• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.453-456
• /
• 2009

In this paper, a Microstrip antenna for wireless LAN is designed in HyperLAN 5GHz. The IEEE 802.11a have allocated HyperLAN band. We proposed CPW-fed antenna structure for compact antenna. This structure shows that a ground plane and a patch plane are existed at one layer. The proposed antenna is designed on FR-4 substrate with a relative dielectric constant 4.3, thickness of 1.5mm and tangent loss 0.02. The designed antenna shows that VSWR is below 2 and has good return loss below -10dB over the 5.725~5.825GHz bandwidth with HyperLAN.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.6
• /
• pp.1275-1279
• /
• 2012

In this paper, we design of dual-band microstrip antenna for wireless communication. We used IEEE 802.11a and Hyper LAN (5.725~5.825 GHz). The proposed antenna substrate is FR-4, size is $22mm{\times}23mm$, thickness is 1.6mm and used to CST Microwave Studio 2010 program. As a result the simulation has good result and good return loss below -10 dB at 5 GHz and 5.8 bandwidth.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.6 s.324
• /
• pp.93-99
• /
• 2004

According to rapid increment of demand for wireless Local Area Network (LAN), the HyperLAN of 5.1-533GHz and 5.725-5.825GHz is newly allocated for wireless LAM in many regions over the world. Also, because most of mobile communication equipments are small, the size of antenna is important factor of effective design. In this paper, the compacted and wide bandwidth antenna is designed for wireless LAN at 5GHz band. Although the structure of U-shaped slot antenna is simple, It has large bandwidth of $10-40\%$. Also, the U-slot antenna has good radiation pattern. However, in general, the size of U-slot antenna is large. Therefore, it is difficult to apply to wireless equipment such as PDA and Notebook. This proposed antenna has a wide bandwidth by U-shaped slot in rectangular patch and is compacted by using two layered dielectric substrates and foam. For the design of U-slot antenna, the Finite Difference Time Domain method is applied. Also, the method of MPI parallel program is used for the enhancement of the analyzing speed of the FDTD method.

• Proceedings of the Korea Contents Association Conference
• /
• 2006.05a
• /
• pp.479-482
• /
• 2006

Mobile Telemedicine uses common technologies that provide a conduit for information exchange between physicians nurses and patients. In addition to patient records, medical professionals will obtain vital signs and other reference data through Ubiquitous Sensor networks(USN). In this paper about a design and implementation of RFID reader platform that received RFID tag information from patients tags, transmit the data to SBC(Single board computer) based on Intel PXA255 ARM CPU and SBC transmit the data to MySQL server in hospital using by Wireless Internet. his system that based on Embedded Linux is composed of RFID module, ARM processor, RS-232 interface, and Wireless LAN. This paper also provides a brief overview and concept of RFID reader, and proposes the design and implementations of the RFID reader platform used QT and MySQL based on Embedded Linux.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.1
• /
• pp.28-35
• /
• 2010

In this paper, we designed and fabricated a ultra-wideband(UWB) bandpass filter with a good performance of a stopband, and a notched band in passband. The transformed equivalent circuit of the highpass filter was realized by distributed element. A wide-passband with 3-dB fractional bandwidth of more than 100 % was achieved by using optimum response of the HPF. For improving lower and upper stopband characteristic, a cross coupling between feed lines was employed, which was analyzed by desegmentation technique. In order to reject interference of Wireless LAN and Hyper LAN(5.15~5.825 GHz), the narrow notched(rejection) band was realized by a spurline. The fabricated BPF indicated the passband from 3.1 to 10.55 GHz and the flat group delay of less than 0.94 ns over the entire passband except the rejection band. The filter shown sharp attenuation both inside and outside the band and notched band from 5.2 to 6.12 GHz.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.6
• /
• pp.223-229
• /
• 2023

This papart proposes single pole double throw (SPDT) switch with six-stage radial stub resonators in the 3.6~4.0 GHz band. The switch was simulated using ADS (Advanced Design Software), a design tool for the wireless communication circuits, and evaluated on a pcb substrate. The measurement results of the radial SPDT switch showed an average 90 dB isolation, and 1.5 dB insertion loss. This isolation characteristic was 20 dB superior to higher than those laboratory or commercial products reported thus far. The proposed SPDT switch is applicable to multi-band RF front-end systems, such as WiMAX, LTE/5G, Wi-Fi, and HyperLAN.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.34 no.2
• /
• pp.281-288
• /
• 2024

The sixth generation(6G) wireless communication technology is advancing toward ultra-high speed, ultra-high bandwidth, and hyper-connectivity. With the development of communication technologies, the formation of a hyper-connected society is rapidly accelerating, expanding from the IoT(Internet of Things) to the IoE(Internet of Everything). However, at the same time, security threats targeting IoT devices have become widespread, and there are concerns about security incidents such as unauthorized access and information leakage. As a result, the need for security-enhancing solutions is increasing. In this paper, we implement an autoencoder-based anomaly detection model utilizing real-time collected network traffics in respond to IoT security threats. Considering the difficulty of capturing IoT device traffic data for each attack in real IoT environments, we use an unsupervised learning-based autoencoder and implement 6 different autoencoder models based on the use of noise in the training data and the dimensions of the latent space. By comparing the model performance through experiments, we provide a performance evaluation of the anomaly detection model for detecting abnormal network traffic.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.26 no.4
• /
• pp.1025-1036
• /
• 2016

The conversion of the international standard web utilization HTML5 technology is being developed for improvement of the internet environment based on nonstandard technology like ActiveX. Hyper Text Markup Language 5 (HTML5) of basic programming language for creating a web page is designed to consider the security more than HTML4. However, the range of attacks increased and a variety of security threats generated from HTML4 environment inherited by new HTML5 API. In this paper, we focus on the script-based attack such as CSRF (Cross-Site Request Forgery), Cookie Sniffing, and HTML5 API such as CORS (Cross-Origin Resource Sharing), Geolocation API related with the infringement of the personal information. We reproduced the infringement cases actually and embodied a detection module of a Plug-in type diagnosed based on client. The scanner allows it to detect and respond to the vulnerability of HTML5 previously, thereby self-diagnosing the reliability of HTML5-based web applications or web pages. In a case of a new vulnerability, it also easy to enlarge by adding another detection module.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.2
• /
• pp.247-253
• /
• 2008

In this paper, we describes the design and implementation of real-time management system for efficient operation via monitoring and control of MCC(Motor Control Center). The real-tine management system can be divided hardware(MCC panel) and software(management program). First, hardware is divided into load attaching motor and MCC components for working together control and data network. Second, software(management system) are consisted of communication interface, environment setting, data processing modules. The produced and implemented reduction model of MCC panel is pretested using m-PRO, iM-PRO devices, and HyperTerminal. For field test, MCC panel is tested by RS-232C/485, communication procedure in management system is certified by transmitting and receiving message using control command. By the experimental results, the implemented real-time management system can be used to operate MCC system.