• 한국주조공학회지
• /
• 제26권6호
• /
• pp.267-271
• /
• 2006

Metal foam is a class of attractive materials, which exhibits unique combinations of physical, mechanical, thermal, electrical and acoustic properties. In particular, it is light and good at absorbing energy, which makes it attractive in automotive and aerospace applications weight is critical. In this paper, the Mg alloy foam was prepared by melt foaming method by addition of calcium as thickening agent, and $TiH_2$ or $CaCO_3$ powder as blowing agent. The macrostructural observation of foamed Mg showed that the pore structures of Mg alloy foam made by $CaCO_3$ as blowing agent were much better than that of foams made by $TiH_2$ as blowing agent. In addition, this paper showed the possible reason of fabrication magnesium alloy foam in proportion to blowing agent and the porosity range was about 40 to 76% as results value.

• 스마트미디어저널
• /
• 제7권2호
• /
• pp.9-14
• /
• 2018

The k-ary n-cube $Q^k_n$ is widely used in the design and implementation of parallel and distributed processing architectures. It consists of $k^n$ identical nodes, each node having degree 2n is connected through bidirectional, point-to-point communication channels to different neighbors. On $Q^k_n$ we would like to transmit packets from a source node to 2n destination nodes simultaneously along paths on this network, the $i^{th}$ packet will be transmitted along the $i^{th}$ path, where $0{\leq}i{\leq}2n-1$. In order for all packets to arrive at a destination node quickly and securely, we present an $O(n^3)$ routing algorithm on $Q^k_n$ for generating a set of one-to-many node-disjoint and nearly shortest paths, where each path is either shortest or nearly shortest and the total length of these paths is nearly minimum since the path is mainly determined by employing the Hungarian method.

• East Asian mathematical journal
• /
• 제30권2호
• /
• pp.173-195
• /
• 2014

This study, utilizing several features about plane figures covered in the current secondary curriculum of mathematics and reviewing two solutions to cube duplication problem presented by Menaechmus, proving the solution by Nicomedes and visualizing solutions based on Apollonius' 'Conics' by medieval Islam geometricians such as Ab$\bar{u}$ Bakr al-Haraw$\bar{i}$, AbAb$\bar{u}$ J$\acute{a}$far al-Kh$\bar{a}$zin, Nas$\bar{i}$r al-D$\bar{i}$n al-T$\bar{u}s\bar{i}$, Y$\bar{u}$suf al-Mu'taman ibn H$\bar{u}$d, introduce to teachers and students in the field where the question of cube duplication problem comes from and which solving method has developed it and suggests new methods for visualization using dynamic geometry program as well so that the contents reviewed can be used in the filed. The solving methods to cube duplication problem in this paper are very creative and increase the practicality, efficiency and value of Mathematics, and provide students and teachers with the opportunities to reconfirm the importance and beauty of basic knowledge in the secondary geometry in the process of visualization of drawing figures using dynamic geometry program.

• 한국분말재료학회지
• /
• 제18권3호
• /
• pp.262-268
• /
• 2011

In order to investigate the microstructure and mechanical properties of WC-10 wt% Co insert tool alloy fabricated by PIM (Powder Injection Molding) process, the feedstock of WC-10 wt% and wax used as a kind of binder were mixed together by two blade mixer. After injection molding, the debinding process was carried out by two-steps. First, solvent extraction, in which the binder was eliminated by putting the specimen into normal hexane for 24 hrs at $60^{\circ}C$, and subsequently thermal debinding which was conducted at $260^{\circ}C$ and $480^{\circ}C$ for 6 hrs in the mixed gas of $H_2/N_2$, respectively. Meantime, in order to compensate the decarburization due to hydrogen, 1.2~1.8% of carbon was added to ensure the integrity of the phase. Finally, the specimens were sintered in vacuum under different temperatures, and the relative density of 99.8% and hardness of 2100 Hv can be achieved when sintered at $1380^{\circ}C$, even the TRS is lower than the conventional sintering process.

• 한국수소및신에너지학회논문집
• /
• 제22권1호
• /
• pp.42-50
• /
• 2011

The Montmorillonite (MMT) in the polymer matrix is expected to reduce methanol permeability due to the tortous path formed by dispersed silicate layers. However, the polymer composite membranes containing non-proton conducting inorganic particle tend to show low proton conductivity. To solve this problem, we used an ion exchange method to prepare functionalized MMT with various silane coupling agents. The modified MMT was randomly dispersed in sulfonated poly (arylene ether sulfone) (SPAES) matrix to prepare SPAES/modified MMT composite membranes. The performances of hybrid membranes for DMFCs application were investigated. The SPAES/modified composite membrane showed increased proton conductivity compared with the non-modified MMT composite membrane. However, the methanol permeability of the SPAES/modified membrane was higher than that of the non-modified MMT.

• 한국분말재료학회지
• /
• 제17권3호
• /
• pp.216-222
• /
• 2010

Self-standing $TiO_2$ nanotube arrays were fabricated by potentiostatic anodic oxidation method using pure Ti foil as a working electrode and ethylene glycol solution as electrolytes with small addition of $NH_4F$ and $H_2O$. The influences of anodization temperature and time on the morphology and formation of $TiO_2$ nanotube arrays were investigated. The fabricated $TiO_2$ nanotube arrays were applied as a photoelectrode to dye-sensitized solar cells. Regardless of anodizing temperature and time, the average diameter and wall thickness of $TiO_2$ nanotube show a similar value, whereas the thickness show a different trend with reaction temperature. The thickness of $TiO_2$ nanotube arrays anodized at $20^{\circ}C$ and $30^{\circ}C$ was time-dependent, but on the other hand its at $10^{\circ}C$ are independent of anodization time. The conversion efficiency is low, which is due to a morphology breaking of the $TiO_2$ nanotube arrays in manufacturing process of photoelectrode.

• 한국주조공학회지
• /
• 제26권6호
• /
• pp.272-276
• /
• 2006

[ $CaCO_3$ ]를 발포제로 사용하여 균일한 기공구조를 가지는 AZ91과 AM60 마그네슘 합금의 발포 금속을 주조법을 통하석 제조하였다. 발포 금속의 제조가 가능한 이유와 발포 마그네슘 합금의 기공구조가 연구를 통하여 논의되었다. 마그네슘 합금의 용탕은 $CaCO_3$의 분해 거동에 영향을 미친다. 제조된 AZ91 마그네슘 합금의 발포 금속은 높은 기공률과 큰 기공의 크기를 가졌으며, 발포 금속들 중에서 상대적으로 쉽게 발포되는 것으로 판단된다.

• 대한금속재료학회지
• /
• 제49권9호
• /
• pp.692-698
• /
• 2011

The thermo-chemical treatment (TCT) process was applied to achieve surface hardening of CP titanium. The following three different surface modification conditions were tested so that the best surface hardening process could be selected:(a) PVD, (b) TCT+PVD, and (c) TCT+Aging+PVD. These specimens were tested and analyzed in terms of surface roughness, wear, friction coefficient, and the gradient of hardening from the surface of the matrix. The three test conditions were all beneficial to improve the surface hardness of CP titanium. Moreover, the TCT treated specimens, that is, (b) and (c), showed significantly improved surface hardness and low friction coefficients through the thickness up to $100{\mu}m$. This is due to the functionally gradient hardened surface improvement by the diffused interstitial elements. The hardened surface also showed improvement in bonding between the PVD and TCT surface, and this leads to improvement in wear resistance. However, TCT after aging treatment did not show much improvement in surface properties compared to TCT only. For the best surface hardening on CP titanium, TCT+PVD has advantages in surface durability and economics.

• 한국정보과학회논문지:데이타베이스
• /
• 제29권4호
• /
• pp.262-273
• /
• 2002

MOLAP(multi-dimensional online analytical processing)은 데이타의 다차원적 분석 기술로서, 이는 질의 처리 속도를 높이기 위해 데이타를 큐브(cube)라고 불리는 다차원 배열에 저장하고 배열 인덱스를 사용하여 데이타를 엑세스한다. 큐브는 다양한 방식으로 디스크에 저장될 수 있으며 이 때 사용되는 방식에 따라 MOLAP의 주요 연산인 슬라이스와 다이스 연산 속도가 크게 영향을 받는다. 이러한 연산들을 효율적으로 처리하기 위해 다차원 배열을 작은 크기의 청크로 나누고 이 들 중에서 희박한 청크들을 압축하여 저장하는 기법이 [1]에 제안되어 있다. 이 방식에서는 청크들을 행우선 순서로 디스크에 저장한다. 본 연구에서는 청크들을 밀도와 인접도 기준으로 배치시킴으로써 슬라이스와 다이스 연산 속도를 향상시키는 방법을 제시한다. 청크 밀도를 이용하여 청크들을 디스크 블록 경계에 가능한 한 맞추었고, Z 인덱싱을 사하여 인접한 저밀도 청크들을 군집화 함으로써 디스크 I/O의 속도를 높였다. 제안한 큐브 저장 방식은 일반적 비즈니스 데이타의 분석에 흔히 사용되는 3~5차원의 큐브 저장에 효율적이라는 것을 실험적으로 보였다.

• Journal of Electrical Engineering and Technology
• /
• 제4권4호
• /
• pp.527-530
• /
• 2009

$(Ba_{0.57}Sr_{0.33}Ca_{0.10})TiO_3$(=BSCT) powders, prepared by the sol-gel method, were doped using $MnCO_3$ as the acceptor and $Dy_2O_3$ as the donor. This powder was mixed with an organic vehicle. BSCT thick films were fabricated by the screen-printing techniques on the alumina substrate. The structural and dielectric properties of BSCT thick films were investigated with variation of the $Dy_2O_3$ amount. As a result of the differential thermal analysis (DTA), the exothermic peak was observed at around $670^{\circ}C$ due to the formation of the polycrystalline perovskite phase. All the BSCT thick films showed the XRD patterns of a typical polycrystalline perovskite structure. The average grain size of BSCT thick films decreased with an increasing amount of $Dy_2O_3$. The relative dielectric constant and dielectric loss of the BSCT thick film doped $Dy_2O_3$ 0.1mol% were 4637.4 and 1.6% at 1kHz, respectively.