1$ and describe the Hartshorne-Rao module of C.

• 대한수학회지
• /
• 제57권1호
• /
• pp.89-111
• /
• 2020

In the present paper, we give some characterization of the L₂ maximal estimate for the operator P^t_a,γf(Γ(x, t)) along curve with complex time, which is defined by $$P^t_{a,{\gamma}}f({\Gamma}(x,t))={\displaystyle\smashmargin{2}{\int\nolimits_{\mathbb{R}}}}\;e^{i{\Gamma}(x,t){\xi}}e^{it{\mid}{\xi}{\mid}^a}e^{-t^{\gamma}{\mid}{\xi}{\mid}^a}{\hat{f}}({\xi})d{\xi}$$, where t, γ > 0 and a ≥ 2, curve Γ is a function such that Γ : ℝ×[0, 1] → ℝ, and satisfies Hölder's condition of order σ and bilipschitz conditions. The authors extend the results of the Schrödinger type with complex time of Bailey [1] and Cho, Lee and Vargas [3] to Schrödinger operators along the curves.

• Journal of Acupuncture Research
• /
• 제21권1호
• /
• pp.51-58
• /
• 2004

Objective: The purpose of this study is to report that D.I.T.I. can be used for diagnosis of scoliosis. Methods: We measured the posterior trunk surface of the patients with shoulder pain or low back pain. They were ruled out as scoliosis by D.I.T.I. and compared with X-ray finding of T L-spine Ap views and calculated scoliosis angle. Results: In according to the spinoprocess curve in D.I.T.I. we could rule out as scoliosis. Thermal difference of left and right segmental areas of the patients was showed. Scoliosis angle of the patients ranged from $4^{\circ}$ to $11^{\circ}$ in X-ray finding. Conclusions: The results suggest that D.I.T.I. can explain physiologic and functional abnormalities than X-ray, in diagnosis of scoliosis. But further studies are required to for the diagnosis of scoliosis by analysing D.I.T.I..

• Structural Engineering and Mechanics
• /
• 제9권4호
• /
• pp.375-382
• /
• 2000

Experimental investigation into the cyclic behaviour of sand plast brick masonry was performed on forty two square panels. The panels were subjected to cyclic uniaxial compression for two cases of loading: normal to bed joint and parallel to bed joint. Experimental data were used to plot the unloading-reloading curves for the entire range of the stress-strain curve. Mathematical expressions to predict the reloading and unloading stress-strain curves at various values of residual strain are proposed. A simple parabola and an exponential type formula are found adequate to model the unloading and reloading curves respectively. The models account for the potential effects of residual strain on these curves. Comparison of test results with the proposed mathematical expression shows good correspondence.

• 생명과학회지
• /
• 제15권6호
• /
• pp.935-940
• /
• 2005

Coumarine이 부착된 인산결합 단백질 (PBP-MDCC)의 형광변화가 뉴클레오사이드 삼인산 가수분해과정에서 배출된 무기 인산의 양을 측정하기 위해 관찰되었다. PBP-MDCC 정제후, 형광 방출 스펙트럼은 형광세기가 PBP-MDCC의 몰비을로 약 $70\%$까지 직선형태로 증가하는 것을 보였다. 형광 신호와 인산 기준물질과의 상호관계 측정이 인산 농도-형광세기 표준곡선을 구하기 위하여 stopped-flow 기구에서 행하여졌다. dTTP 가수분해로 부터 나오는 에너지를 이용하여 이중나선 DNA를 풀어주는 단백질인 T7박테리오파지 나선효소를 dPTT라 반응 시켰을 때, 형광변화를 배출된 인산의 양으로 전환할 수 있었다. 인산 배출 결과는 단일가닥 Ml3 DNA가 T7나선 효소에 의한 dTTP가수분해반응을 여러배 증가시키는 것을 보인다. 뉴클레오타이드 삼인산 가수분해 반응에 있어서 종말점 분석 대신에, PBP-MDCC에 의한 연속적인 인산 배출 분석이 배출된 인산을 측정하는데 있어서 쉽고 편리한 방법임을 보였다.

• 한국세라믹학회지
• /
• 제41권5호
• /
• pp.401-405
• /
• 2004

순수한 SrB $i_2$T $a_2$$O_{9}$ 세라믹스와 도너와 억셉터가 치환된 S $r_{0.99}$B $i_2$(T $a_{0.99}$ $W_{0.01}$)$_2$$O_{9}$ 와 SrB $i_2$(T $a_{0.99}$ $Ti_{0.01}$)$_2$ $O_{8.99}$ 세라믹스를 제조하고 미세구조, 강유전 P-E 이력특성, 상전이 온도를 조사하였다. 입자크기는 SrB $i_2$T $a_2$$O_{9}$ 세라믹스의 강유전 이력곡선에는 영향을 주지 않았다. 도너를 치환한 S $r_{0.99}$B $i_2$(T $a_{0.99}$ $W_{0.01}$)$_2$$O_{9}$ 세라믹스는 순수한 SrB $i_2$T $a_2$$O_{9}$ 세라믹스보다 잔류 분극이 크고 더욱 포화된 강유전 P-E 이력곡선을 보였으며, 억셉터가 치환된 SrB $i_2$(T $a_{0.99}$ $Ti_{0.01}$)$_2$ $O_{8.99}$ 세라믹스는 잔류분극이 크게 감소하여 가운데가 잘록한 모양을 보였다. 도너가 치환된 S $r_{0.99}$B $i_2$(T $a_{0.99}$ $W_{0.01}$)$_2$$O_{9}$ 세라믹스의 강유전 분극이 순수한 SrB $i_2$T $a_2$$O_{9}$ 세라믹스보다 더 큰 것은 Sr 공공의 생성에 의하여 분역벽 이동이 용이해졌기 때문이다.동이 용이해졌기 때문이다.동이 용이해졌기 때문이다.동이 용이해졌기 때문이다.