• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.115.1-115.1
• /
• 2011

최근 기본적인 pin 구조의 박막 cell 에서 i layer를 최적화 시키는 방안으로 double layer 구조가 많이 연구되고 있다. 본 연구에서는 ASA(Advanced Semicon ductor Analysis) simulation을 이용하여 i-double layer 최적화에 대한 연구를 진행해 보았다. 두께 150/150nm의 i double layer의 band gap 가변을 한 simulation 결과를 보았을 때, p쪽의 band gap이 상승하면서 intrinsic layer 내의 field가 증가하여 recombination center가 감소하였으나 FF의 감소가 있었다. n쪽의 band gap을 상승 시켰을때 n/i 쪽 field 증가로 Voc가 상승되어 초기 효율이 증가하였으나 intrinsic layer내의 field가 감소하여 recombination center가 오히려 증가하였다. 결과적으로 electric field와 효율을 동시에 고려했을 때 두께 300nm, 1.75의 band gap을 가지는 single layer 보다 150/150nm두께에 1.8/1.7 또는 1.8/1.75의 bandgap을 가지는 double layer를 사용하였을 때 보다 높은 효율을 얻을 수 있었다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.4A
• /
• pp.324-329
• /
• 2009

In this paper, a novel Snowflake-shaped microstrip patch antenna for application in the WLAN(5.2/5.8GHz) band is designed and fabricated. The size of antenna is $21.2{\times}16mm^2$ and substrate is used Taconic-RF30. To obtain sufficient bandwidth in Return loss <-10dB and dual resonance characteristic, the Short-pin is inserted on the patch and the coaxial probe source is used. The measured results of fabricated antenna show 220MHz and 135MHz bandwidth in Return loss <-10dB referenced to the WLAN(5.2/5.8GHz) band. The measured antenna gain is $4.7{\sim}6.9dBi$ in the WLAN(5.2/5.8GHz) band. The experimental 3-dB beam width in I-plane and H-plane are $73.2^{\circ}/82.75^{\circ}$ for 5.1500Hz, $74.56^{\circ}/83.63^{\circ}$ for 5.3500Hz, and $86.24^{\circ}/85.15^{\circ}$ for 5.7850Hz, respectively.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.5 no.2
• /
• pp.103-115
• /
• 2002

This paper describes the results on the design and implementation of large capacity cable checking system using I/O buffer method. The I/O buffer module which has feedback loops with input and output buffers is designed with logic gate in the VME board and controlled by MPC860 microprocessor. So this system can check a lot of cable at the same time with less size and less processing time than that of relay matrix method with the A/D converter. The size of the I/O buffer module can be variable according to the number of cable. And any type of cable can be checked even if the pin assignment of cable is changed.

• Journal of the Korean Vacuum Society
• /
• v.15 no.4
• /
• pp.374-379
• /
• 2006

In this study, carbon nanotubes (CNTs) were grown on glass substrates coated with Ni/Cr by an atmospheric pressure plasma enhanced chemical vapor deposition(AP-PECVD) and their structural and electrical characteristics were investigated as a possible application to the field emitter of field emission display (FED) devices. The substrate temperature ($400{\sim}500^{\circ}C$) were varied and the grown CNTs were multi wall CNTs (at $500^{\circ}C$, 15 - 20 layers of graphene sheets, distance of each layer : 0.3nm, inner diameter: 10 - 15nm, outer diameter: 30 - 40nm). The ratio of defective carbon peak to graphite carbon peak of the CNTs grown at $500^{\circ}C$ (C measured by fourier transform(FT)-Raman was 0.772 $I_D / I_G$ ratio. When field emission properties were measured, the turn-on field was $2.92V/{\mu}m$ and the emission field at $1mA/cm^2$ was $5.325V /{\mu}m$.

• Journal of the Korean Wood Science and Technology
• /
• v.29 no.4
• /
• pp.1-8
• /
• 2001

This study was carried out to investigate the strength and stiffness of drift pinned and bolted joints with steel-plates by the tension-type lateral strength tests. Specimens were solid wood of Pinus densiflora. Bolt and drift pin were jointed with inserted steel plates. Tests were conducted with combinations of two loading directions (parallel to the grain : 0 degree, perpendicular to the grain : 90 degree) and three diameters of fasteners (d = 6 mm, 10 mm, 12 mm). The results obtained were as follow: 1. In the test of the parallel to the grain, maximum loads were increased with increasing of the diameter of bolt and drift pin in the same end distance. In the test of perpendicular to the grain with diameter 10 mm and 12 mm, specimens mostly were failed with horizontal splits in woods reaching the yield load of drift pinned and bolted joints. 2. The ratio of maximum load to the yield load determined by the so-called "5% offset method", was great in bolted joints in the parallel to the grain This trend become more remarkable as the slenderness ratio was increased. 3. The calculated yield strength was agreed well with the experimental results of drift pinned joint(0 degree).

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.12
• /
• pp.1097-1102
• /
• 2003

In this paper, we used only PR as etching mask, while it used usually Cr/AU as etching mask, and in order to fabricate a photosensor has the increased sensitivity, we investigated on the sensitivity of general type and p-i-n type diode. we designed microchannel size width max 10um, min 5um depth max 10um, reservoir size max 100um, min 2mm. Fabrication of microfluidic devices in glass substrate by glass wet etching methods and glass to glass fusion bonding. The p-i-n diode has higher sensitivity than photodiode, Considering these results, we fabricated p-i-n diodes on the high resistive(4㏀$.$cm) wafer into rectangle and finger pattern and compared internal resistance of each pattern. The internal resistance of pin diode can be decreased by the application of finger pattern has parallel resistance structure from 571Ω to 393Ω.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.905-910
• /
• 2003

Most of previous research on machining process planning has not fully included consideration on fixturing. With fixture components properly assembled with the part workpiece in a CAD modeling environment, necessary geometric information of fixture elements and their interrelations with the part model can be obtained so that machining process plans could incorporate fixturing considerations. This paper introduces an interactive fixturing system called I-Fix. I-Fix is a dowel-pin based modular fixture system, and it has been developed using Solid Edge CAD system and Visual Basic. Through customized operations of the assembly commands of the CAD system, I-Fix significantly simplifies user operations and thus reduces fixturing time. Furthermore, I-Fix enhances user convenience by providing general guidance about the fixture components and fixturing methods.

• Journal of the Korean Society of Costume
• /
• v.61 no.1
• /
• pp.20-33
• /
• 2011

This study aims to analyze the expressive aspect of men's shirts through examining the characteristics of men's shirts with the trend of men's clothing well represented and considering the image based on high fashion. As a method of study, I have conducted the theoretical study through the literature data, and the content analysis through photographs from S/S collection in 2005 to F/W collection in 2010. Especially, in the recent men's shirts, the materials of glossy silk, wavering chiffon and jersey tend to appear and various images are represented with the tasteful decoration such as ruffle, pin tuck and embroidery together with pastel color. Thus, the result of this study is as follows: Firstly, the masculine and romantic images are researched as the image emphasizing the beautiful and soft masculine beauty which doesn't lose the masculinity even though they are seasonedwith the feminine elements. Soft masculine beauty is emphasized by using romantic image decoration of frills, beads and pin tuck or silk, jersey and openwork materials etc. Secondly, practical fusion images have been studied as the images emphasizing the freshness with practicality through grafting more than two items onto one shirt. Many designs have appeared representing new shapes by grafting more than two items onto one shirt or obscuring the border line between the items. Thirdly, the avant-garde chic images have been researched as the image emphasizing the chick image through representing unique and odd designs by excessively expressing the silhouette in general shapes of shirts. I come. to find that the mainly the designs, emphasizing the uniqueness and the distinction with transformed shapes of sleeves, cuffs and the length of shirts in exaggerated manners, are appearing. Thus, I intend to provide a reference material which will be useful for the newly created design and researches of figurative characteristics in the future fashion.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.12
• /
• pp.205-214
• /
• 2011

In this paper, we propose a mobile navigation application that allows a user to send location data to another user using the iPhone's GPS function and Mapkit framework. The GPS function of the iPhone detects the location of the first user and the Mapkit framework shows the first user location on Google Maps. If the second user requires guidance to a destination, the first user touches the record button on the proposed application to record his or her position. The first user can check his or her recorded location from the pin position on Google Maps, and he or she can then send the relevant information to the second user who wants to visit that location. The second user receives the location data and is guided to the destination easily by following the next position icon on the iPhone camera overlay or by following the pin position on Google Maps. Therefore, even if a user is traveling somewhere for the first time, the proposed application guides that user to his or her destination by receiving recorded location data from another user.

• Nuclear Engineering and Technology
• /
• v.51 no.8
• /
• pp.1991-1997
• /
• 2019

In this manuscript, we present a method for the direct calculation of an ambient dose equivalent (H^* (10)) for the external gamma-ray exposure with an energy range of 40 keV to 2 MeV in an electronic personal dosimeter (EPD). The designed EPD consists of a 3 × 3 ㎟ PIN diode coupled to a 3 × 3 × 3 ㎣ CsI (Tl) scintillator block. The spectrum-to-dose conversion function (G(E)) for estimating H^* (10) was calculated by applying the gradient-descent method based on the Monte-Carlo simulation. The optimal parameters for the G(E) were found and this conversion of the H^* (10) from the gamma spectra was verified by using ²⁴¹Am, ¹³⁷Cs, ²²Na, ⁵⁴Mn, and ⁶⁰Co radioisotopes. Furthermore, gamma spectra and H^* (10) were obtained for an arbitrarily mixed multiple isotope case through Monte-Carlo simulation in order to expand the verification to more general cases. The H^* (10) based on the G(E) function for the gamma spectra was then compared with H^* (10) calculated by simulation. The relative difference of H^* (10) from various single-source spectra was in the range of ±2.89%, and the relative difference of H^* (10) for a multiple isotope case was in the range of ±5.56%.