• Journal of Mushroom
• /
• v.16 no.2
• /
• pp.79-85
• /
• 2018

This study was carried out to separately assess the production of post-culture, germinating, growing, and resting stages of Lentinula edodes grown in a smart cultivation facility based on ICT technology. The cultivation environment of the greenhouse facility was controlled to remain at different set points throughout a range of high ambient temperatures. Production of Sanjo-701-ho, which is a typical summer cultivar, and the new cultivar Sanjo-701-ho were tested in this ICT-based smart cultivation system. Sanjo-701-ho produced 353.7 g/bag of mushrooms from June to October, while Sanjo-701-ho produced 270.4 g/bag. These production amounts were stable over the high-temperature range of $20-35^{\circ}C$.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.16 no.4
• /
• pp.364-374
• /
• 2006

Natural ventilation technique could be the substitute for or the complement to the local exhaust ventilation system in the sense of protecting work environment. Moreover, it has many strong points ; almost no mechanical parts, no energy use and no noise. If applied appropriately, it could have the very high ventilation rate and save a lot of energy expense. But, it depends on the outdoor environment, especially temperature and wind speed/direction. Predicting the capacity of natural ventilation is not an easy job because it comes from both buoyancy and wind effect. Another problem is too much flow through the ventilator especially in winter time due to too much difference between indoor and outdoor temperature. Thus some ventilators in industries are sealed by door or plastic sheet, resulting in bad work environment. Various types of dampers are used to control the flow rate through ventilators. The capabilities of flow control by damper has not been estimated. In addition, it was not tested whether the damper could obstruct the flow through ventilator when fully opened. To answer these questions, 4 types of dampers were tested by using computational fluid dynamics. 10 different configurations includes no damper, full open and half open. Flow rates were estimated and airflow fields were analysed to clarify the before-mentioned questions. The dual type damper was the best choice for controling the capability of ventilator. In addition, the upward grill type damper was the best for not obstructing the air flow when fully opened.

• The Journal of Korean Society for School & Community Health Education
• /
• v.20 no.3
• /
• pp.91-100
• /
• 2019

Purpose: The purpose of this study was to investigate the sexual function of male patients receiving rectal cancer and to analyze the factors related to sexual function. Methods: This study included 71 male patients undergoing outpatient treatment after surgery at C University Hospital, Chonnam, Korea from April 1 to September 1, 2014. The sexual function of males with colorectal cancer was calculated using the Korean Translation of International Index of Erectile Function(IIEF). Data analysis was performed using t-test, ANOVA, and regression analysis. The study was IRB approved. Results: The sexual function index scores of the subjects were 33.28±19.47 points. Regression analysis showed that sexual function increased as the duration after operation increased(p=.001), higher location of cancer(p=.007), age decreased(p=.013). The explanatory power (adj. R2) of the analysis model was 0.186. Conclusion: Sexual function of males with rectal cancer differed according to duration after operation, and location of cancer, age. Therefore, medical staff think that it can be used as basic data for appropriate education and counseling by age, time, and type of treatment to improve sexual function of men with rectal cancer.

• Korean Journal of Materials Research
• /
• v.4 no.1
• /
• pp.90-96
• /
• 1994

ZnO thin films were deposited using Diethylzinc and $N_{2}O$ gas by plasma enhanced CVD (PECVD) at low substrate temperatures below $300^{\circ}C$. The effect of deposition parameters on the growth rate and the structural properties was determined at various deposition conditions. Crystallized ZnO thin films were successfully deposited even at $150^{\circ}C$ of substrate temperature. Above $200^{\circ}C$ c-axis oriented ZnO thin films, of which a standard deviation of X-ray rocking curve was less than $6^{\circ}$. were deposited on glass substrates. The variation of deposition rate showed different trends depending on substrate temperature and rf-input power. According to the deposition rate behavior as a function of substrate temperature, the transition points were observed resulting from crystallization of ZnO thin films. The activation energies for the deposition of ZnO thin films were 3.1KJ/mol and 1.9KJ/mol for the rf powers of 200W and 250W, respectively.

• Journal of Korean Society of Forest Science
• /
• v.103 no.2
• /
• pp.258-263
• /
• 2014

The purpose of this study is to provide basic data for forest roads management by using AHP methodology to group the grade of disaster risk. In addition to this, a field study was performed at 114 targeted points on forest roads where there are high risks of disaster occurrence. The results of the field survey and the analysis of AHP were compared to provide the degree of disaster risks. It shows that the drainage facilities occupied the highest weighted value. Meanwhile, based on AHP analysis data, evaluation chart was created by providing evaluation criteria and evaluation score to each evaluation items. As a result of applying the evaluation chart to the field survey data, the highest score was 78.8 and the lowest score was 42.7 with the mean score of 61.8. Finally, through the experts' consultation based on calculated scores, this study proposed four different groups of disaster risk on forest roads.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.9
• /
• pp.825-834
• /
• 2008

Nose chine shape optimization study has been performed to maximize the directional stability at high angle of attack supersonic flow. Various chine shapes are generated using super ellipse equation. By numerically investigating the directional stability characteristics of those shapes, the baseline configuration for the shape optimization has been selected using the three-dimensional Navier-Stokes equations. The configuration is represented by the NURBS curves which can adjust the surface geometry by the control points. The response surfaces are constructed to obtain optimum shape which has high directional stability characteristics and lift-to-drag ratio. From this study, an efficient configuration design and optimization process which utilizes the parameter-based configuration generation techniques and approximation method has been established, then 29% improvement of the directional stability by strong vortexes from chine nose is accomplished.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.277-277
• /
• 2013

The epitaxial graphene on the 4H- or 6H-SiC(0001) surface has been intensively studied due to the possibility of wafer-scale growt. However the existence of interface layer (zero layer graphene) and its influence on the upper graphene layer have been considered as one of the main obstarcles for the industrial application. Among various methods tried to overcome the strong interaction with the substrate through the interface layer, it has been proved that the hydrogen intercalation successfully passivate the Si dangling bond of the substrate and can produce the quasi-free standing epitaxial graphene (QFEG) layers on the siC(0001) surface. In this study, we report the results of the angle-resolved photoemission spectroscopy (ARPES) and Raman spectroscopy for the QFEG layers produced by ex-situ and in-situ hydrogen intercalation.From the ARPES measurement, we confirmed that the Dirac points of QFEG layers exactly coincide with the Fermi level. The band structure of QFEG layer are sustainable upon thermal heating up to 1100 K and robust against the deposition of several metals andmolecular deposition. We also investigated the strain of the QFEG layers by using Raman spectroscopy measurement. From the change of the 2D peak position of graphene Raman spectrum, we found out that unlike the strong compressive strain in the normal epitaxial graphene on the SiC(0001) surface, the strain of the QFEG layer are significantly released and almost similar to that of the mechanically exfoliated graphene on the silicon oxide substrate. These results indicated that various ideas proposed for the ideal free-standing graphene can be tested based on the QFEG graphene layers grown on the SiC(0001) surface.

• Journal of Fashion Business
• /
• v.12 no.4
• /
• pp.158-169
• /
• 2008

This study aims to survey the perceptions held by students and field workers regarding the clothing-related qualification certificates, which can serve as the base for becoming clothing professionals, to compare and analyze the actual state of qualification certificates on the basic research level, and thus to search for the directions suitable for the clothing-related qualification certificates. The questionnaire method was selected for the study. The responses of 406 copies from students and 81 copies from field workers were used, and frequency analysis and t-test were done with the assistance of spss 10.0 statistics program, The findings are as follows. First, as to the qualification certificates perceived by the students, the certificates of colorist engineer and colorist industrial engineer were known most. 237 students, or 58.4% of the student respondents, had obtained the information about the qualification certificates mainly through the internet and mass media, and 77.3% of the students had a plan to get the qualification certificates. Second, as to the qualification certificates perceived by the field workers, the respondents indicated that school grades(43.2%) would be given the highest additional points at the time of employment, while the clothing-related qualification certificates gathered low responses of 11.1%. The field workers perceived that the qualification certificate of Western suit engineer(pattern) was needed for the job, while 45.4% of them perceived that no qualification certificate was required for the job. Third, both the students and the field workers showed low acquisition levels of the qualification certificates, and in view of their perceptions that the qualification certificates of languages or computer skills were more useful, the improvement is needed in order for the national certificates for the clothing-related skill qualification to develop in the more job-related directions.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.53 no.1
• /
• pp.60-66
• /
• 2017

This study researched the population of ecological characteristics of the goldeyes rockfish Sebasetes thompsoni sampled by gill net in the Ulleungdo area from February 2013 to February 2014 in order to assess the current stock status and provide scientific advice for management implementation. The instantaneous coefficient of total mortality (Z) was 0.78/year and the survival rate (S) was 0.459. The instantaneous coefficient of natural mortality (M) was 0.461/year. Based on the estimates of Z and M, the instantaneous coefficient of fishing mortality (F) was 0.318/year. The age at first capture ($t_c$) was 4.41/years. Current Yield-per-recruit (YPR) was 30.83 g, and fishing mortality at maximum YPR ($F_{max}$) and fishing mortality corresponding to 10% of the maximum slope in YPR curve ($F_{0.1}$) were 3.257/year and 0.673/year, respectively. $F_{35%}$ and $F_{40%}$, indicating fishing mortalities at 35% and 40% of maximum Spawning biomass-per-recruit (SBPR), were 0.619/year and 0.509/year, respectively. Based on the biological reference points, fishing mortality at overfished threshold yield ($F_{OTY}$) was calculated as 0.509/year. Current $SBPR/SBPR_{MSY}$ was 1.313 above 1.0, which means 'not overfishe,' while current $F/F_{OTY}$ was 0.629 below 1.0, which indicates 'not overfishing.' In conclusion, the current status of goldeyes rockfish was located in green zone (i.e., not overfished and not overfishing) according to the revised Kobe plot.

• Journal of the Korean Institute of Oriental Medical Informatics
• /
• v.18 no.1
• /
• pp.78-115
• /
• 2012

Pulse diagnosis has been highly valued in many East Asian medical books, since "Huangdaineijing(黃帝內經)" published. Gigoo-inyoung pulse method(氣口人迎脈法) is one of the four pulse diagnostic methods originally written in"Huangdaineijing(黃帝內經)". At the late 3rd century, "Maijing(脈經)" redefined the positions of Gigoo-inyoung pulse(氣口人迎脈). According to "Maijing(脈經)", both spots were 1fen(分) in front of guan(關) but Gigoo on the right hand and Inyoung on the left hand. At the middle of 13th century, "Maekgyolejijangbyungsikdoseol(脈訣指掌病式圖說)" had detailed view points about the manner of reading Gigoo-inyoung pulse. "Maekgyolejijangbyungsikdoseol(脈訣指掌病式圖說)" explained clearly the position of 1fen(分) in front of guan(關) by sketch of wrist. The location indicated the border of cun(寸) and guan(關). It also explained clearly corresponding certain cun-guan-chi(寸關尺) with Gigoo-inyoung pulse by sketch. "Euihackipmoon(醫學入門)" is a comprehensive book on medicine written by Lee-Cheon(李梴) in Ming(明) dynasty. In this book, pulse diagnosis is the most emphasized method among the four techniques of diagnosis(四診). Furthermore, it introduces detailed information about Gigoo-inyoung pulse method(氣口人迎脈法) in "Gigoo-inyoungmaekgyole(氣口人迎脈訣)". Lee-Cheon concured in the theory of "Yeongruegumbang(永類鈐方)" and "Maekgyolejijangbyungsikdoseol(脈訣指掌病式圖說)" and put a short essay about Gigoo-inyoung pulse named "Gigoo-inyoungmaekgyole(氣口人迎脈訣)" quoted from the two books. Therefore, throughout many chapters of "Euihackipmoon(醫學入門)", Gigoo-inyoung pulse is used in order to distinguish internal damage(內傷) and external contraction(外感). "Maekgyolejijangbyungsikdoseol(脈訣指掌病式圖說)" and "Euihackipmoon(醫學入門)" understood Gigoo-inyoung pulse commonly by corresponding certain cun-guan-chi(寸關尺) with Gigoo-inyoung pulse. Therefrom, Gigoo-inyoung pulse can distinguish seven emotions(七情) of internal damage(內傷) or six excesses(六淫) of external contraction(外感).