• Journal of environmental and Sanitary engineering
• /
• v.20 no.4 s.58
• /
• pp.21-30
• /
• 2005

This research was performed to measure the concentration distribution of bioaerosol in apartment houses in the region of Chungnam (Chunan, Asan) for 1 month, December, 2004. The results are as follows. 1. By using SDA method, the average concentration of total microbe and fungus in the air inside and outside apartment house below 4 years are $69,42cfu/m^3\;and\;15.66cfu/m^3$, while apartment house over 4 years, $214.58cfu/m^3\;and\;216.43cfu/m^3$, respectively With gravitational sedimentation method, the average concentration of total microbe and fungus of apartmenthouse below 4 years are $100.63cfu/m^3\;and\;22.83cfu/m^3$, while apartment house over 4 years, $216.43cfu/m^3\;and\;70.000cfu/m^3$, respectively. 2. The I/O ratio of floating germ of apartment house below 4 years and over 4 years are 2.87 and 5.12 for total microbe, and 3.32 and 8.28 for fungus, respectively. The I/O ratio of falling germ of apartment house below 4 years and over 4 years are 1.55 and 2.81 for total microbe, and 2.85 and 4.08 for fungus, respectively. The apartment house below 4 years shows a low I/O ratio in all cases. 3. The difference in concentration of microbe between inside master bedroom and living room of apartment house below 4 years is $13.183cfu/m^3$, total microbe, and $4.787cfu/m^3$, fungus, while, apartment house over 4 years, $43.531cfu/m^3$, total microbe, and $21.932cfu/m^3$, fungus. The measured differences are statistically significant. 4. Air sampler was used to verify the difference in concentration of microbe with the age of apartment house. The difference in concentration of total microbe and fungus for outside apartment house below 4 years and over 4 years are $49.82cfu/m^3$ and $3.78cfu/m^3$, respectively. The difference of inside living room shows $160.23cfu/m^3$ for total microbe and $28.01cfu/m^3$ for fungus, and the difference of inside master bedroom shows $225.43cfu/m^3$ for total microbe and $56.73cfu/m^3$ for fungus. The differences are statistically significant. The difference in concentration of outside apartment house below 4 years and years 4 years are $34.66cfu/m^3$, total microbe, and $15.66cfu/m^3$, fungus, while inside apartment house below 4 years and over 4 years, $196.93cfu/m^3,\;and\;78.67cfu/m^3$, respectively. The measured differences are statistically significant.

• Journal of the Korean Applied Science and Technology
• /
• v.23 no.1
• /
• pp.1-11
• /
• 2006

The W/O emulsion was formed by mixing hydrophobic nonion surfactants of span 80 and tween 60 with kerosine, and by adding sodium silicate aqueous solution. Precipitating the W/O emulsion by sodium bicarbonate resulted in spherical silica particles. Shape and size distribution of silica particles were observed. The particles were spherical and they have narrow size distribution. Particle sizes were 9.29, 7.39 and $5.73\;{\mu}m$ at homogenizer speed of 2500, 3000, and 3500 rpm, respectively. The particle size was decreased by increasing agitation speed due to the formation of emulsion droplet. At fixed agitation speed, absorbed paraffin oil weight were measured and the $SiO_2/Na_2O$ mole ratio effects on particle size were investigated. Particle size was decreased by increasing the mole ratio of $SiO_2/Na_2O$.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.23 no.2
• /
• pp.464-472
• /
• 2009

The aim of this study was to investigate the effects of Cheonghyul-san on the generation of peroxynitrite ($ONOO^-$), nitric oxide (NO) and superoxide anion radical ( ${\cdot}\;O_2^-$), and on the expression of NF-${\kappa}$B-dependent proinflammatory proteins in ob/ob mice. Mice were grouped and treated for 5 weeks as follows. Both the normal lean (C57BL/6J black mice) and control obese (ob/ob mice) groups have received the standard chow. The experimental groups were fed with a diet of chow supplemented with 7.5, 15 and 30 mg Cheonghyul-san per 1 kg of body weight for 14 days. For this study, the fluorescent probes, namely 2',7'-dichlorodihydrofluorescein diacetate (DCFDA), 4,5-diaminofluorescein-2 (DAF-2) and dihydrorhodamine 123 (DHR 123) were used. Western blot was performed using anti-IKK-${\alpha}$, anti-phospho I${\kappa}$B-${\alpha}$, anti-NF-${\kappa}$B (p50, p65), anti-COX-2, anti-iNOS, anti-VCAM-1 antibodies, respectively. Cheonghyul-san prevented $H_2O_2$-induced cell death. Cheonghyul-san inhibited the generation of $ONOO^-$, NO and ${\cdot}\;O_2^-$ in the $H_2O_2$-treated LLC-$PK_1$ cells. The generation of $ONOO^-$, NO and ${\cdot}\;O_2^-$ were inhibited in the Cheonghyul-san-administered ob/ob mice groups. The GSH/GSSG ratio was decreased in the ob/ob mice, whereas the ratio was improved in the Cheonghyul-san-administered groups. Cheonghyul-san inhibited the protein expression levels of phospho-I${\kappa}$B-${\alpha}$, IKK-${\alpha}$, NF-${\kappa}$B (p50, p65), COX-2, iNOS and VCAM-1 genes. These results suggest that Cheonghyul-san is an effective scavenger of $ONOO^-$, ${\cdot}\;O_2^-$ and NO, and has an inhibitory effect on the expression of NF-${\kappa}$B-dependent inflammatory genes in ob/ob mice. Therefore, Cheonghyul-san might be used as a potential therapeutic drug against the diabetes- and obesity-related proinflammatory diseases.

• Journal of ILASS-Korea
• /
• v.20 no.4
• /
• pp.261-267
• /
• 2015

The main purpose of this study is to provide the information of soot generation of toluene fuel droplet. To achieve this, this paper provides the experimental results on the different initial diameter of toluene droplet combustion characteristics conducted under equivalent ambient pressure ($P_{amb}$) and oxygen concentration ($O_2$) conditions. Visualization of single fuel droplet was performed with high resolution CCD camera and visualization system. At the same time, ambient pressure ($P_{amb}$) and oxygen concentration ($O_2$) were maintained by ambient condition control system. Soot volume fraction ($f_v$) was analyzed and compared on the basis of intensity ratio ($I/I_0$) of background image. The result of soot generation was almost the same regardless of initial droplet diameter since thermophoretic flux is not much changed under the same ambient conditions. Soot standoff ratio (SSR) of 2 mm diameter showed unstable variation characteristics due to the short available measuring time.

• YAKHAK HOEJI
• /
• v.25 no.1
• /
• pp.27-35
• /
• 1981

Etomidoline is a new synthetic atropine-like drug. The present investigation aimed to study the combined effects of etomidoline and neofopam hydrochloride which has an analgesic and muscle relaxant activity, compared with the effects of each drugs. Acute toxicities (ID$_{50}$) in mouse were 132mg/Kg (p.o.) and 49mg/Kg (i.p.) when combination ratio of etomidoline and neofopam was 1:5 and 103 mg/Kg (p.o.) and 30mg/Kg (i.p.) with the ratio of 1:10. Etomidoline showed more potent anticholinergic effects than neofopam in the isolated rat intestine. Whereas, antibarium effects were twice as active with neofopam than with etomidoline. When etomidoline and neofopam were added in combination ratio of 1 : 5, papaverine-like avtivity was increased, but no changes of anticholinergic effect were observed. Analgesic effect was measured by the anti-writhing method of Whittle in mice. Both of the concurrent and single administration of etomidoline and nefopam reduced significantly the writhing number and the effect of the concurrent administration was more active than that of single, and 1 : 5 combination was slightly more potent than 1:10. Each drug or the combined drug was administered to mice and observed the change of the pupil size. Pupil sizes were increased with each drug and with combined drug, although there were no significant differences between the each group of drugs. However, those effects were less than that of atropine sulfate.e.

• Current Photovoltaic Research
• /
• v.3 no.1
• /
• pp.32-38
• /
• 2015

CIGS solar cell consisted of various films. In this research, we investigated electrode materials in $Cu(In,Ga)Se_2$ (CIGS) cells, including Al-doped ZnO (ZnO:Al), intrinsic ZnO (i-ZnO), and Al films. The sputtered ZnO:Al film with a sputtering power at 200W showed the lowest series resistance and highest cell efficiency. The electrical resistivity of the 200-W sputtered ZnO:Al film was $5.2{\times}10^{-4}{\Omega}{\cdot}cm$ by the rapid thermal annealing at $200^{\circ}C$ for 1 min. The electrical resistivity of i-ZnO was not measurable due to its high resistance. But the optical transmittance was highest with less oxygen supply and high efficiency cell was achieved with $O_2/(Ar+O_2)$ ratio was 1% due to the increase of short-circuit current. No significant change in the cell performance by inserting a Ni layer between Al and ZnO:Al films was observed.

• Preventive Nutrition and Food Science
• /
• v.20 no.3
• /
• pp.176-182
• /
• 2015

Abalone protein was hydrolyzed by enzymatic hydrolysis and the optimal enzyme/substrate (E/S) ratios were determined. Abalone protein hydrolysates (APH) produced by Protamex at E/S ratio of 1:100 showed angiotensin I converting enzyme inhibitory activity with $IC_{50}$ of 0.46 mg/mL, and APH obtained by Flavourzyme at E/S ratio of 1:100 possessed the oxygen radical absorbance capacity value of $457.6{\mu}M$ trolox equivalent/mg sample. Flavourzyme abalone protein hydrolysates (FAPH) also exhibited $H_2O_2$ scavenging activity with $IC_{50}$ of 0.48 mg/mL and $Fe^{2+}$+ chelating activity with $IC_{50}$ of 2.26 mg/mL as well as high reducing power. FAPH significantly (P<0.05) protected $H_2O_2$-induced hepatic cell damage in cultured hepatocytes, and the cell viability was restored to 90.27% in the presence of FAPH. FAPH exhibited 46.20% intracellular ROS scavenging activity and 57.89% lipid peroxidation inhibition activity in cultured hepatocytes. Overall, APH may be useful as an ingredient for functional foods.

• Korean Journal of Materials Research
• /
• v.29 no.1
• /
• pp.37-42
• /
• 2019

This study investigates Ag coated $Cu_2O$ nanoparticles that are produced with a changing molar ratio of Ag and $Cu_2O$. The results of XRD analysis reveal that each nanoparticle has a diffraction pattern peculiar to Ag and $Cu_2O$ determination, and SEM image analysis confirms that Ag is partially coated on the surface of $Cu_2O$ nanoparticles. The conductive paste with Ag coated $Cu_2O$ nanoparticles approaches the specific resistance of $6.4{\Omega}{\cdot}cm$ for silver paste(SP) as $(Ag)/(Cu_2O)$ the molar ratio increases. The paste(containing 70 % content and average a 100 nm particle size for the silver nanoparticles) for commercial use for mounting with a fine line width of $100{\mu}m$ or less has a surface resistance of 5 to $20{\mu}{\Omega}{\cdot}cm$, while in this research an Ag coated $Cu_2O$ paste has a larger surface resistance, which is disadvantageous. Its performance deteriorates as a material required for application of a fine line width electrode for a touch panel. A touch panel module that utilizes a nano imprinting technique of $10{\mu}m$ or less is expected to be used as an electrode material for electric and electronic parts where large precision(mounting with fine line width) is not required.

• Nuclear Engineering and Technology
• /
• v.53 no.6
• /
• pp.2000-2010
• /
• 2021

Mechanical moduli, such as Young's modulus (E), Bulks modulus (B), Shear modulus (S), longitudinal modulus (L), Poisson's ratio (σ) and micro Hardness (H) were theoretically calculated for (100-x)TeO₂+x MgO glasses, where x = 10, 20, 30, 40 and 45 mol%, based on the Makishima-Mackenzie model. The estimated results showed that the mechanical moduli and the microhardness of the glasses were improved with the increase of the MgO contents in the TM glasses, while Poisson's ratio decreased with the increase in MgO content. Moreover, the radiation shielding capacity was evaluated for the studied TM glasses. Thus, the linear attenuation coefficient (LAC), mass attenuation coefficient (MAC), transmission factor (TF) and half-value thickness (𝚫_0.5) were simulated for gamma photon energies between 0.344 and 1.406 MeV. The simulated results showed that glass TM10 with 10 mol % MgO possess the highest LAC and varied in the range between 0.259 and 0.711 cm^-1, while TM45 glass with 45 mol % MgO possess the lowest LAC and vary in the range between 0.223 and 0.587 cm^-1 at gamma photon energies between 0.344 and 1.406 MeV. Furthermore, the BXCOM program was applied to calculate the effective atomic number (Z_eff), equivalent atomic number (Z_eq) and buildup factors (EBF and EABF) of the glasses. The effective removal cross-section for the fast neutrons (ERCSFN, ∑_R) was also calculated theoretically. The received data depicts that the lowest ∑_R was achieved for TM10 glasses, where ∑_R = 0.0193 cm² g^-1, while TM45 possesses the highest ERCSFN where ∑_R = 0.0215 cm² g^-1.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.5 no.2
• /
• pp.60-68
• /
• 1997

Rayleigh Scattering Cross Sections($\sigma$i) of various gases and the temperature distributions of premixes C3H8/O2 flame are measured by high power KrF(248nm) Exci- mer laser and ICCD camera. Results show that $\sigma$i of O2 and Propane(C3H8) gases agree well in the 5% error range, but of H2 has the more or less difference from the calcul- ated value by other groups. This is attributed to the low RS signal of H2 to Nosie level(S/N ratio). The temperature distributions of flame range out between 300K in the air and about 2000K in the burned area. In this temperature range, out system has the about 250K temperature resolution. Because low RS signals in the reaction area with high temperature are affected highly by noises, temperature uncertainty of this area is relatively high to another part of flame. Experimental results show that UV Rayleigh Scattering can be used for the measurement of mixing ratio of mixed gases and the temperature distributions of flame. Especially, this technique can be applied for the measurement of the mixing ratio of air/fuel before the ignition and the flame structure after the ignition inside the Engine.