• East Asian Economic Review
• /
• 제16권4호
• /
• pp.363-394
• /
• 2012

WTO Government Procurement Agreement (GPA) was designed to liberalize and expand trade in government procurement. Revised GPA was implemented in 1996 and the latest revision was completed (but not yet implemented) in 2012, but as a plurilateral agreement. Since the end of the UR, there has been attempts by various WTO members to liberalize trade in the government procurement market - through an expansion of Parties who are signatories to GPA, and through a negotiated agreement on transparency in government procurement. The attempt to expand the Parties who are signatories to the GPA - attempt to increase the width of the coverage of the agreement - has been somewhat successful, but I argue that the goal should be to further liberate the government procurement markets of the current Party members - to reduce thresholds and other barriers which limit market access even to other GPA members, in other words, to increase the depth of coverage. Taking cue from Korea's FTA, I propose a two-level liberalization of the government procurement market under the GPA: A "light" level which would be the same as the current level of liberalization; and a "deep" level with lower thresholds and less exemptions. I argue that, as seen in Korea, with FTAs, many GPA Parties already have multiple levels of liberalization (i.e, spaghetti-bowl effect of FTAs), but by limiting the levels of liberalization to two, we can seek the best of deep liberalization but reduce the spaghetti-bowl effect.

• 한국광물학회지
• /
• 제23권3호
• /
• pp.267-272
• /
• 2010

${\alpha}$-크리스토발라이트 구조의 $GaPO_4$에 대한 고압 x-선 회절 실험을 상온에서 8.9 GPa까지 시행하였다. 정방정계에 속하는 출발결정구조는 1 GPa 이하의 압력에서 회절피크가 분리되는 변화를 보이는데, 아마도 망상구조를 이루고 있는 사면체의 방향성이 압력에 의해 흐트러지면서 상-I'로 상변이가 유도된 것 같다. 압력을 증가시키면, 상-I'는 2 GPa와 3 GPa 사이에서 정방정계에 속하는 고압상(상-III)으로 상변이를 하고 있다. 이 결과는 최근 동일한 시료를 이용하여 얻은 고압실험결과(Ming et al., 2007)와 일치하지 않는다. 최고압력에 도달한 다음, 압력을 대기압으로 내리면 상-III이 그대로 유지되는 것으로 나타났다.

• Toxicological Research
• /
• 제14권4호
• /
• pp.475-481
• /
• 1998

This study was performed to investigate the modifying effect of the general (GPA) and the fermented pilose antler (FPA) on experimental hepatocarcinogenesis and Natural Killer cell activity in rats. Specific pathogen free, 5-week male Sprague-Dawley rats were divided into four groups. To induce hepatocarcinogenesis, diethylnitrosamine (DEN, 200 mg/kg, i.p.) was used as a tumor initiator and was given in a single dose at experimental onset. All rats were given a partial hepatectomy (PH) at 3 weeks after experimental onset. Sodium phenobarbital (PB, 0.05% in diet), GPA (0.075% in diet) and FPA (0. 075% in diet) were given from 2 to 8 weeks. Group I of the initiation control group was only given DEN. As initiation-promotion group, Group II was given DEN and then PB. Group III and IV were given DEN-PB-GPA and DEN-PB-FPA, respectively. In hematological analysis, as compared with Group I. the number of white blood cells were significantly increased in the GPA (p<0.01) and the FPA treated group (p<0.05), respectively. Natural killer (NK) cell activity by flow cytometer (FCM) analysis was higher in group of treated with the GPA (35%) than that of the FPA (27.5%), but not significant. Result of the immunohistochemical staining of the glutathione S-transferase placental form (GST-p) indicated that the number of and area of the pre-neoplastic lesions was not significantly changed in Group III and IV compared Group II, respectively. In conclusion, the GPA and the FPA treatment significantly increased the number od WBC in peripheral blood, but the enhancing NK activity and the modifying effect on the experimental hepatocarcinogenesis were not observed.

• 한국항공운항학회지
• /
• 제13권3호
• /
• pp.1-8
• /
• 2005

The purpose of this study was to identify the relationship between personality type and GPA scores of the student majoring flight operation. The data were collected from 96 "H' University student. MBTI Test was selected and used to analyze student's personality type. The results from MBTI Test and GPA scores were analyze by SPSS 10.0 package. I found that E, S, T, J Type, SJ, ST Type, ESTJ, ISTJ Type student are dominated. There were no significant relationship between personality type and GPA scores. The effective teaching strategies have to be considered for each personality type for better education.

• 한국세라믹학회지
• /
• 제49권3호
• /
• pp.221-225
• /
• 2012

It is possible to enhance the color of the natural diamond with a high pressure high temperature(HPHT) process. We employed a pyrophyllite tube cell and cubic press apparatus for HPHT treatment on the brown colored Type II (5.6 GPa/ $1700^{\circ}C$/ 52 min), and Type I aB(5.6 GPa/ $1650^{\circ}C$/ 30 min) diamond samples. We investigated the microstructure, Types, fluorescence, properties of the diamonds with an optical microscopy, FT-IR, photoluminescence(PL) spectroscopy, Diamond-View, and micro-Raman spectroscopy. Two tinted brown diamonds changed into colorless just after the HPHT process. Optical microscopy showed that no crack and significant inclusion evolution occurred during the HPHT process except the small graphite spot appeared in Type I aB sample. FTIR spectrum confirmed that no Type, amber center, and platelet defect change with the HPHT treatment. Diamond-View could not distinguish the HPHT treated diamonds from the naturals. PL spectroscopy showed that N3 and H3 color centers remained even after HPHT process. Consequently, we successfully changed the color of diamonds into colorless by 5.6 GPa HPHT process.

• 한국광물학회지
• /
• 제26권1호
• /
• pp.35-44
• /
• 2013

유사 올리빈 구조를 가지는 탄소코팅 합성 $Li^+Fe^{2+}(PO_4)^{3-}$ 분말시료에 대한 상온-고압실험을 대칭 다이아몬드 앤빌기기를 이용하여 35.0 GPa까지 시행하였다. $LiFePO_4$의 압축 데이터를 이용하여 계산된 체적탄성률은 $130.1{\pm}10.3$ GPa이다. 18 GPa 이상의 압력에서 d = 3.386 ${\AA}$ 위치에 새로운 피크가 관찰되고 35 GPa에서는 d = 2.854 ${\AA}$에 또 다른 피크가 관찰되고 있으나 주 결정구조는 사방정계인 것으로 판단된다. 압력에 대한 단위 포 부피의 압축은 M1($Li^+O_6$)의 수축이 두드러지고 M2($Fe^{2+}O_6$)와 사면체($PO_4$)의 수축은 상대적으로 작은 것으로 나타났다.

• International Journal of Advanced Culture Technology
• /
• 제11권2호
• /
• pp.10-29
• /
• 2023

Grit or perseverance as a factor for student success and life has gained increasing attention. Statistical methods have been the norm in analyzing various aspects of grit, but they do not address the transient and dynamic behavior well. We, for the first time, developed two linear dynamical models that specifically address the feedback structure of a child's desire to achieve a high grade point average (GPA) and the necessary effort that will increase stress between parents and a child. We call the dynamical model as GSES (Goal, Status, Effort & Stress). The two dynamical models incorporate the positive (i.e., achieving a high GPA) and the negative sides (i.e., effort and elevated stress and thus unhappiness) for being gritty or perseverant. Different types of parenting style and a child's characteristics were simulated whether parents and a child are empathetic or stubborn to their expectations and stress (i.e., willing or unwilling to change). Simulations show that when both parents and a child are empathetic to each other's expectation and stress, the most stable situations with minimal stress and effort occur. When a stubborn parent's and a stubborn child were studied together, this resulted in the highest elevation of stress and effort. Stubborn parents and a complying or empathetic child resulted in considerably high stress to a child. Interference from parents may unexpectedly result in a situation in which a child's stress is seriously elevated. The GSES model shows the U-shaped happiness curve (i.e., reciprocal of stress) caused by the increasing and then decreasing goal

• 광물과 암석
• /
• 제34권3호
• /
• pp.169-176
• /
• 2021

본 연구는 압력을 이용한 제올라이트 내 중금속 양이온 또는 CO₂ 기체 포집 등의 응용연구를 하기 위한 기초 단계로 제올라이트의 압력 및 압력전달 매개체(Pressure-transmitting medium, PTM)에 따른 결정구조의 변화를 알아보기위한 목적으로 실험을 진행하였다. 천연 제올라이트 멜리노이트(Merlinoite, (K,Ca_0.5,Ba_0.5,Na)₁₀ Al₁₀Si₂₂O₆₄× 22H₂O)와 동일한 골격구조를 가지는 합성 물질인 제올라이트-W(K_6.4Al_6.5Si_25.8O₆₄× 15.3H₂O, K-MER)의 압력 하 압력전달 매개체에 따른 선형 압축률 및 체적 탄성률의 변화에 대한 X선 회절연구를 진행하였다. 합성된 시료는 정방정계에 속하는 I4/mmm 공간군으로 확인되었다. 압력전달 매개체 중 제올라이트의 동공 및 채널을 투과할 수 있는 투과 매개체(Penetrating medium)로 물, 이산화탄소를, 비투과 매개체로 실리콘 오일(Silicone-oil)을 각각 사용하였으며, 상압에서 최대 3 GPa까지 약 0.5 GPa 간격으로 가압하였다. 다이아몬드 고압유도장치 및 방사광 X-선원을 이용하여 압력 하 시료의 분말 회절을 측정하였고, 르바일(Le-Bail)법 및 버치-머내한 상태방정식을 이용하여 격자상수 및 체적탄성률의 변화를 관찰하였다. 모든 실험에서 c축의 선형압축률(𝛽^c)은 0.006(1) GPa^-1또는 0.007(1) GPa^-1의 값을 보여 압력 증가 대비 유사한 압축률을 보인 반면, a축의 압축률(𝛽^a)은 실리콘 오일 실험에서 0.013(1) GPa^-1을 보여 물과 이산화탄소 (𝛽^a=0.006(1) GPa^-1) 실험결과에 비해 압축률이 약 두 배정도 큰 것으로 확인할 수 있었다. 체적탄성률(K₀)은 물, 이산화탄소, 실리콘 오일의 실험에서 각각 50(3) GPa, 52(3) GPa, 29(2) GPa로 도출되었다. 압력 증가에 따른 ac면의 orthorhombicity를 측정한 결과 물과 이산화탄소 실험에서는 0.350~0.353의 비교적 일정한 값을 보였으나, 실리콘 오일의 실험에서는 y = -0.005(1)x + 0.351(1)의 함수를 만족시키며 압력이 증가할수록 값이 점차 작아졌다.

• Computers and Concrete
• /
• 제10권4호
• /
• pp.349-360
• /
• 2012

In this paper, compressive strength, water permeability and abrasion resistance of concretes containing high volume fine fly ash (FFA) and fine ground palm oil fuel ash (GPA) were studied. Portland cement type I was replaced with FFA and GPA at dosages up to 70% by weight of binder. Ground river sand (GRS) was also used to replace Portland cement in order to indicate the level of filler effect. Results indicated that FFA was slightly more reactive than GPA. The replacement of 40-70% of FFA produced concretes with compressive strength, permeability and abrasion resistance comparable to those of normal concretes. The incorporation of GPA slightly reduced the performances of concretes as compared to those of FFA concretes. The reduction of Portland cement was partly compensated by the increase in pozzolanic activity of the fine fly ash and palm oil fuel ash and thus enabled the large replacement levels.

• 마이크로전자및패키징학회지
• /
• 제27권4호
• /
• pp.113-117
• /
• 2020

논문에서는 고분자 나노구조 필름의 기계적 물성을 향상하기 위하여 광열효과를 이용한 열처리 공정을 응용하여 나노임프린트로 제작된 고분자 나노구조 필름의 기계적 물성에 미치는 영향을 규명하였다. Hybrid resin과 UV 나노임프린트을 이용하여 저반사 나노구조를 성형하고 IPL (intense pulsed light)를 이용하여 열처리를 수행한 뒤, 제작된 나노구조 필름의 투과율과 내스크래치성을 평가하여 나노구조의 성형성과 기계적 물성의 변화를 관찰하였다. 나노패턴의 특성에 의해서 나노구조의 투과율은 550 nm 파장에서 97.6%로 고투과율의 기능을 확인하였으며, IPL을 이용한 열처리를 진행한 경우 Hotplate를 이용한 열처리보다 경도는 0.51 GPa로, 0.27 GPa로 열처리한 시편에 비해 1.8배 향상하였으며, 동일 실험 조건에서 탄성율은 Hotplate 이용 시 4 GPa에서 IPL 이용 시 5.9 GPa로 1.4배 증가하였다.