• 한국가스학회지
• /
• 제27권2호
• /
• pp.95-103
• /
• 2023

본 논문에서는 가스압력을 고려할 때 수소가스 저장용기(Type 1)의 거동특성을 평가하기 위해 ISO 18119의 노치형상에 따라 수소가스 저장용기에서 발생한 VMS(von Mises stress)을 유한요소법으로 해석하였다. 해석결과에 따르면 길이방향 노치에서 발생한 최대 VMS가 원주방향 노치보다 높게 발생하였다. 또한, 저장용기의 거동시 발생한 응력을 VMS와 재료의 항복강도 비인 응력비로 분석하였다. 해석결과에 따르면 노치가 길이방향으로 형성된 저장용기의 경우 가스압력 50 MPa에서 저장용기 내부와 외부가 각각 0.85와 0.50로 증가하였으나 1보다 낮게 분석되었다.

• 한국수소및신에너지학회논문집
• /
• 제16권3호
• /
• pp.262-268
• /
• 2005

[ $Zn(BH_4)_2$ ](8.4 wt% theoretical hydrogen storage capacity powders have been successfully synthesized by mechanochemical reaction from mixtures of $ZnCl_2$ and $NaBH_4$ powders in a 1:2 molar ratio in different times. $$ZnCl_2+2NaBH_4{\rightarrow}Zn(BH_4)_2+2NaCl$$ (1) $Zn(BH_4)_2$ powders were characterized by X-ray diffractometry(XRD), and Furier Transform Infrared spectrometry(FT-IR). The thermal stabilities of $Zn(BH_4)_2$ powders were studied by Differential scanning calorimetry(DSC), Thermogravimetry analysis(TGA), and Mass spectrometry(MS). $Zn(BH_4)_2$ can be tested for hydrogen evolution without further purification. The reaction to yield hydrogen is irreversible, the other products being compounds of Zn, and borane. $Zn(BH_4)_2$ thermally decomposes to release borane and hydrogen gas between about 85 and 150$^{\circ}C$.

• 한국수소및신에너지학회논문집
• /
• 제30권5호
• /
• pp.385-394
• /
• 2019

The analysis of temperature behavior of a hydrogen tank during refueling is of significance to clarify the safety of the compressed hydrogen storage in vehicles since the temperature at a tank rises with inflow of hydrogen. A mass balance and an energy balance were combined to obtain analytical model for temperature change during the hydrogen refueling. The equation was coupled to Peng-Robinson-Gasem (PRG) equation of state (EOS) for hydrogen. The PRG EOS was adopted after comparison with other four different cubic EOSs. A parameter of the model was determined to fit data from experiments of various inlet flow rates and temperatures. The temperature and pressure change with refueling time were obtained by the developed model. The calculation results revealed that the extent of precooling was more effective than the flow rate control.

• 한국안전학회지
• /
• 제34권5호
• /
• pp.7-14
• /
• 2019

The type III vessel, which is used to store high-pressure hydrogen gas, is made by wrapping the vessel's liner with carbon fiber composite materials for strength performance and lightening. The liner seals the internal gas and the composite resists the internal pressure. The properties of the fiber composite material depends on the angle and thickness of the fiber. Thus, engineers should consider these various design variables. However, it significantly increases the design cost due to the trial and error under designing based on experience or experiments. And, for aluminum liners, fatigue loads due to using and charging could give a huge impact on the performance of the structure. However, fatigue failure does not necessarily occur in the position under the highest load in use. Therefore, for hydrogen storage vessel, fatigue evaluation according to design patterns is essential because stress distribution varies depend on composite layer patterns. This study performed an optimization analysis and evaluated a high-pressure hydrogen storage vessel to minimize these trial and error and improve the reliability of the structure, while simultaneously conducting fatigue assessment of all patterns derived from the optimization analysis process. The results of this study are thought to be useful in the strength improvement and life design of composite reinforced high-pressure storage vessels.

• 전기화학회지
• /
• 제9권2호
• /
• pp.95-99
• /
• 2006

마이크로전극을 사용하여 니켈-수소 전지의 전극 활물질인 수소저장합금$(MmNi_{3.55}Co_{0.75}Mn_{0.4}Al_{0.3})$과 수산화니켈의 단일입자에 대하여 전기화학적 특성을 평가하였다. 즉 마이크로 전극을 활물질 입자 한 개 위에 전기적인 접촉을 이루도록 조정하고 전위 주사(Cyclic Voltammograms) 및 포텐셜 스텝(Potential Step)으로 실험을 실시하였다. 그 결과 수소저장 합금 입자의 경우 -0.9, -0.75, -0.65V 부근에서 3개의 산화 피크 및 -0.98V에서 수소발생 전위, 그리고 수산화니켈 입자의 경우 프로톤 산화 환원 반응(0.45V, 0.32V)과 산소 발생 반응 전위를 보다 명확하게 확인 할 수 있었다. 그리고 수소흡장합금 입자 내에서의 수소 흡장 및 방출 전 과정에 대해 수소 확산계수 $(D_{app})\;(10^{-9}\sim10^{-10}cm^2/s)$가 얻어졌다.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2001년도 춘계학술발표회요약집
• /
• pp.389-389
• /
• 2001

• 한국수소및신에너지학회논문집
• /
• 제19권5호
• /
• pp.394-402
• /
• 2008

The Effects of Cu or Ni additives co-added with Ce/Zr mixed oxides to Fe-based oxide mediums were investigated for the purpose of the replacement of Rh, a precious metal additive, in terms of hydrogen storage(reduction by hydrogen) and release(water splitting). From the results of temperature programmed reduction(TPR), initial reduction rate of iron oxide in the mediums was greatly increased with the addition of Cu, similar to that of Rh. For isothermal redox reaction of 10 cycles, the total amounts of hydrogen evolved in water splitting steps for the mediums added with Cu or Ni were highly maintained at ca. 7 mmol/g-material, even though the oxidation rates were slightly lower than that for the medium added with Rh. This result suggests that the replacement of Rh to Cu or Ni is possible as a co-additive for Fe-based oxide mediums.

• 대한금속재료학회지
• /
• 제50권12호
• /
• pp.949-953
• /
• 2012

$MgH_2$ was employed as a starting material instead of Mg in this work. A sample with a composition of 94 wt% $MgH_2-6$ wt% Ni (called $MgH_2-6Ni$) was prepared by reactive mechanical grinding. The hydriding and dehydriding properties were then examined. An $MgH_2-Ni$ hydrogen storage alloy that does not require an activation process was developed. The alloy was prepared in a planetary ball mill by grinding for 4 h at a ball disc revolution speed of 250 rpm under a hydrogen pressure of about 12 bar. The sample absorbed 3.74 wt% H for 5 min, 4.07 wt% H for 10 min, and 4.41 wt% H for 60 min at 573 K under 12 bar $H_2$, and desorbed 0.93 wt% H for 10 min, 1.99 wt% H for 30 min, and 3.16 wt% H for 60 min at 573 K under 1.0 bar $H_2$. $MgH_2-6Ni$ after reactive mechanical grinding contained ${\beta}-MgH_2$ (a room temperature form of $MgH_2$), Ni, ${\gamma}-MgH_2$ (a high pressure form of $MgH_2$), and a very small amount of MgO. Reactive mechanical grinding of Mg with Ni is considered to facilitate nucleation, and to reduce the particle size of Mg. $Mg_2Ni$ formed during reactive mechanical grinding also increases the hydriding and dehydriding rates of the sample.

• 한국수소및신에너지학회논문집
• /
• 제17권3호
• /
• pp.317-323
• /
• 2006

Electric conductive material should be homogeneously mixed with sulfur in sulfur electrode fabrication of lithium/sulfur battery, because sulfur is electric insulator. In this paper electrochemical properties of Li/S battery was studied with various compositions of sulfur electrodes. When content of sulfur changed from 40 wt.% to 80 wt.%, the 60 wt.% sulfur electrode showed the maximum capacity of 1489 mAh/g-sulfur. Electrochemical properties of Li/S battery using 60 wt.% sulfur was also investigated with various carbon contents. The discharge capacity changed as a function of carbon contents. The optimum composition was 25 wt.% carbon for 60 wt.% sulfur electrode.

• 한국가스학회지
• /
• 제26권3호
• /
• pp.38-44
• /
• 2022

전세계적으로 저탄소 친환경에너지로 다변화 정책이 진행되고 있으며, 그 정책 중 하나가 수소경제 활성화이다. 수소경제 활성화 정책으로 수소 공급을 위한 수소충전소의 보급이 가속화됨에 따라 사고발생의 위험도 커지고 있다. 수소의 폭발사고는 대부분 대형사고로 이어지기 때문에 수소에너지를 사용함에 있어 안전성을 확보하는 것은 매우 중요하다. 수소에너지를 활용하기 위해서는 액화수소의 생산, 저장, 운송 등에 사용될 수소저장 용기의 안전성 확보는 반드시 필요하다. 본 논문에서는 수소충전용 압력용기의 구조안전성을 평가하기 위해 가스 압력에 대한 거동특성을 유한요소해석으로 분석하였다. 압력용기의 재료는 SA-372 Grade J / Class 70을 사용하였고, 해석모델은 압력용기가 축대칭 형상이므로 1/4 형상만 고려하여 6면체 메쉬를 적용하였다. 수소가스 압력용기를 사용 최고 압력에서 유한요소해석을 하였으며, 해석 결과인 용기의 von Mises Stress와 변형량, 변형률 에너지 밀도를 관찰하였다.